accurizer

Mescalero · Post by **Mescalero** » Wed Mar 13, 2013 10:10 pm

Did the accurizer come with instructions?
Can anybody provide a copy?

Blaine · Post by **Blaine** » Wed Mar 13, 2013 10:15 pm

First, find a 2# beater....

Mescalero · Post by **Mescalero** » Wed Mar 13, 2013 10:41 pm

Why not a #1?

Blaine · Post by **Blaine** » Wed Mar 13, 2013 11:20 pm

Mescalero wrote:Why not a #1?

use enough gun

Mescalero · Post by **Mescalero** » Wed Mar 13, 2013 11:25 pm

Ahhhhhh so,
grasshopper you are wise.

Blaine · Post by **Blaine** » Thu Mar 14, 2013 12:18 am

Mescalero wrote:Ahhhhhh so,
grasshopper you are wise.

Seriously, shouldn't that be sort of intuitive once you are looking at the thing sitting there? Tap Gently.

Old Ironsights · Post by **Old Ironsights** » Thu Mar 14, 2013 1:41 am

It probably did, but I dunno where it got off to.

The device is pretty simple, put your .22 into one end or the other of the tool (the diameters are defined somewhere an I will try to find the data)

Pick a forming Rod, insert into the tool opposite the boolit, then tap the rod lightly with a non-steel hammer.

Remove carrtridge and begin again. Thatt's all there is to it.

Rusty · Post by **Rusty** » Thu Mar 14, 2013 1:59 am

I think they did a write up on it ove
r on Gunblast.com that has pictures.

MacEntyre · Post by **MacEntyre** » Thu Mar 14, 2013 5:32 am

My ACU'R'ZR dies have colored rings to indicate the least significant digit in the bore size.

One colored ring = .221

two colored rings = .222

three colored rings = .223

Mescalero · Post by **Mescalero** » Thu Mar 14, 2013 7:08 am

Yes it is simple,
Thanks Macintyre, that is the kind of thing you would not know without the paperwork.

Chris83716 · Post by **Chris83716** » Thu Mar 14, 2013 9:17 am

Use only on wood, plastic, or rubber suface. is the only thing OI left out.

Chris

piller · Post by **piller** » Thu Mar 14, 2013 9:20 am

For the hammer, I use a rawhide mallet such as you would use in leatherworking. I bought it at Ace Hardware. It is light enough that I have to sometimes hit the forming rod more than once, but that is better than going too far on the first hit.

Mescalero · Post by **Mescalero** » Thu Mar 14, 2013 9:35 am

If we can get AJMD to pipe in, I plan to use an arbor press like he does.

J Miller · Post by **J Miller** » Thu Mar 14, 2013 10:17 am

I borrowed one of Paco's tools a couple years ago from a forum member and worked up a bunch of different ammo.

No idea if it improved the performance of the ammo or not as I've not fired a round of it yet.

Joe

Mescalero · Post by **Mescalero** » Thu Mar 14, 2013 10:57 am

Bro,
You have to get out more, and yes; I know it is problematic for you.
Don't you miss the days when an afternoon shooting involved putting guns & ammo in the ride and driving to the desert?

J Miller · Post by **J Miller** » Thu Mar 14, 2013 6:13 pm

Mescalero wrote:Bro,
You have to get out more, and yes; I know it is problematic for you.
Don't you miss the days when an afternoon shooting involved putting guns & ammo in the ride and driving to the desert?

Oh yeah, that is an understatement.

Joe

Mescalero · Post by **Mescalero** » Thu Mar 14, 2013 8:53 pm

Joe,
Did you know that I have a Ruger single six ( .22 ) with two cylinders and NO bag?

J Miller · Post by **J Miller** » Thu Mar 14, 2013 10:35 pm

Mescalero wrote:Joe,
Did you know that I have a Ruger single six ( .22 ) with two cylinders and NO bag?

No I didn't. You should have told me.
Email me what color bag you want.

Joe

Mescalero · Post by **Mescalero** » Thu Mar 14, 2013 10:38 pm

You have different colors???

pokey · Post by **pokey** » Thu Mar 14, 2013 11:04 pm

here's a scan of my instruction sheet, let me know if it is readable.

004.jpg

003.jpg

thanks paco, if you're reading this.

J Miller · Post by **J Miller** » Fri Mar 15, 2013 8:00 am

Mescalero wrote:You have different colors???

Click on the link at the bottom of my post. I have a rainbow of colors and even metallic red.

Is my link that invisible?

Joe

Mescalero · Post by **Mescalero** » Fri Mar 15, 2013 10:12 am

Traditional red.

mergus · Post by **mergus** » Fri Mar 15, 2013 4:34 pm

I was using mine just the other day. 6 taps on each bullet with the blunt/wadcutter insert and I see a big difference in impact on items floating in the water (belive it or not, thats a safe shooting activity where I live).

I loaned it to a friend who owns a Kimber .22 rifle. He tried it on paper and claims that it didn't make any difference in group size, but he also noticed a difference in terminal effect.

Mergus

J Miller · Post by **J Miller** » Fri Mar 15, 2013 6:08 pm

Mescalero wrote:Traditional red.

Oooooo, traditional red, can't go wrong with that.

Joe

Mescalero · Post by **Mescalero** » Fri Mar 15, 2013 7:00 pm

accurizer

accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer

Re: accurizer