I'm in the market for a Lead Hardness Tester. Which one do U use/recommend ? I have looked at several-actually there aren't that many to choose from. They all seem pretty simple. There are Pros & Cons of using one in the first place. So what say You Levergunners ?
Perry
What hardness tester to buy
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
What hardness tester to buy
Perry in Bangor----++++===Calif
-
- Advanced Levergunner
- Posts: 2054
- Joined: Mon Dec 10, 2007 12:43 pm
- Location: Between No Where & No Place, WA
Re: What hardness tester to buy
I have an older LBT Hardness Tester and find it reliable and easy to use. See:
http://www.lbtmoulds.com/hardtester.shtml
Even though I buy from a dealer with certified lead, I always check my lead for hardness. Just something that I started doing many years ago and have not stopped.
If you are a lead scrounger and have a developed an alloy of a certain and known brinel hardness number (BhN) -- AKA hardness -- that does not lead the bore, you can easily repeat the alloy content by mixing and then measuring the hardness. I know a more than a few cast bullet shooters and often times their leading problems originated from not knowing the hardness of the alloy.
It is one of those reloading tools, much like the dial caliper or a vernier caliper, that make reloading and casting more efficient and accurate on the target.
http://www.lbtmoulds.com/hardtester.shtml
Even though I buy from a dealer with certified lead, I always check my lead for hardness. Just something that I started doing many years ago and have not stopped.
If you are a lead scrounger and have a developed an alloy of a certain and known brinel hardness number (BhN) -- AKA hardness -- that does not lead the bore, you can easily repeat the alloy content by mixing and then measuring the hardness. I know a more than a few cast bullet shooters and often times their leading problems originated from not knowing the hardness of the alloy.
It is one of those reloading tools, much like the dial caliper or a vernier caliper, that make reloading and casting more efficient and accurate on the target.
The most important aspect of this signature line is that you don't realize it doesn't say anything significant until you are just about done reading it & then it is too late to stop reading it....
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Grand Poo Bah WA F.E.S.
In real life may you be the bad butt that you claim to be on social media.
Re: What hardness tester to buy
+1 on LBT.Ray Newman wrote:I have an older LBT Hardness Tester and find it reliable and easy to use. See:
http://www.lbtmoulds.com/hardtester.shtml
Even though I buy from a dealer with certified lead, I always check my lead for hardness. Just something that I started doing many years ago and have not stopped.
If you are a lead scrounger and have a developed an alloy of a certain and known brinel hardness number (BhN) -- AKA hardness -- that does not lead the bore, you can easily repeat the alloy content by mixing and then measuring the hardness. I know a more than a few cast bullet shooters and often times their leading problems originated from not knowing the hardness of the alloy.
It is one of those reloading tools, much like the dial caliper or a vernier caliper, that make reloading and casting more efficient and accurate on the target.
Plus you're supporting the little guy that does great work.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: What hardness tester to buy
+2Rusty wrote:+1 on LBT.Ray Newman wrote:I have an older LBT Hardness Tester and find it reliable and easy to use. See:
http://www.lbtmoulds.com/hardtester.shtml
Even though I buy from a dealer with certified lead, I always check my lead for hardness. Just something that I started doing many years ago and have not stopped.
If you are a lead scrounger and have a developed an alloy of a certain and known brinel hardness number (BhN) -- AKA hardness -- that does not lead the bore, you can easily repeat the alloy content by mixing and then measuring the hardness. I know a more than a few cast bullet shooters and often times their leading problems originated from not knowing the hardness of the alloy.
It is one of those reloading tools, much like the dial caliper or a vernier caliper, that make reloading and casting more efficient and accurate on the target.
Plus you're supporting the little guy that does great work.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- Shasta
- Senior Levergunner
- Posts: 1558
- Joined: Thu Sep 06, 2007 10:50 pm
- Location: Shasta County, the far right stronghold in California
Re: What hardness tester to buy
I have an older all-steel Saeco (the new ones are aluminum) which I like, but it will only test an actual bullet, not an ingot or other lead sample. Still, it gets me by just fine. If I were looking to buy a lead hardness tester now, I would go for the LBT.
SHASTA
SHASTA
California Rifle & Pistol Association LIFE Member
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
National Rifle Association BENEFACTOR LIFE Member
http://www.hcrpclub.org/schedule.html
avatar pic is Shasta Dam, Shasta Lake, & Mt. Shasta
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: What hardness tester to buy
I also have a Saeco. Mine has an aluminum body. It works just fine and is small and easy to store as it comes in a box about the size of a stick of bullet lube and has instructions included.
Re: What hardness tester to buy
Thx for the input Guys. There is an LBT on e-bay that I came across last nite. Pics are lousy so couldn't tell much about it and it has 6 days left. I'll watch it though and see where it goes. It is currently at $43 and I would venture to say it will go close to new or more. I will watch it for a day or 2 and if it gets ridiculous I will order one from LBT. It looks like the most simple to operate and I like the option to test ingots.
Perry
Perry
Perry in Bangor----++++===Calif
Re: What hardness tester to buy
Another vote for the LBT, mine is going on it's 24th year.
A lead thermometer is pretty handy as well.
Anything you can do to stop the guess work when casting is a big plus.
---J
A lead thermometer is pretty handy as well.
Anything you can do to stop the guess work when casting is a big plus.
---J
Keep The Peace, Love and Harmony, These are the Gold Nuggets, All Else Is Sand !!
Re: What hardness tester to buy
The tester on e-bay is currently at $65 with 5 days left. I printed out the order form for LBT and will send it out tomorrow. I ordered a Thermometer from Amazon plus the new "Lyman Cast Bullet Handbook". My bullets are getting cheaper & cheaper all the time with everything I buy.
Perry
Perry
Perry in Bangor----++++===Calif