Search found 3138 matches
- Mon Jun 24, 2013 2:49 am
- Forum: General Discussion
- Topic: Lee hand loader?
- Replies: 32
- Views: 2868
Re: Lee hand loader?
I like the Lee Hand Press, it was the first thing I bought (I wanted to understand the process better before choosing a press). Someday it will be my only press, when I no longer have the space for a full setup. One thing I have been thinking about, but haven't done yet; if you mount it on the wall ...
- Sun Jun 23, 2013 11:13 am
- Forum: General Discussion
- Topic: Wasted 4 hours trying to mount a Marbles tang sight
- Replies: 20
- Views: 1679
Re: Wasted 4 hours trying to mount a Marbles tang sight
I got a bunch of taps from Midway after the last gunsmith debacle, so at least I'll be prepared.
- Sun Jun 23, 2013 2:36 am
- Forum: General Discussion
- Topic: How can I see leading?
- Replies: 7
- Views: 866
Re: How can I see leading?
I only worry when I see flakes on the cleaning patch.
- Sun Jun 23, 2013 2:34 am
- Forum: General Discussion
- Topic: 357 Mag lever and cast bullets
- Replies: 12
- Views: 1298
Re: 357 Mag lever and cast bullets
Mine are more accurate than 30-30.
- Sun Jun 23, 2013 2:31 am
- Forum: General Discussion
- Topic: Slot Blank Won't go In
- Replies: 19
- Views: 1124
Re: Slot Blank Won't go In
I have one that won't stay in.
Wanna swap?
I'm totally serious. Maybe they will both be a perfect fit.
Wanna swap?
I'm totally serious. Maybe they will both be a perfect fit.
- Sat Jun 22, 2013 10:52 am
- Forum: General Discussion
- Topic: I have scoped my leveraction!
- Replies: 54
- Views: 3690
Re: I have scoped my leveraction!
ASSASSINO!
- Sat Jun 22, 2013 3:20 am
- Forum: General Discussion
- Topic: Randall Knives, are they worth the cost?
- Replies: 49
- Views: 7935
Re: Randall Knives, are they worth the cost?
The cost goes away, and the knife is yours. For me, no, the job can be done with another knife. I like my K-bar hunting knives with leather wrapped handles, $25-35.00. BUT if I were really into knives, if it was my "thing", and my identity was wrapped up in it, it would not be too much. If...
- Sat Jun 22, 2013 3:09 am
- Forum: General Discussion
- Topic: I don't believe this would really blow up...
- Replies: 36
- Views: 3332
Re: I don't believe this would really blow up...
John, are you saying a revolver can only take 15,000 psi? Ok, what is that in copper units, 16,000? It seems to me that factory ammo, ok for either rifles of handguns, would be in the 30,000 range, maybe 40,000. I have a hard time even finding a load in a book that's under 20,000. Am I missing somet...
- Fri Jun 21, 2013 3:14 am
- Forum: General Discussion
- Topic: I don't believe this would really blow up...
- Replies: 36
- Views: 3332
Re: I don't believe this would really blow up...
if you want to talk detonation, how about the guy who didn't know how to read his scale, and loaded 38 special cases with 30 grains of Bullseye (compressed) instead of 3.0 grains? --------------------------------------------------------------------- I'm reading up on this on the Internet, and some a...
- Fri Jun 21, 2013 3:08 am
- Forum: General Discussion
- Topic: Earned myself a levergun
- Replies: 7
- Views: 1155
Earned myself a levergun
Well, I'm ecstatic; I have been meaning to get out of the stock market for the year, so I did - on Tuesday. Now stocks are plunging and for once I'm not getting hurt. Earned myself a nice levergun in two days!
- Fri Jun 21, 2013 2:54 am
- Forum: General Discussion
- Topic: Are There Any REAL Gunsmiths Left?
- Replies: 11
- Views: 1530
Re: Are There Any REAL Gunsmiths Left?
If U can take the Lever out surely U can replace the cartridge stop or repair as neccessary. Just My 2 cents, didn't cost nobody nuthin but could save some money. Perry I agree with Perry, just order the part and replace it, I think it's $15.00. I've had mine out and worked on it, if yours is worn ...
- Wed Jun 19, 2013 3:34 am
- Forum: General Discussion
- Topic: In remembrance of Edmund Fitzgerald .
- Replies: 98
- Views: 5555
Re: In remembrance of Edmund Fitzgerald .
was a bone to be chewed...
- Wed Jun 19, 2013 3:07 am
- Forum: General Discussion
- Topic: I don't believe this would really blow up...
- Replies: 36
- Views: 3332
Re: I don't believe this would really blow up...
Any powder that fails to fill the case properly runs the risk of positional-powder-high-pressure.......Remote possibility that that is..... I have read and heard that that's BS. Tell me how 2.5 grains of Bullseye fills the case? The Lee Manual will tell you that loads leaving more space in the case...
- Wed Jun 19, 2013 2:59 am
- Forum: General Discussion
- Topic: Please Have A Thought About My Drinking....
- Replies: 108
- Views: 7229
Re: Please Have A Thought About My Drinking....
I wouldn't worry about it too much; sometimes things can just get away from you. The last time I got drunk was about six years ago, I was at home, watching Gettysburg on the 4th of July weekend. It was a nice night, screen doors were open, I was playing along with the soundtrack, and swilling beers....
- Tue Jun 18, 2013 11:52 am
- Forum: General Discussion
- Topic: Has the price bubble burst?
- Replies: 22
- Views: 2675
Re: Has the price bubble burst?
a friend bought primers yesterday for $37.73 with discount.
- Mon Jun 17, 2013 2:02 pm
- Forum: General Discussion
- Topic: FYI on MidwayUSA orders.
- Replies: 12
- Views: 1908
Re: FYI on MidwayUSA orders.
I had a recent experience with Midway, which worked out in my favor. I ordered a scope and rings, the scope was "free shipping", and the rings went along in the box without a shipping charge. I didn't like the color match and returned the scope, and they didn't have a suitable replacement....
- Sat Jun 15, 2013 7:27 pm
- Forum: General Discussion
- Topic: Win94+cast=vel?
- Replies: 26
- Views: 1733
Re: Win94+cast=vel?
paper patching seems like a nice idea, but it sounds pretty labor intensive.
- Sat Jun 15, 2013 7:16 pm
- Forum: General Discussion
- Topic: Went for a stroll, seen deer.
- Replies: 19
- Views: 1707
Re: Went for a stroll, seen deer.
do those melatonin deer sleep a lot? great pics. Once I told my mom I spotted a fawn and she said, "Don't be silly, dear, they come that way". ----------------------------------------------------------- Pitchy, you'll never get it off the ground: http://img.photobucket.com/albums/v629/InTh...
- Fri Jun 14, 2013 1:25 pm
- Forum: General Discussion
- Topic: Win94+cast=vel?
- Replies: 26
- Views: 1733
Re: Win94+cast=vel?
Paco had an article with something interesting. I think it was a 30-30 trick. You want hard cast for your barrel and soft cast for game. So you cast your own bullets, and when they are hot you quench them in cold water. This hardens them. But, you quench only the base, and you don't quench the tips....
- Fri Jun 14, 2013 5:06 am
- Forum: General Discussion
- Topic: Got me a dang Hobie gun
- Replies: 28
- Views: 2027
Re: Got me a dang Hobie gun
Not a Hobie gun without an FP.
- Thu Jun 13, 2013 2:02 pm
- Forum: General Discussion
- Topic: Win94+cast=vel?
- Replies: 26
- Views: 1733
Re: Win94+cast=vel?
deform how? Do you mean deforming the base to seal the bore at the moment of ignition? Or do you mean expanding in game? The first issue is why you can get leading with hard cast that is pushed too slow. That's what I got with Lasercast and 10 gr 2400. I increased it to a max load of 13 gr 4227 (whi...
- Thu Jun 13, 2013 4:59 am
- Forum: General Discussion
- Topic: 45-70 Cowboy Dies...
- Replies: 8
- Views: 1871
Re: 45-70 Cowboy Dies...
and I thought this was another for the tribute forum
- Thu Jun 13, 2013 4:55 am
- Forum: General Discussion
- Topic: Win94+cast=vel?
- Replies: 26
- Views: 1733
Re: Win94+cast=vel?
I use Lasercast 180's in that same rifle, and no leading. The max load gives you about 1300 fps I think. The Lasercast is hard lead; if you push them too slow they DO lead the bore. About the paper gas checks, couldn't hurt. I've been thinking about trying flame-retardant paint, just paint on gas ch...
- Tue Jun 11, 2013 12:18 pm
- Forum: General Discussion
- Topic: Mileage Calculator
- Replies: 15
- Views: 667
Re: Mileage Calculator
The distance from Fort Wayne, Indiana to Paris, Kentucky is approximately 203.6 miles (327.7 km).
Joe, I guess for you it ought to have a spell-checker built right in with it.
Joe, I guess for you it ought to have a spell-checker built right in with it.
- Tue Jun 11, 2013 4:32 am
- Forum: General Discussion
- Topic: Mileage Calculator
- Replies: 15
- Views: 667
Mileage Calculator
I thought somebody on the internet ought to have the mileage between cities, well, they do: http://www.symsys.com/mileage/index.php Handy and cool, might be nice for planning hunting trips, too. I'll have to see how small a city has to be before it's not listed. Here's one I tried: The distance from...
- Sat Jun 08, 2013 7:46 pm
- Forum: General Discussion
- Topic: Hunting and shooting in Indiana and Ohio
- Replies: 6
- Views: 966
Hunting and shooting in Indiana and Ohio
Well, I may go back home to be closer to family. They're all in Cincinnati, but Indiana would be close enough, and might have more employment opportunities for me. About the latter, Evansville seemed to have a lot of places I could work, Indianapolis also. Northern Kentucky is also a possibility. I'...
- Sat Jun 08, 2013 3:02 pm
- Forum: General Discussion
- Topic: Audiophiles.....
- Replies: 7
- Views: 556
Re: Audiophiles.....
there's a lot going on for the hunter at the moment of the shot, they may just miss the noise while concentrating on other things. I have a little ringing on one side, because I fired when I was in a stone canyon. Even though I was "outside", I might as well have been in a small room as fa...
- Fri Jun 07, 2013 5:12 am
- Forum: General Discussion
- Topic: Ammo Shortage?
- Replies: 33
- Views: 3650
Re: Ammo Shortage?
you might have to go all the way to Threeson.olyinaz wrote:It hasn't let up in Tucson.
- Fri Jun 07, 2013 5:10 am
- Forum: General Discussion
- Topic: Cowboy Dies Causing Problem
- Replies: 30
- Views: 3521
Re: Cowboy Dies Causing Problem
My first thought also - I guess we think alike.BlaineG wrote:I first thought of probate problems.....Who gets the horse....Cowboy Dies Causing Problem
Never been so frightened in my life.
- Thu Jun 06, 2013 4:48 am
- Forum: General Discussion
- Topic: Ammo Shortage?
- Replies: 33
- Views: 3650
Re: Ammo Shortage?
Really? :P http://s35.photobucket.com/albums/d197/sass93/IMAG0092.jpg Earlier today @ Academy Sports, Joplin, MO! It may take awhile for the trucks to arrive in your town, but... NOW WHERE ARE ALL THE COMPONENTS! :P :P :twisted: :o This can't be a real pic - that customer is allowed to walk right u...
- Thu Jun 06, 2013 4:43 am
- Forum: General Discussion
- Topic: New Law Effects Hotels that Restrict Firearms TX
- Replies: 28
- Views: 2954
Re: New Law Effects Hotels that Restrict Firearms TX
Wow! When 86er says "jump", the Texas Legislature says "how high?" Congratulations.
- Wed Jun 05, 2013 3:02 am
- Forum: General Discussion
- Topic: scope power
- Replies: 13
- Views: 1790
Re: scope power
if I were you I'd get one with an adjustable objective so you can focus on something other than 100 yards away. Recently I was offered my friend's Contender with a scope racked up to 9x and at 200m the rams were blurry. If zooming up the power, it will be nice be able to focus in sharply, and it wil...
- Sat Jun 01, 2013 10:26 am
- Forum: General Discussion
- Topic: 357magnum frustration!
- Replies: 26
- Views: 2043
Re: 357magnum frustration!
Those loads sound a little hot for best accuracy. I got very good accuracy in the same rifle with 10 grains of 2400.
I switched to IMR 4227. With 158's, 12.5 grains is the most accurate. My best loads are well under the max. I figure, if I need velocity, use a rifle cartridge.
I switched to IMR 4227. With 158's, 12.5 grains is the most accurate. My best loads are well under the max. I figure, if I need velocity, use a rifle cartridge.
- Sat Jun 01, 2013 3:19 am
- Forum: General Discussion
- Topic: Contacting the Rifling
- Replies: 5
- Views: 1060
Re: Contacting the Rifling
Well, the bullets in question are jacketed, they are the 35 Rem 200 grain jacketed, with the long blunt nose. Still it sounds like I'm ok, as I'm about 3 grains under the max, that's almost ten percent. If the extra space in the case is considered, there's even more room to play with. Also consider ...
- Fri May 31, 2013 12:55 pm
- Forum: General Discussion
- Topic: I heard the Gander MT. has just opened a guns only store in.
- Replies: 14
- Views: 1644
Re: I heard the Gander MT. has just opened a guns only store
I'd take a gander at it
- Fri May 31, 2013 4:13 am
- Forum: General Discussion
- Topic: Contacting the Rifling
- Replies: 5
- Views: 1060
Contacting the Rifling
35 Rem loads have always worked pretty well for me, Remington factory and my own with Sierra bullets were accurate. I tried the Hornady bullets and noticed they sit farther forward than the Sierras if I crimp to the mark. This increases the overall length, leaving more room in the case and also the ...
- Fri May 31, 2013 3:49 am
- Forum: General Discussion
- Topic: Lever's and Cast Bullets
- Replies: 19
- Views: 1177
Re: Lever's and Cast Bullets
sure, if you can count on your target to be 150 yards or closer; those bolt guns ventilate targets at 300-400 yards.
- Fri May 31, 2013 3:43 am
- Forum: General Discussion
- Topic: gonna scope a 94
- Replies: 43
- Views: 4298
Re: gonna scope a 94
See better - shoot better. I shoot about the same sized groups with scope or iron sights, BUT that assumes optimum conditions. Scopes are better for low light and that's what I use them for. I was offered a friend's rifle to shoot a few, and he had a scope set to 9x and the target range 200 meters....
- Thu May 30, 2013 3:29 am
- Forum: General Discussion
- Topic: Which 38-55
- Replies: 13
- Views: 3212
Re: Which 38-55
Funny but I've never thought of a 38-55 as having a long barrel. Seems like it should be a carbine length thing.
- Mon May 27, 2013 2:45 pm
- Forum: General Discussion
- Topic: Issues with forum loading
- Replies: 33
- Views: 1298
Re: Issues with forum loading
Old Savage wrote:I think Grizz may be our man on this ... and here I was thinking bad trunion bearings
It might be that Leverguns is just more stubborn than other sites; it takes making an effort to get through sometimes.
- Mon May 27, 2013 2:20 pm
- Forum: General Discussion
- Topic: Issues with forum loading
- Replies: 33
- Views: 1298
Re: Issues with forum loading
I have noticed it for a long time, but with individual posts, not the whole forum.
- Sun May 26, 2013 10:50 pm
- Forum: General Discussion
- Topic: Single Action Revolvers
- Replies: 13
- Views: 2240
Re: Single Action Revolvers
Here Lies Lester Blevin
Six Shots with a .357
Hope Les is
Now in Heaven
Six Shots with a .357
Hope Les is
Now in Heaven
- Sat May 25, 2013 9:55 pm
- Forum: General Discussion
- Topic: The Brightness Of Leupold Spotting Scope
- Replies: 5
- Views: 448
Re: The Brightness Of Leupold Spotting Scope
shooting with a camera, it adjusts the exposure, so whatever scope you have it will create the same brightness for the pic. It can also make moonlight look like high noon. You can also take this pic and make it as bright as you want with software. If you shoot two pictures with the same exposure set...
- Sat May 25, 2013 3:22 am
- Forum: General Discussion
- Topic: Spotting ‘scopes: soon obsolete?
- Replies: 13
- Views: 1618
Re: Spotting ‘scopes: soon obsolete?
First, I want to re-iterate that I had this idea a long time ago, and although I have had no contact with the inventors, the idea is completely and entirely mine. That being said, small handy spotting scopes that fit in a sock will never be obsolete - the demise of good optics, film cameras, monocul...
- Thu May 23, 2013 4:25 am
- Forum: General Discussion
- Topic: Poly Ivory ???
- Replies: 9
- Views: 489
Re: Poly Ivory ???
Yes, you can. Try an inconspicuous spot first, though. "Synthetic" ivory varies considerably in composition, some is more "chippy" and fragile, some is softer, some harder, and so forth. As has been alluded to, some melts more readily. Most of the stuff I've used takes a nice po...
- Wed May 22, 2013 3:15 am
- Forum: General Discussion
- Topic: Need some ideas to get rid of MOLES...
- Replies: 28
- Views: 2432
Re: Need some ideas to get rid of MOLES...
Have you consulted your dermatologist? Seriously, I would try smoke - it would expose any other holes, and suffocate them. Water would just soak in to the earth and create larger tunnels and mud. You'd have to come up with a way to make smoke and pump it in there though. You know what might be inter...
- Mon May 20, 2013 2:06 pm
- Forum: General Discussion
- Topic: Dust free shop?
- Replies: 15
- Views: 1899
Re: Dust free shop?
Thanks, that's a good idea. I have problems with dust at work and have been coughing a lot, even at home. It could be that whatever dust I have in my carpet is exacerbating the condition; this might be worth a try.
- Sat May 18, 2013 3:19 am
- Forum: General Discussion
- Topic: ranch hand humor!
- Replies: 7
- Views: 667
Re: ranch hand humor!
A man came home to find his wife with her suitcase on the bed, she was folding clothes and packing. "Where do you think you're going?" he asked. "I'm going to Las Vegas, Nevada," she replied, "because I heard that when you have sex with a man there, he gives you $1,000.00.&q...
- Sat May 18, 2013 3:11 am
- Forum: General Discussion
- Topic: Ideas for a scope on my '94 AE.......
- Replies: 27
- Views: 2252
Re: Ideas for a scope on my '94 AE.......
by the way, Joe makes and sells scope covers, several forum members have them.
- Fri May 17, 2013 3:30 am
- Forum: General Discussion
- Topic: For the B25 Mitchell fans...
- Replies: 7
- Views: 1206
Re: For the B25 Mitchell fans...
I heard there's a B-25 out here at the Van Nuys airport, though I've never seen it. I'll have to try. The cannon version must have been something. As an aside, about 12 years ago I was driving from San Diego to Palm Springs, and way out in the middle of nowhere is a hanger with a B-29 parked out in ...