Questions on the 35Rem in a Marlin 336 for TERRY MURBACH

[SteveR]

Hi Terry,

Good to see you posting again. Would you be willing to share some of you favorite 35Rem handloads?
Also what cast do you recommend?

Thanks,
Steve

[stretch]

Good question, Steve!

Yes, please Terry!

-Stretch

[Terry Murbach]

Well let me see here:
R-P 35REM brass
Speer 180grJFP
35.0grs H322
WLR primers

W-W brass
R-P 200gr JSP CORE-LOKT
39.5GRS VARGET
WLR primers

YOU DOUBLE CHECK EVERY BIT OF THIS AGAINST YOUR MANUALS, THAT IS A CLEAR ORDER !!

I have a pile of 35 caliber cast bullets to test but never got a round tuit....not even a square tuit matter of fact.

[rjohns94]

Thanks Terry

[carbluesnake]

I have found 31.0 gr. Rx7 with a Rem. 200 gr RN. Velocity should be around 2050-2100 fps. I use this in my Model 8 Rem. and a Model 141 Rem. I also use 33.0 gr. Rx7 with a 158 gr. SP. (pistol bullet), velocity, I think, should be around 2300 fps.

[stretch]

YOU DOUBLE CHECK EVERY BIT OF THIS AGAINST YOUR MANUALS, THAT IS A CLEAR ORDER !!

YESSIR!

And thanks.

-Stretch

[SteveR]

Thank you Terry, I will check with the manuals.
I hope soon to find a mold for a 200gr cast. I bet cast will shoot fine in 35Rem, almost made for shooting cast.
I did find some of those Hornady sqishy point 200gr, hope to do a range report on them.

Thanks again,
Steve

[Bullard4075]

Well let me see here:
R-P 35REM brass
Speer 180grJFP
35.0grs H322
WLR primers

W-W brass
R-P 200gr JSP CORE-LOKT
39.5GRS VARGET
WLR primers

YOU DOUBLE CHECK EVERY BIT OF THIS AGAINST YOUR MANUALS, THAT IS A CLEAR ORDER !!

I have a pile of 35 caliber cast bullets to test but never got a round tuit....not even a square tuit matter of fact.

Thanks Terry!