Paco Kelly's Leverguns.com

JimT

The Modle 97 has a transfer bar that works just like all transfer bars. The Model 83 has a sliding block that goes between the hammer and the frame. To activate it the hammer is pulled about 1/8" or a bit more to the rear, just lifting it off the receiver, and then lowered into place. (EDIT) Wh...

JimT

While this is a nice sentiment, quite frankly our problems run much deeper. Republicans feel that ANY Republican is better than a Democrat. So they will back an anti-gun pro-abortion Sociallist Republican over an anti-gun pro-abortion Socialist Democrat. The Democrats feel that ANY Democrat is bette...

JimT

Mr. Davis was with us on last year's Safari. He used the Hornady LeveRevolution factory ammo. It worked just find on Wildebeest and Warthog.

He also took a Bison here in the States using it. He got complete penetration side to side on the Bison.

JimT

I have an Ithaca Model 49 in .22 Mag --- power level in penetrating steel is about like a .357 out of a sixgun. There is no comparison to the .22 Long Rifle. When fired from a long gun the .22 Magnum shines. It is a totally different creature than when fired from a sixgun. They are more expensive to...

JimT

Here are the velocities we recorded in carbines and handguns ...

http://www.leverguns.com/articles/rifle_handgundata.htm

JimT

3) Larger diameter bullets will stabilize better, and destroy more tissue (other things being equal)." From OVERKILL AND UNDERKILL by Dr. Chris Ryan http://www.leverguns.com/articles/overkill.htm I'm not sure I understand the physics of a larger diameter bullet stabilizing better than a small ...

JimT

Very good Jim. On a sidenote, there was a guy yesterday who was filmed by surveilance video toting a whole suitcase full of knives and a meat cleaver to an upscale psychiatrists office. Chopped her up dead and nearly killed her companion who came to her aid. Another "gun free" zone of cou...

JimT

I enjoyed meeting you. I felt bad that I had to leave early and not meet the rest of the crew who came in. Looks like everyone had a grand time.

JimT

Thank you sir .. I cannot take any credit. I went to school. The School of Hard Knocks. I could have been as self-righteous as some others but things happened to me to make me realize I was no better and sometimes not half as good as some of the folks I was talking to. I am still in School by the w...

JimT

BlaineG wrote:Seriously, now.....Wouldn't shooting a firearm in space result in the shooter being propelled backwards?

Hang on to something with one hand, shoot with the other. That's why you use a pistol in space.

I have been propelled backwards by some firearms while still on earth!

JimT

I am quoting here: "Death results from permanent loss of brain function. This can be from direct damage to the brain itself, or from damage to other vital structures, that results in damage to the brain indirectly. We know what those structures are, and where they are. If we can get a bullet to...

JimT

If you haven't read them yet ...

http://www.leverguns.com/articles/taylor/357magnum.htm

http://www.leverguns.com/articles/paco/ ... rature.htm

JimT

http://theanswerorg.wordpress.com/

JimT

It would be fun shooting downward and watching the fireball as it entered the atmosphere. Super Tracers!

JimT

Thanks Joe.

We had a great time.

Game taken:

3 hogs

I Sika Doe

1 Water Buffalo

1 Aoudad

2 Black Hawaiian Rams

1 Spanish Goat

1 Ibex

3 spike elk/red deer cross

Were there any others?

JimT

I shot 410's in my friend's Ttapdoor when we were kids. Worked OK on rabbits if the distance wasn't too far.

JimT

God Bless and Have a GREAT hunt! TAKE PICTURES!!! please ....

JimT

I will have to get all the names ... I didn't do that ahead of time .. sorry.

JimT

Welcome back Jim, So. Mo got hit pretty hard this time, we usually get the messy stuff up here north of the river, but seems like more has been south. One of these days I'd like to meet you, only 4 hrs. down there C'mon down. 'course it's kinda nasty right now. It was 75 degrees in Texas. I woke up...

JimT

I had to leave early .. left Sunday AM ... missed the auction and don't know what happened. I believe that 86r will let us know.

JimT

Where the heck are the moderators? This kind of nonsense is exactly what is changing this forum for the worse. Hunting. Shooting. He deleted the link. Let it go. There should not have been any posts after he deleted it. Why keep things alive? Go out and shoot up some tin cans. You'll feel better.

JimT

http://www.leverguns.com/articles/txhunt2008.htm

Those of you who were there and took photos, email them to me and I will post them.

Please try to keep the size down if you would .. I live in the backwoods and am still on dialup!!

Thanks

JimT

dr walker wrote:480 Achilles?

http://www.leverguns.com/480/Default.htm

480 Achilles on Javelina
http://www.leverguns.com/articles/taylo ... a_2005.htm

JimT

Made it back to Missouri this evening. Left Texas and 75 degrees .. came home to ice and snow - 20 degrees. The roads were clear and we made good time. Fungus Sam and I attended the Leverguns Hog Hunt. Fungas Sam shot a pig the first night with his Browning Model 1895 in .30-06. I saw LOTS of game b...

JimT

In the early AM (7 Feb.) ... those of you coming down for the hunt .. be safe on the roads, in the skies, where ever. See you there. Not sure I will have internet access but will try to post something about the hunt. Once we do the Leverguns Hunt, Fungus Sam and I are heading up north of Abilene for...

JimT

We have had bullets come back hard enough to cut people from near 100 yards. If you used steel it would have to be steeply angled to deflect the bullets into the ground. That deflection reduces the cross-section you see by quite a bit, so it would have to be about twice the height you are figuring o...

JimT

Range and accuracy of both the .44 and the 357 are limited by the nut on the stock.

As to lever shotguns .. they are out there ... Marlin and Winchester leveractions in 410 ... modern-made reproductions of the old Winchester 1887 ...

JimT

LEARNING TO HIT THE TARGET

http://theanswerorg.wordpress.com/

JimT

Joe - and everyone else who reads this -

I am not intelligent enough nor learned enough in the subject to advise anyone as to how they should vote.

I do suggest that everyone spend quite a bit of time on their knees asking for Divine help for this Nation of ours.

JimT

Now, Sir, why do you wish to take action that will hand America over to Socialists as opposed to a bad Republician? Just imaine the two SCOTUS replacements if Gore or Kerry had done the picking as opposed to Bush? Repent and Thin (the vote) No More :wink: I sorta had my tonque in my cheek on that ....

JimT

Good post as always Jim. You have to admire a man that stands by his convictions weather or not you agree. A "Conviction" is something that a person will not change, no matter the circumstances, the pressure, or the consequences. A "Preference" is something that one prefers, wil...

JimT

You spelled that wrong.

Don't you mean "Supper Bowl"?

What we eat chili out of?

JimT

http://theanswerorg.wordpress.com/

JimT

Jim - I couldn't agree more. McCain is no friend of the Second Amendment - or any other Amendment - or the Constitution as a whole. However, since we will elect a President this November - and it will be either the Dem (Hillary or Obama) or the GOP candidate (looking like McCain), Too much at stake...

JimT

Ysabel Kid - I would disagree with you about McCain. He is no better than Clinton or of the other anti-gunners. A sampler (I am sure you are aware of this from your affiliation with the pro-gun groups) Sen McCain voted for an amendment offered by the anti-gun Sen. Charles Schumer of New York that wo...

JimT

Announced today

LCP - Lightweight Compact Pistol

NRA Mini-14 with 20 round magazines

http://www.ruger-firearms.com/Firearms/ ... tInfo.html

JimT

Congratulations.. you are on your way to becoming an old fanny burp. Let me explain: Prices going up are the way of the world. When I was a teenager gasoline cost 19 cents a gallon. My dad would take us to the local hamburger joint on Friday nights. Hamburgers were 10 cents. If you bought 10 you go...

JimT

She's one of the "hotties for Ron Paul" ... http://www.girlinshortshorts.blogspot.c ... endar.html

I don't agree with her worldview but she is easy on the eyes.

JimT

SmokeEater2 wrote:Does anyone know what year Colt started building SAA's with the bushing in the cylinder?

1873

JimT

No thanks to the Republican and the Democrats. I'll take the Libertarian Ladies over them all.

JimT

This is America. Anything is Possible.

JimT

Good enough Joe. I never meant to imply we should all run out and buy one.

But I do want to support and encourage them. Too many of our manufacturing companies have either gone overseas or disappeared altogether.

JimT

how's the packing going for your trip? I see that you're already there! :D I am not sure where he wrote about it ... but you can call him easily enough ... toll free ... 1.800.833.4432 -- tell him I sent you 8) I am there .. at least mentally. Everything is coming together in spite of me working on...

JimT

The key locks as found on Rugers, S&Ws, Taurus and other brands of guns are not safeties, they are function prevention devices . Joe I reject your reality and substitue my own :lol: While your assesment is correct, the reality is, they are called "safeties". Since they are called that...

JimT

Bob Baker can be trusted to speak honestly about his experiences. I have spent time with him and count him as a friend and I trust his word. olgerboy is correct also, but let me add, shoot enough and you will wear the gun out. Most of the time folks don't shoot enough to do that. A .22 sixgun will e...

JimT

Using a Firearm Safety Rules Know your target and what is beyond. Be absolutely sure you have identified your target beyond any doubt. Equally important, be aware of the area beyond your target. This means observing your prospective area of fire before you shoot. Never fire in a direction in which t...

JimT

Ruger has an internal safety on the their single actions. I am not sure about the DA guns .. haven't owned one. TC has an "automatic hammer block safety" I am NOT saying you have to LIKE the safeties. I am saying they are a fact of life Those of us who appreciate firearms need to support t...

JimT

ooop! Didn't see the post below when I posted this .. sorry guys ... Here's more on the Mossberg ... http://www.levergunscommunity.com/viewtopic.php?t=3168&start=0 Remember boys, this is an old company. They have been building guns for a long time. I'd guess they may have bought up some tooling ...

JimT

now c'mon guys. You are not going to have any modern American-made guns without some sort of safety. Fact of life. Don't run them down. Support them. Unless you want all your guns to come from overseas. Besides .. that sort of thing just creates job opportunities for people like Nate Kiowa Jones. My...

JimT

http://www.mossberg.com/images/dcatalog ... rGuide.pdf

Search found 5522 matches

It Ain't Rocket Science

Leverguns Hog Hunt 2008 Photos

Call off the Search Teams - We are home!!

HEADING FOR TEXAS

WARNING - DANGER - RELIGIOUS CONTENT

Re: I Miss Gus Hall

I Miss Gus Hall

New From Ruger

Re: OT-Colt SAA question

and it's MADE IN AMERICA!!