Colt 32 New Police -- Finished Project (70 Years Later...)
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Colt 32 New Police -- Finished Project (70 Years Later...)
For folks who aren't familiar with these old Colt's, here's a little background info:
"The Colt New Police is a double-action, 6-shot revolver chambered in the .32 New Police (which is identical to the .32 S&W Long) or the 32 Colt (which is about 0.020" smaller in diameter). Although a 32 Colt can be loaded and fired in the New Police, it is not recommended, and it is impossible to load a .32 New Police into a 32 Colt chamber. The .32 New Police chambering was more popular than the 32 Colt.
The Colt New Police was manufactured from 1896 to 1907, with fixed sights having a round blade in front and a grooved rear sight. It was available with a 2.5", 4" or 6" barrel in a blued or nickel finish with hard rubber grips. The revolver was selected by then New York City Police Commissioner Teddy Roosevelt in 1896 to be the first standard issue revolver for NYPD officers. The New Police was replaced in the 1907 Colt catalog by the improved Colt Police Positive, which featured an internal hammer block safety and better lock work."
Here is what an old one originally looked like: This project gun was first started over 70 years ago by my late father... None of my brothers or I remember all of its history, other than he wanted a "heavier barrel" with a clearer "fixed target sight". The former was achieved by carefully fitting a tapered sleeve over the original barrel, after removing the round front sight, and then adding a new ramped-style front sight. The topstrap was then filed smooth -- eliminating the groove for the rear sight -- and a new fixed square blade was silver-soldered on top. A length of grooves were also filed into the backstrap, matching those filed into the front ramp, improving the grip somewhat. I'll admit, it does feel really good in hand.
That work was all done in the late 40's after my dad returned home from England. He'd work on it in his locksmith shop in-between other jobs. We think his intention was to make a quick-pointing handgun that was a little muzzle heavy, with easily seen sights, and a ramped barrel so he could quickly draw it, point it and use it in defense of the shop and his livelihood. We 4 boys first saw this old Colt when we found it in the late 60s -- fully loaded in a holster! -- back when we were ages 6, 6 (as I am a twin), 8 and 9. The truth is, my dad did hide it very well! But with 4 boys eagerly "looking for new stuff" to play with, we were bound to find something somewhere! Luckily, we were all well-educated about safe gun handling even back then... While my dad did the actual teaching, I'll sure bet that my mother had something to do with that curriculum being taught to us.
And it's a dang good thing we all listened too!
Fast forward another 50 odd years and this old revolver finally lands in my lap after my twin, who doesn't load for the 32s, passed it along to me after finding it "yet again" while clearing out some stuff for my mom. (This was years after his other guns had been inherited by the boys.) While all the metal work was done after WWII, the cylinder, crane, release and some screws has all been all polished in-the-white somewhere along the line. The rest of the gun had faded to an almost olive drab color, maybe due to some cold blue that was applied decades ago? So it was a visual mess when I got it -- but it has a great backstory.
Anyway, to bring this posting to a close, I spent a bunch of hours carefully rubbing some warmed Brownell's Oxpho-Blue (using the "cream" formulation, as it has "cling" which works better on round parts) into the warmed metal parts. After numerous coats, I think it's about as good as I can get it for a home job...
I think my dad would be very pleased that his (make that... "our") 70 years-in-the-making project gun is finally done!
So here it is for your viewing pleasure -- The Locksmith Special!
It's a one-of-a-kind "Heavy Barrel, Fixed Target Sight" version of Colt's 32 New Police: I think it's pretty neat, and am really happy with how it turned out.
Oh, by the way... I don't think my dad was too concerned about any "collector value" of this piece back when he started, as that was in the era of cutting down milsurp rifles to use for deer hunting. Any value to us today is as a reminder of our father's passion for guns and shooting, and him, and as an interesting shooter. It succeeds on all those points.
Now I just need to reload for it and go fire off a salute to my dad!
Tight groups to all.
Old No7
"The Colt New Police is a double-action, 6-shot revolver chambered in the .32 New Police (which is identical to the .32 S&W Long) or the 32 Colt (which is about 0.020" smaller in diameter). Although a 32 Colt can be loaded and fired in the New Police, it is not recommended, and it is impossible to load a .32 New Police into a 32 Colt chamber. The .32 New Police chambering was more popular than the 32 Colt.
The Colt New Police was manufactured from 1896 to 1907, with fixed sights having a round blade in front and a grooved rear sight. It was available with a 2.5", 4" or 6" barrel in a blued or nickel finish with hard rubber grips. The revolver was selected by then New York City Police Commissioner Teddy Roosevelt in 1896 to be the first standard issue revolver for NYPD officers. The New Police was replaced in the 1907 Colt catalog by the improved Colt Police Positive, which featured an internal hammer block safety and better lock work."
Here is what an old one originally looked like: This project gun was first started over 70 years ago by my late father... None of my brothers or I remember all of its history, other than he wanted a "heavier barrel" with a clearer "fixed target sight". The former was achieved by carefully fitting a tapered sleeve over the original barrel, after removing the round front sight, and then adding a new ramped-style front sight. The topstrap was then filed smooth -- eliminating the groove for the rear sight -- and a new fixed square blade was silver-soldered on top. A length of grooves were also filed into the backstrap, matching those filed into the front ramp, improving the grip somewhat. I'll admit, it does feel really good in hand.
That work was all done in the late 40's after my dad returned home from England. He'd work on it in his locksmith shop in-between other jobs. We think his intention was to make a quick-pointing handgun that was a little muzzle heavy, with easily seen sights, and a ramped barrel so he could quickly draw it, point it and use it in defense of the shop and his livelihood. We 4 boys first saw this old Colt when we found it in the late 60s -- fully loaded in a holster! -- back when we were ages 6, 6 (as I am a twin), 8 and 9. The truth is, my dad did hide it very well! But with 4 boys eagerly "looking for new stuff" to play with, we were bound to find something somewhere! Luckily, we were all well-educated about safe gun handling even back then... While my dad did the actual teaching, I'll sure bet that my mother had something to do with that curriculum being taught to us.
And it's a dang good thing we all listened too!
Fast forward another 50 odd years and this old revolver finally lands in my lap after my twin, who doesn't load for the 32s, passed it along to me after finding it "yet again" while clearing out some stuff for my mom. (This was years after his other guns had been inherited by the boys.) While all the metal work was done after WWII, the cylinder, crane, release and some screws has all been all polished in-the-white somewhere along the line. The rest of the gun had faded to an almost olive drab color, maybe due to some cold blue that was applied decades ago? So it was a visual mess when I got it -- but it has a great backstory.
Anyway, to bring this posting to a close, I spent a bunch of hours carefully rubbing some warmed Brownell's Oxpho-Blue (using the "cream" formulation, as it has "cling" which works better on round parts) into the warmed metal parts. After numerous coats, I think it's about as good as I can get it for a home job...
I think my dad would be very pleased that his (make that... "our") 70 years-in-the-making project gun is finally done!
So here it is for your viewing pleasure -- The Locksmith Special!
It's a one-of-a-kind "Heavy Barrel, Fixed Target Sight" version of Colt's 32 New Police: I think it's pretty neat, and am really happy with how it turned out.
Oh, by the way... I don't think my dad was too concerned about any "collector value" of this piece back when he started, as that was in the era of cutting down milsurp rifles to use for deer hunting. Any value to us today is as a reminder of our father's passion for guns and shooting, and him, and as an interesting shooter. It succeeds on all those points.
Now I just need to reload for it and go fire off a salute to my dad!
Tight groups to all.
Old No7
You do not have the required permissions to view the files attached to this post.
Last edited by Old No7 on Thu Oct 29, 2015 3:36 pm, edited 2 times in total.
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
- 2ndovc
- Advanced Levergunner
- Posts: 9352
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: Colt 32 New Police -- Finished Project (70 Years Later..
That looks pretty darned cool!
Have fun!
jb
Have fun!
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
-
- Levergunner 2.0
- Posts: 432
- Joined: Mon Feb 11, 2013 11:11 am
- Location: Texas
Re: Colt 32 New Police -- Finished Project (70 Years Later..
Great story ! A very Cool family treasure. ,,,,DT
Re: Colt 32 New Police -- Finished Project (70 Years Later..
+1Dusty Texian wrote:Great story ! A very Cool family treasure. ,,,,DT
That's a real dandy. Let us know how she shoots....
The Rotten Fruit Always Hits The Ground First
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
Re: Colt 32 New Police -- Finished Project (70 Years Later..
An ideal little woods-walker!
- gamekeeper
- Spambot Zapper
- Posts: 17458
- Joined: Thu Sep 06, 2007 3:32 pm
- Location: Over the pond unfortunately.
Re: Colt 32 New Police -- Finished Project (70 Years Later..
Nice looking one off revolver, great story too!....
Whatever you do always give 100%........... unless you are donating blood.
Re: Colt 32 New Police -- Finished Project (70 Years Later..
That's jus all right!! Starting to look like a Python!
- Ysabel Kid
- Moderator
- Posts: 27903
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: Colt 32 New Police -- Finished Project (70 Years Later..
No need to worry about "collectors value" with a back-story like that!
Only thing missing on her are the percussion nipples!
Only thing missing on her are the percussion nipples!
Re: Colt 32 New Police -- Finished Project (70 Years Later..
cool gun,
Regarding the Colt 32 New Police and the 32 S&W long the only visual difference was the bullet.
The Colt having a 100 gr flat nose and the S&W a 98 gr round nose.
good shooting------J
Regarding the Colt 32 New Police and the 32 S&W long the only visual difference was the bullet.
The Colt having a 100 gr flat nose and the S&W a 98 gr round nose.
good shooting------J
Keep The Peace, Love and Harmony, These are the Gold Nuggets, All Else Is Sand !!
-
- Advanced Levergunner
- Posts: 4296
- Joined: Wed Sep 15, 2010 12:57 pm
- Location: Vinita, I.T.
Re: Colt 32 New Police -- Finished Project (70 Years Later..
I really like that, but then I'm a sucker for any old Colt. Especially one with known provenance.
M. M. Wright, Sheriff, Green county Arkansas (1860)
Currently living my eternal life.
NRA Life
SASS
ITSASS
Currently living my eternal life.
NRA Life
SASS
ITSASS
- Streetstar
- Advanced Levergunner
- Posts: 3911
- Joined: Sun Jan 11, 2009 5:58 am
- Location: from what used to be Moore OK
Re: Colt 32 New Police -- Finished Project (70 Years Later..
Me too -- Im a Colt nerdM. M. Wright wrote:I really like that, but then I'm a sucker for any old Colt. Especially one with known provenance.
----- Doug
Re: Colt 32 New Police -- Finished Project (70 Years Later..
Finished project? Come on... we can't call it finished till we see how it shoots.
It looks great though!
It looks great though!
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Colt 32 New Police -- Finished Project (70 Years Later..
+2. Range Report due 11-2-15.BlaineG wrote:+1Dusty Texian wrote:Great story ! A very Cool family treasure. ,,,,DT
That's a real dandy. Let us know how she shoots....
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: Colt 32 New Police -- Finished Project (70 Years Later..
A treasure indeed... it is a very practical and functional piece but best of all its a family project that was planned and started by your dad; your dad must have been a neat guy !
cable