.375 or 38-55 Winchester loads by Paco kelly

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
JimK
Levergunner
Posts: 11
Joined: Fri Jun 28, 2019 5:28 pm

.375 or 38-55 Winchester loads by Paco kelly

Post by JimK »

I tried the Search feature but no results, I have to be doing something wrong I guess. anyhow, was searching for some articles/archives with the above info? any help? I have a Mod 94BB, I have some Buffalo Bore Heavy 38-55 255fn ammo ordered. If it shoots well,I'll take it hunting this fall.
Top
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: .375 or 38-55 Winchester loads by Paco kelly

Post by Pete44ru »

.

Your answer is in your other post on this same subject: viewtopic.php?f=1&t=74402

.
Top
JimK
Levergunner
Posts: 11
Joined: Fri Jun 28, 2019 5:28 pm

Re: .375 or 38-55 Winchester loads by Paco kelly

Post by JimK »

Thanks pard, found an article, good read. Of course, I'm not going to make up my own 300gr bullet like he did, ha. I just got in two boxes of the Buffalo Bore Heavy 38-55 255fn ammo and it is very well made stuff! If this rifle shoots it well, I'll just stick with it for now. Its been about 8 yrs since I even hunted with a levergun. That was a little marlin 1894CB in 45 Colt. I used the Hornady 250 XTP ( I forget the powder right now, doah!) anyhow, I shot a nice 4x3 muley at 75yds with it. It had a Williams peep also. I much prefer a peep.
Top
Post Reply

Return to “General Discussion”