Lyman 311440
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Lyman 311440
Anyone shooting this bullet?
- AJMD429
- Posting leader...
- Posts: 32132
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Lyman 311440
No, but it looks like it would hit like a freight train...!
Do you know if it will feed through a Marlin...?
Do you know if it will feed through a Marlin...?
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: Lyman 311440
I shot it for awhile in one of the 30-30's I had !
Did well enough !
Did well enough !
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Re: Lyman 311440
This is a new mould to me & haven't fired it yet. I don't have a Marlin but a 94 Winchester. I really see no reason it shouldn't though.AJMD429 wrote:No, but it looks like it would hit like a freight train...!
Do you know if it will feed through a Marlin...?
- J Miller
- Member Emeritus
- Posts: 14884
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: Lyman 311440
Lynn,
Welcome to Leverguns.
What does that bullet weigh? I'm not familiar with it at all, but it looks like something I might wanna try in the future.
Joe
Welcome to Leverguns.
What does that bullet weigh? I'm not familiar with it at all, but it looks like something I might wanna try in the future.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
Re: Lyman 311440
I think Lyman claims it to be 151 grains when poured with Lyman #2 . I only used WW's and never bothered to weigh any .J Miller wrote:Lynn,
Welcome to Leverguns.
What does that bullet weigh? I'm not familiar with it at all, but it looks like something I might wanna try in the future.
Joe
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Re: Lyman 311440
Yes it will .AJMD429 wrote:Do you know if it will feed through a Marlin...?
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
- Sixgun
- Posting leader...
- Posts: 18678
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Lyman 311440
Lynn,
Is that you, from the "hollow"? We "gots" to get together and catch up, you old redneck!---------Sixgun
Is that you, from the "hollow"? We "gots" to get together and catch up, you old redneck!---------Sixgun
Re: Lyman 311440
Lynn,LAH wrote:This is a new mould to me & haven't fired it yet. I don't have a Marlin but a 94 Winchester. I really see no reason it shouldn't though.AJMD429 wrote:No, but it looks like it would hit like a freight train...!
Do you know if it will feed through a Marlin...?
So you haven't used that in that neat little 94 yet? I think you should go kill a deer with it.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
-
- Senior Levergunner
- Posts: 1244
- Joined: Mon Sep 03, 2007 3:15 pm
- Location: West Michigan
- Contact:
Re: Lyman 311440
No...but daddy like.
Let us know how it shoots.
Let us know how it shoots.
-
- Levergunner 1.0
- Posts: 88
- Joined: Mon Dec 17, 2007 2:27 pm
- Location: USA
Re: Lyman 311440
I've been shooting this one in 30 wcf.,30 Rem, 30/40,300 S.,7.65 Arg.and 303 Br. for a decade or more(ever since i read some of Paco's writing on it for the 30/30..Have 3 Lyman moulds for it,and a 6c Lee group buy clone..The lee drops them at .315 with our alloy,and I won't size it down small enough for some 30 wcf's ,but at .312 or .313 it's a fine shooter in my Argies,303 Br. and a Krag or three with "generous " bores.I consider it the ideal cast bullet for the 300 S. Nothing larger than deer taken yet,but have Bull elk permit in Seven Devils country this Oct. and planning "something" with this bullet and a 307 W. custom rifle just acquired..I would buy this mould style ,even if paying one the reliable custom moldmakers for their work...At one time Western Bullet out of Missoula offered these ready to shoot..worth checking out if you are uncertain as to utility for your needa.... Nate
-
- Levergunner 2.0
- Posts: 210
- Joined: Fri Jul 15, 2011 8:18 am
Re: Lyman 311440
Looks like a great deer and hog round.