Help jog my memory re: cutting a 336

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Pisgah
Senior Levergunner
Posts: 1799
Joined: Thu Sep 06, 2007 9:01 pm
Location: SC

Help jog my memory re: cutting a 336

Post by Pisgah »

Several months back I read a most interesting post, including photos, of a Marlin 336 or Glenfield 30A that had had the barrel cut to 16 or 18" and the mag tube shortened to a "button mag" configuration. For the life of me I cannot recall if I sa it here or on another forum, but I'd sure appreciate anyone pointing me to it if they know where it is. I have acquired a cheap, rusted, beat-up but sound 30A and am considering a similar job.Thanks!
Top
salvo
Senior Levergunner
Posts: 1509
Joined: Mon Sep 03, 2007 3:56 pm
Location: Vegas
Contact:
Contact salvo

Re: Help jog my memory re: cutting a 336

Post by salvo »

Maybe this one?
http://beartoothbullets.com/tech_notes/ ... tes.htm/58
ScottS

Image

"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
Top
Bruce
Levergunner 3.0
Posts: 536
Joined: Thu Sep 13, 2007 4:31 am
Location: North Florida
Contact:
Contact Bruce

Re: Help jog my memory re: cutting a 336

Post by Bruce »

Marlinowners has a couple of posts about that also.
http://www.pumprifle.org/
Bruce Hamlin's Pump Rifle Forum
Top
Post Reply

Return to “General Discussion”