Paco Kelly's Leverguns.com

two bit okie

When I restocke my rossi, I got a little carried away and now have some gaps, other ahh s**t that needs to be tightened up. My quetion is, I have have heard the JB weld can be used instead of ordering glass bedding stuff. Is this true and has anyone used and what were the results.

two bit okie

Does any one know if a marlin stock will fit the rossi Rio Grand 45-70. I am saving my money for one and if the stock is as fugly as the one on my mod 92, I will be replacing it. If the marlin fits, I hav eseveral alternatives.

two bit okie

Interesting, several online places have it listed for $441.oo. and it has a security system built in that requires a key to unlock the rifle. the security system is no where as intrusive as that stupid cross bolt on older winchester equipped models and the one on the marlins. Also the Rossi catalog ...

two bit okie

Yep, after we talked I did just that, and it was still loose, so I whickered off a small piece of coke can put in. even had to lightly tap top of sight to "persuade" it to go in. now is just nice and tight. Will be going to range next week to try ilt out.

two bit okie

Just finished installing nate kiowa jones bolt sight on my rossi mod 92 trapper. My tolorances required a small strip of coke can to fill the slop. Pic and range report next week after going tothe range. Install was a snap, drift out a small pin, lift out the old safty, (again, here I had to insert ...

two bit okie

I was wondering if we have any members in New Zealand. If yes, what is the status of the container ship thatl went aground???

two bit okie

lee dies, and cast bullets exclusivlly.......mostly.........only, yah only

two bit okie

As much as I love Wayne movies, he was not the actor of a wide range of emotion.That said, the Searchers was not only his best work but is also a great classic. When he looked at the captured white women that grabbed the doll, there was an almost pschcotic hatred on his face. and in just about every...

two bit okie

Welcome to the fold. If you want to know about leverguns, you have reached the right place. I have a rossi, snubbed the 20 inch to a 16 inch barrel, I hade a marlin, the front sight stripped and fell of under 500 rounds, had to have it redrlilled out and retapped. Had a winchester, ok but nots real ...

two bit okie

OK, my two bits, I had 4 vaqueros in 44mag. but no " little guns". At my local gun merchant they got in a mod 27 smith and I jumped on it. but I kept all four vaqueros. Not being a collector I have no use for safe full of pistols or rifles or shotguns. (especially as I dont have the money ...

two bit okie

body Just finished accounting for 500 rd 7mm remmag. 500 blem bullets, 62.50 400 mag primers 13.48 I had a couple of hundred 300 new cases @44.00 144.00 per c ammortized over 5 loads 28.oo 3.7pounds powder at 28.00 per # needed 4 pounds, 112.00, 59.3 grs per pound of 7000 grs. .112 rds per # of powd...

two bit okie

Ok, Marlin has problems. dont we all. but I would be interested in a 444 with a full length mag tube and a straight stock. I dont like the half mag and pistol grip. (call me dumb if you like.) I would like to send an E-mail to Remlin and see if such a beast is contemplated. Buuuut, How can I reach t...

two bit okie

Good Morning,

I am building a tactical lever gun out of a rossi mod 92 in 44 mag. I can find just about all parts except a picitinny rail that will fit the dovetail on the Rossi. The scope is going to be one of the holographic sights so I dont need a big rail.

Any help will appreciated.

two bit okie

My 16"rossi is a 44 mag, which I usually have loaded with mouse phart loads, and in the bag a box of 320 gr bear loads. I cast 200 gr and 240 and 250 and the afore mentioned 320. gun is light, handy, and shoots straight enough for close quarters defense against two or four legged predators.

two bit okie

Probably the wrong title, but My 30-30 is not handling the cast bullets the way I like. soooooo I want to swage the bore, ya know drive a lead slug down the bore so that I can measure what the real bore diameter reallly is.

what do I need and how is it done. any help appreciated.

two bit okie

My son has a Marlin Camp Carbine in 45, he tells me that the lower end is plastic. He is looking in to having a lower end made by a machine shop out of aluminum. He is interested in finding out if any other camp carbine owners would be interested in a possible group buy. this an interst only questio...

two bit okie

mine is in 44 mag. I did get new wood for it, mine shoots from 200 gr to 320 cast without a hiccup. mine does have by the way the bolt safety. fine little rifle that is going to get the "tactical levergun" treatment.

two bit okie

The Big 5 sporting goods in the west usually has a center fire rifle in it's weekly ad. A month ago I picked up a savage 111 in 7 mag. with a 3x9 bushnell. Brand new in box $399.99. The reason for a 7 over an 06 is that I have and M-1 to feed and would not want to feed the old war horse somedthing t...

two bit okie

while my lever guns will never be 1 mile sniper rifles, if a dedicated target shooter took a modern lever gun, Marlin, Winchester, what ever and removed the mag tube and went single shot. does anyone have any idea of the actual accuracy possible with a lever gun.

two bit okie

Does any one know where the frogs used on military slings might be purchased. I want to make a custom strap and use these for attachments.

frogs, the brass goodies on a military strap. God only knows how they got that name.

two bit okie

has anyone had the chance to hold and shoot the new marlin-rmingtons? or even heard any reports?

two bit okie

what would be nice would be for a qualified mechanic (artist) to make a lever that is 1/2"deeper and 1" longer. probably sell a bunch of them. Or maybe just an add on that a local gunsmith could cut and insert on existing levers.

two bit okie

I had one for my rossi 44 mag, what a waste of time and money. slowed down action time. I would not waste my time or my money again on such a thing. IMHO

two bit okie

I got my rossi 3 yrs ago, and the wood was dry and uglyl (major ugly) (maybe even general ugy). Any way I found a place online and was able to get a second (a couple of checks and small holes in the stock (nice walnut by the way) and a good forend for $68.00 for both. suggust you check the net for t...

two bit okie

try to shoot one of the darn things accurately. Take a straight stock trapper, and just try to one hand the thing.

Naaahhhhhh, nothing that I have any interest in.

two bit okie

black rifle, a Savage 111 in 7 mm mag. have not shot it yet, had to load some ammo for it.

two bit okie

20"rossi carbine cut back to 16+. neat and handy,

two bit okie

I just sent my money for a 165 plainbase (a wide varity of bases is available), and I will,hopefully, be casting in Feb. Will be reporting when I have something to report.

two bit okie

-------------------------------------------------------------------------------- I was just watching a bunch of you tubers making tactical 870 shotguns and shooting them. I did not know whether to laugh or cry. I love my 870. I have a short barrel, and no plug in the tube. If the bad guys are coming...

two bit okie

I was an ogre I guess, but my kids had to earn their first guns. Earn in school. Honor roll earn. They could shoot any of the them, but to get them, show me the grades. First of all was my 03 springfield with the nice wood. Ex wife was not a gun person but we were at the dinner table and youngest sa...

two bit okie

Boge, works great on northerwestern Arizona dsl line.

two bit okie

Which is a better way to make 38-55 cases? fire form 30-30 or use a expander plug?

two bit okie

I just looked at tedh's winchester that he brought back to life. I am going to do a project mod 94 and expect the need to disassemble the rifle. I have read that the mod 94 is such a complex iron that it is recommended that it go to a gunsmith. I can do ruger single actions, colt 1911, marlins, ross...

two bit okie

I have a possibility of needing to sell an item to a member in Austrailia. He uses paypal, and to my embarrasment, I have no idea how it would work. can some one shine the light for me. please.

two bit okie

I am a big fan of the 44 mag. but when I got started the 45 was a low pressure load with not widespread loading up exposure. If I buy a new 6 gun, it will probably get another 44. Which is why I will offer that if you already have a 45 and the goodies to load for it, go with a ruger Black hawk and h...

two bit okie

hagler, I paid 85$. make me an offer I cannot resist.

two bit okie

Some of you may remember when I put the large loop on my rossi 44 trapper.

Well, I just took it back off. too unwieldy for rapid fire, and I dont spin my rifles.

two bit okie

From a old, fat dinosaur, there are some rifles that just dont look right with a scope. M-1 carbine, Sharps, and at the top of that list is a mod 94. Marlins are ok with glass. but not a 94.

JMHO, which with a doller will get you a cup of joe at burger king.

two bit okie

where do you find these things?????????????????

two bit okie

I want a long barreled 38-55 mod 94. I dont realy like the looks of the marlins. call me a dinosoaur. The plan is get a 26" barrel and full length mag tube put them on a good solid donor action, new wood and refinish. The BIG question is metal refinish. I have read some reports that a mod 94 in...

two bit okie

while I agree, when the cops cant or wont respond, what will happen when you defend yourself? YOU will be accused of being a vigilante. especially in Oakland and Massachisetts. Catch 22.

two bit okie

Ya know, my politics are to the right of Attila the hun, on a different forum are a couple of real bush hating lefties. We had many a racous discussion before Clinton came in. Now I would really like to meet this guy and have brew with him. Will I turn him into another me, no, and I seriously doubt ...

two bit okie

I restocked my Rossi, and the forend for a win mod 92 is a direct fit. check with the various parts places, Numrich arms for instance.

Also, I have one but it is for a 44 mag and too large for your 357.

good luck

two bit okie

one aspect of this question not mentioned is some of us have large hands. all four of my vaquero 44's have dragoon grips because the XR-3 grip frame is too small for my hands. If I have to add the weight of the steel grip frame, I may as well have the bigger gun. Also I am a dinosaur and dont like l...

two bit okie

gallons available from BROWNELLS for $66.95 a gallon.

two bit okie

For those who know such things, is a 38-55 just a 30-30 necked up to 35, or a whole different cartridge. If a different cartridge totally, is there a 30-30 necked up to 35 that already exists? As a cartridge that a mod 94 could be rebarreled to with no other changes than the barrel?? also, can 38-55...

two bit okie

does anyone know if winchester ever made a model 94 with a 24 or 26" round barrel, in 30-30. wheather or not, has anyone ever put a 24 or 26" round barrel on a regular 20" carbine. I have a 20 inch and would have to get a second to convert.

two bit okie

I have just got my bullets ready and inventoried the powder. boolet weight 144 gr and 142 gr plainbase flat point powders available 4895, 4350, 3031 cci large rifle cases new unfired winchester. Any suggestions before I go buy more powder. and if I have to get new, which powder is best for cast 144 ...

two bit okie

Barrel says winchester, new haven, conn. mayhaps wood is Brazilian hardwood of some sort

two bit okie

this is a pic of my 1969 mod 94.

It doesnt look like any walnut that I have ever seen. and I cannot id the wood.

Any help appreciated

Search found 205 matches