Take a tap that wil just thread into the case and turn it in to the brass. Tap out with a rod. Done.

If you brought that gun to me and wanted it rechambered I'd whack you with a ball peen hammer! No, #1 the gun was not designed or warranted for those pressures and eventually the gun would develope excess headspace. #2 the gun is just too nice as it is to even think of ruining it's value. If you wan...

I've stalked Buffalo (American Bison) on the ground dressed in buckskin and carrying a B/P Sharps. I've shot them with everything from a 30-30 to a 60 cal trade gun and I still hesitate to call it a HUNT. Buuffalo can jump like crazy, they can be mean and stomp and gore you but so can a long horn or...

Not only can the 94 do it all but one 94 the 30-30 can do 99% of it! If you reload and especially if you reload with cast bullets, the 30-30 is good for mouse to moose. Add a supplemental chamber and you can shoot 32 ACP, 32 S and W 32 S and W Long, 32 H and R or 30 Carbine. With cast bullets you ca...

I slammed mine in the car door and it shortended right up.

I once asked Doc Carlson about carrying his engraved SAA. He told me , "well at least the scratches don't show". If you want to judge the quality of the engraving i would buy a copy of James Meeks book and then give them a close look. It seems to me to be typical Italian engraving and at c...

They are all good. In 1990 I started buying 1 book a month for my dad. he now has all of the novels in the leather bound books. I went to visit him last week and he has them stacked in the garage. I asked why and he said, "I finished the last one last week, do you know anybody who wants them?&q...

I would be most careful buying anything with Chapparral Arms on it. The qualiity of these guns is highly suspect and they have no idea of what constitutes proper bore diameter. I have had 38-40's with bores up to 403. The parts are mismatched and it seems the guns are intended more for show than go....

With the long neck and generous powder space the 30-40 is also an excellent cast bullet cartridge. It is fairly easy to push a 220 gran cast slug at the original 2100 fps from the 30" tube and velocity from a 24" barrel rifle will run right at 1950. A cast buullett from wheel weighs at 195...

Typical of HHS/Social Services. many time they have started out with,"First we'll grab the kids. then we'll do the investigation". I fight with them on a weekly basis.

Try Michael Bloomberg the NYC sales rep! He's trying to have the company shut down.

They do make a good product and it does a superior job if that's the kinnd of finish you like.

Find a pond crawdads, tie a rope to the antlers and thow it in. Come back a week later and it will be clean.

I do this for a lot of my knife fittings and M/L parts. No problems yet.

Out of 9 Winchester 1886's I've had in the shop 6 needed work to fire a full 50 rounds of factory ammo. That just ain't right. I won't order one for anybody without telling them they will likely need work on the gun and for $1500?

Quite frankly the Winchester tang safety guns don't work! I have documented several of these rifles as having problems firing factory ammo. They have inconsistant ignition and therefore suffer with poor accuracy. The last one I worked on I replaced the Winchester parts with Browning and welded up th...

Shooting lead in a 45 Colt 92 I can push it to 1450 with no leading fairly easily. First i do a chamner cast and then I size the bullet as close as I can to the throat. In this case I size a Lee 250 rnfp to 453. I cast this bullet from 1/2 and 1/2 wheel weight and lino for plinking and high round co...

Picked one up at this price a few weeks ago. The gun is a good shooter with cast and the chamber is tighter than the Puma's. Loads that sooted in the Puma are clean in the CD. I did remover the terrorist block from the mag tube and am now able to load more than 5 shots. The action is as smoooth out ...