Hey Guys, does anyone the know tangent leaf elevation screw size on these things? This one is loose and doesn't tighten.
Thanks, Terry
Sheard 3 leaf tangent sight question
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Sheard 3 leaf tangent sight question
You do not have the required permissions to view the files attached to this post.
Re: Sheard 3 leaf tangent sight question
Try calling Brownells and ask to speak to one of their gunsmiths.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- GunnyMack
- Advanced Levergunner
- Posts: 10254
- Joined: Mon Sep 19, 2016 7:57 am
- Location: Not where I want to be!
Re: Sheard 3 leaf tangent sight question
Its most likely a size 0 or 1, as to thread pitch without having to sight to try different ones i can't help. Brownells does ( or did) stock a screw assortment including 0 & 1 screws. NOT something you are going to find at ACE hardware..
BROWN LABS MATTER !!
Re: Sheard 3 leaf tangent sight question
As a worst-case last-ditch effort, you could try using some blue Loctite to snug it up -- once you get it placed exactly where you want it -- or you could muck up a few threads so it screws in tighter (is definitely a last-ditch fix).
Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
Re: Sheard 3 leaf tangent sight question
Thanks Guys. I'll call Brownells today and keep the blue loctite in mind just in case.