Paco Kelly's Leverguns.com

2 dogs

I agree, the MP molds are absolutely beautiful. Ok, I promised to try to keep you guys up to date, so here is an updated version of the above graphic which shows the nose to crimp length of the various 640 designs along with the 311-440 and now the 308 150 grain MP hunting bullet. There are as you k...

2 dogs

Pastor Jim, I'm only 58, but every dang time I walk into the Dr's office and sit down to wait my turn, when I look around, everybody else in there is about 25-30 years older than me. I'm thinking that isn't a real good sign....

2 dogs

OK, it occurs to me, if someone asks how much is a MP mold, then maybe I am assuming you guys might already be all up to speed on the MP Molds. So, here is a drawing of the 640 32 caliber designs, with their relative nose to crimp lengths. The bullet on the right is the 311-440 (if my rememberer is ...

2 dogs

The prices vary a little but the 4 cavity molds are 155 ish and the 2 cavity molds are 130 ish depending on the cost of the materials and such. No, Veral makes a beautiful mold, but he does not make a mold this versatile. This one is a Cramer style mold and can be a Solid, or a Large HP or Cup HP. O...

2 dogs

I wanted to take a few minutes and make a few comments as to why I believe the MP Molds 327 Single Seven Mjolnir cast bullet may well be the single most well thought out and significant of all the 32 caliber 640 designs. First, in Old Norse, it is spelled: Mjǫllnir and is often commonly spelled Mjöl...

2 dogs

There are also a series of Cramer style molds called the 314-640 for the 32 calibers in 100, 115, and 135 grains with the large cavity HP. They also come with a solid pins and can be had with medium and cup point pins. There is also a 125 ish grainer on the drawing board. These have all been extreme...

2 dogs

First, I haven't been on here for some time, so a Hello to my old friends on here. I have a little something I think you guys might be interested in, especially you lever gun addicts who have an old 38-40 Carbine that needs a cast bullet to "slug up" to give best accuracy. First tho, I hav...

2 dogs

Updated.

http://singleactions.proboards.com/index.cgi?board=sas

2 dogs

http://singleactions.proboards.com/inde ... 015&page=1

2 dogs

No Sir, its 100,000! Most of the guys are pledging for 500-1000 so we could use a few more takers.

2 dogs

Meanwhile, be sure and gitchee some Callshot 44 special!!

2 dogs

OSOK, youre coming off a bit mean spirited...

Are you famous enough to float 100,000 cases? I might need some if you are! If not, the thread and links clearly state why we hold Steve Call in such high regard.

Cases are 100 bucks for 500 plus shipping.

2 dogs

Here is a link to a fun thread, we are working on a custom marked lot of 44 special brass and we are approaching the 30,000 mark.

http://www.rugerforum.com/phpBB/viewtopic.php?t=138236

2 dogs

I just want 5 minutes alone in a dark room with the man responsible for this thing.

5 minutes......

2 dogs

I would be interested to know how your new rifle shoots.

2 dogs

For my #5 project I needed special leather as well. While I'm no familiar with either of the 2 makers you mention, if you are looking for something special, I would suggest you have a look at barrantileather.com as he builds some fine wares. Im not sure he is taking orders at this time, nor is he fr...

2 dogs

I have both. My Ruger MkIII shot a cloverleaf at 25 yards with its first 3 shots......Its a keeper. It is the blue steel 5.5" bull barrel model. My Browning Buckmarks first 3 shots went into 1.5 inchs at 50 yards from seated. The ammo I was shooting in both guns is CCI mini mags. My Buckmark ha...

2 dogs

Catshooter, my humble thanks for your consideration. All my best, fermin

2 dogs

Mergus, if you need any help let me know!

2 dogs

Here are some pics of the Harton Custom #5 that master leatherbuilder Mike Barranti has taken:

http://barrantileather.com/Page_5.html

2 dogs

Kimwcook, I dont have my #5 right now. Boge Quinn is scrimshawing the ivory stocks for me. Hopefully, he will finish in my lifetime.....

Im hoping to see some nice pics too, as Boge is a fine photographer!

2 dogs

Catshooter, if you are going to quote me, please do it more accurately. I didn't say I ruined a barrel, I said I damaged a barrel. I damaged it with a allen wrench not the pin gauge. I was using the allen wrench to tap the pin guage out of the rifling and dinked the throat area. The barrel isnt ruin...

2 dogs

Mark, I do get around...BTW, Im STILL laughing my *** off about your original comments!!

2 dogs

Yeah, yeah, yeah. Im glad its over. We hadda listen to Boge all week long walk around saying, "Look what Terry gave me".....Meanwhile, we did at least get Murbach to exercise a little didnt we?

2 dogs

JT's "Book of the 44" has a review of current available factory 44 special loads along with lots of other information. Its the best book on 44's available.

2 dogs

If it is a 44 mag, plain blue, with nice stocks, 2400 is not out of line nowadays. If it is a rare 45 or an even rarer 41 mag, no telling how much it would go for. CCH and fancy wood all add to the price...

2 dogs

Try a full house 475 Linebaugh....the 44 dont seem so big after that....

2 dogs

I have it. I got a copy for 35 bucks or so. Really lets you in how much of a outdoorsman The Grand Old Man was! Great book IMO.

2 dogs

Welcome back Scott, what news do you have for us!

2 dogs

If I had a 25-20 lever action, I would naturally have to pony up for a custom single action to go with it.....

2 dogs

I have sat back and read this thread for days now. Scott and Charles have been right on. But then again, they are from South Texas and have a pretty good handle on things. A wall is just wrong. For whatever reason. Smacks of Communism to me. Besides, a pretty good body of water separates Florida fro...

2 dogs

This is an interesting thread. Certainly, if you are not from down here near the border, your point of view is driven by the news..... OTOH, if you are from down here, there is really no way to explain it to someone who isnt. I will say I dont disagree with anything Charles has to say about it and h...

2 dogs

JJ, please send me an email Sir. Some of us have been looking to contact you. fcgarza0640@hotmail.com or 361 960 3697. Your presence is requested. All my best, Fermin Garza

2 dogs

Fermin C. Garza, I dont post alot here but I would be happy to help a fellow shooter if I could....

Search found 34 matches

Re: MP Molds 327 Single Seven Mjolnir Group Buy

Re: For the older guys on this Forum

Re: MP Molds 327 Single Seven Mjolnir Group Buy

Re: MP Molds 327 Single Seven Mjolnir Group Buy

MP Molds 327 Single Seven Mjolnir Group Buy

Re: A MP molds 38-40 Carbine mold

A MP molds 38-40 Carbine mold

Re: Custom Front sight blanks!

Custom Front sight blanks!

Re: Big 44 special group buy!!!!

Re: If leverguns.com were to headstamp brass, what caliber?

Re: Big 44 special group buy!!!!

Big 44 special group buy!!!!

Re: Mosberg Tactical Lever Gun

Re: OT - Ruger #1B in 22 Hornet

Re: OT: Custom leather and interaction w/ two makers ...

Re: o/t Ruger or Brownings 22 pistols

Re: Article: 6 Gun Barrel Leading and Firelapping

Re: Article: 6 Gun Barrel Leading and Firelapping

Re: Article: 6 Gun Barrel Leading and Firelapping

Re: Article: 6 Gun Barrel Leading and Firelapping

Re: Article: 6 Gun Barrel Leading and Firelapping

Re: Article: 6 Gun Barrel Leading and Firelapping

Re: OT - Terry Murbach do you still have your Skeeter Ruger?

Re: 44 Special bullets - do any work?

Re: Price check: Texas Longhorn Arms #5