My first post. Hello all
I have a model 94 big bore in 307 and would like to mount a scope.
The front mount holes are perpendicular to the bore and it seams all the bases have the holes in line with the bore.
The holes appear to be factory done.
Does anyone know of a mount that would work?
Thanks
Big bore scope mount
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Re: Big bore scope mount
http://www.ironsighter.com/p-219-winche ... -bore.aspx
Welcome. Hope this helps. 1886.
Welcome. Hope this helps. 1886.
Re: Big bore scope mount
winchester big bore takes #403 and 95 weaver mounts
Re: Big bore scope mount
+1 - Except that all BB94AE's don't take the same front base.castcat wrote:winchester big bore takes #403 and 95 weaver mounts
The early BB94AE's need the Weaver #403 front base, due to the factory side-to-side scope mount holes (crosswise to the bore) there.
Later BB94AE's have the front receiver ring D/T'd inline with the bore, and take a Weaver #94 front base.
Both early & later BB94AE's all take the same Weaver #95 rear scope mount base that straddles the bolt.
.
Re: Big bore scope mount
You can still get them directly from Browning/Winchester. Give them a call 1-800-322-4626. Ahlmans are a certified repair center and can get them also. http://www.ahlmans.com/
Re: Big bore scope mount
Thanks for the info. Now the hunt begins.