Paco Kelly's Leverguns.com

foxtrapper

Yep I have the 6 gun wire rack from Cabelas. Holds my Ruger SA and 1911"s .It works as advertised, the guns are held upside down. It has a soft rubber coating that does not mar the finish. Downside a bit pricey

foxtrapper

Cas Saturday sounds good other than the weather It's supposed to rain

While I got ya did you get my 32 mag cylinder?

foxtrapper

Would it be possible for you to post the picture of the single six you had converted to centerfire? The one I'm interested most is the shot of the"plug" that was installed . Thanks

foxtrapper

Joe how come you don't like the Clyde replacement? Except for the color difference I think it does the job well

. I think its made from aluminum. I had a Marlin re blued with the replacement part installed and it and the steel came out the same color.

foxtrapper

The Garret ammo will not cycle in a lever action it's too long. As said above the twist rate for bullets heavier than 270 grains or so will not stabilize due to the twist rate being to slow.

foxtrapper

One of theirs was gunned down in a ambush last week. This response was do to a gun run. You can't threaten these turds with jail or with losing their possessions the only thing that gets their attention is primal. PAIN

foxtrapper

Heal quickly. Tough break

foxtrapper

Mossberg is the way to in that price range. Congrats on your upcoming nuptials.

foxtrapper

Has anybody dealt with Pale Horse Holster? On their website they state that turnaround time is 8-16 weeks and maybe longer during heavy ordering times. Right now I'm at 7 months :shock: They state that they wont take phone calls asking for due times saying that taking calls would keep them from maki...

foxtrapper

First I'm glad you have your rifle back. It's sad that it didn't come out the way you wanted. You gave the smith instruction ,money and time but he didn't do his part :( Now about ejecting live rounds. I have a 50AK built on a Marlin 1895 that has no problem ejecting live rounds using 525grn cast bu...

foxtrapper

Hey Ray are you talking Floral Park Sewanhaka High?

foxtrapper

Unless your decapping Berdan primers with standard dies you have a problem :( Make sure that the decapping pin extends just enough to push out the primer. Your dies should last forever ,don't waste your money on doubles . Buy a good brass tumbler [vibrator] ,making sure your brass is clean will keep...

foxtrapper

I agree that shooting someones cattle or wild horses should go to jail. But the message I got from some of the posts are that you better have permission from the rancher to be on the BLM land that he leases. Or else. Isn't it up to the authorities to police the land not the rancher. Why should you e...

foxtrapper

Thats how all Long Islanders do it

Something about the cesspools sitting atop the underground aquifers. You know the trickle down theory

foxtrapper

Interesting topic from another forum. I understand that cattlemen are able to lease BLM land for grazing rights for their cattle. What is unclear to me is does their lease agreement give them the right to determine who is able to access the leased property. The rancher on the other forum described h...

foxtrapper

Search engine, I was looking for custom levergun gunsmith and the rest was history!

foxtrapper

I picked one NIB from gunbroker last fall. Paid $620.00 I got such a good deal that I'm 95% certain that I'll rechamber it for the 450/400. Hornady is making the brass and hopefully the dies soon.

foxtrapper

I cut down a 1895 cowboy making the gun very light. It has the straight grip, and with CP 460 gr boolits it will hurt your hand in the lever. I will be sending the lever to Reeder custom guns to have it modified. He does the in between look, not the big loop.

foxtrapper

Someone brought up the wear pattern on the keyboard being a possible liability . My safe uses 6 key strokes and even if you knew the 6 the odds of you getting them in the right order is astronomical . If you could have the ability to get it right your better off playing the lottery then trying to ge...

foxtrapper

I saw it at the movies with my wife in 3-D. Very realistic, sometimes you would swear the figures were real. Not for the kiddies

foxtrapper

A Marlin 1895ss converted to 50AK by Gary Reeder and a Marlin 1895 Cowboy in 45/70 by Dave Clements. Butt cuff by our own Lever. First Photobucket try wish me luck!

foxtrapper

Found this lurking on GA. Just listed as a Marlin 1894

http://www.gunbroker.com/Auction/ViewIt ... m=90578977

foxtrapper

Hobie welcome to the" Dark Side" Go ahead and get one I did last year didn't even fire it yet! Bushmaster A3 the one with the removable carry handle much better setup for optics. Which one to get depends on what you want it for. If your going hardcore taking training classes putting hundre...

foxtrapper

Hope yer feeling better Joe. Good thing it didn't get your eye! When I had my 50AK built the gunsmith wouldn't build it without a muzzle break. A lever with a break ,not my cup of tea but he would not build it any other way. I see his point! Did your family make the move yet? Hope you got the housin...

foxtrapper

Looks good CRS. Glad I was able help out

foxtrapper

Lets see a couple of punks get drunk and taunt the tigers at the zoo. Read some stories here that members did when young and foolish, don,t remember anyone being glad they got hurt. Sure they deserve a boot in the *** but to be mauled to death. They didn't let the tiger out they were yelling ,hasn't...

foxtrapper

Which is the better gun

I'm talking about new models. The Marlin has a rebounding hammer, does the BL-22. This will be my first lever .22 .

foxtrapper

Rusty I have and reload a couple of Superblack hawks and Blackhawks that I do pretty good with

Its not that I'm trying to get a target gun out of a trail gun. Be nice to hit a pop can at twenty yards with a rest

I'll give Ruger a call see what they say. Thanks again guys

foxtrapper

I should have been more clear. I own a single six, bought it new in 1979. I carried it on my hip during the hunting season whether for deer or upland game. Basically for a coupe de graus on a wounded deer and the occasional plinking at rocks and such. Now that I have retired I am taking shooting a l...

foxtrapper

Knowing that the single six may have problems in the accuracy department. Besides a F.A. what would be a good choice for a stock .22?

foxtrapper

CRS I may have a lead on a 1895 Win takedown only fifty rnds through it dies and factory loaded rnds . Let me know quickly Have to act fast!

foxtrapper

How about the NYS Park Police going from a Glock 9mm to a Glock 45GAP. Guess where the 9's went? Destroyed ,thats where!! After all it's only taxpayer money and there is plenty where that came from.

foxtrapper

That was quick

Thank you

foxtrapper

Salvo where did you get the forcing cone tool? If its from Brownells do you have the order number?

foxtrapper

Before the holidays the forum members helped me make a decision about my dog. The fix was removal of both of the dogs eyes. She had been blind for many months prior to surgery but was able to get around the house . She is doing well and began eating and drinking later that night. Thanks again for ev...

foxtrapper

I found this method to work well. Start with a oversize bronze bore brush, wrap the brush with copper scouring pad. The pad must be pure copper, some are steel that are copper coated. You never want to use steel wool in your barrel." Chore Boy" brand that you can get at the supermarket is ...

foxtrapper

Good luck Mike.

foxtrapper

I think I need one

foxtrapper

Dave Clements is offering a new caliber conversion for the Marlin 1895 that requires only a barrel change. Its a .348 calibre necked down 45/70 shortened to 2.0. The dies will be offered by Dave. Also the round will not be required fire formed.

foxtrapper

Would you be willing to sell just the ammo?

foxtrapper

At least its a start

foxtrapper

I would love to trap in your neck of the woods! I trap down here on L.I. trouble is we got no coyotes

Maybe some of your friends could use some help on their line

foxtrapper

I have a Ruger#1 in 405 Win that I would like some help with. I have 325gr Hard cast gas checked bullets that I would like to load with Benchmark powder. Anybody have a starting load for this combo?

Search found 393 matches

Hey CAS ---Picture of your centerfire single six

Speaking of holsters

Hunting in the west question

FS-on Gunbroker

BL-22 vs 39a

OT - Single action .22

OT Succesful glaucoma surgery for my Beagle

Well ,where can I git one!

marlin conversion by Dave Clements

405 ammo

Thanks JJ Miller

loading for the 405 Win