Winchester 94 Legendary Frontiersman .38-55 Groove Diameter?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Winchester 94 Legendary Frontiersman .38-55 Groove Diameter?
I am considering one. Anyone out there own one and have you slugged the bore? I know every rifle is a law unto its self. I am curious to learn what I can before taking the plunge. Thanks, 1886.
Re: Winchester 94 Legendary Frontiersman .38-55 Groove Diame
Bought the rifle, .380". Now to find a .381" gas check projectile. Mt. Baldy used to offer a .381". Hope they still do. 1886.
-
ollogger
- Advanced Levergunner
- Posts: 2807
- Joined: Mon Jul 05, 2010 2:47 pm
- Location: Wheatland Wyoming
- Contact:
Re: Winchester 94 Legendary Frontiersman .38-55 Groove Diame
Nice Winchester im sure
I have a few molds for the 38-55, one is a Lee that puts them out at 381- 382 its not a GC
bullet, I used it in a old 94 with a bad bore it worked but it needed to be bout 385 dia
that bullet shoots very well in my Marlin CB, then when I load for more speed I use a RD mold or a old Ideal that are GC I sold the old 94 after a year of trying to make it shoot
The Marlin is sweet , But its not a Winchester
hope yours is a 10
ollogger
I have a few molds for the 38-55, one is a Lee that puts them out at 381- 382 its not a GC
bullet, I used it in a old 94 with a bad bore it worked but it needed to be bout 385 dia
that bullet shoots very well in my Marlin CB, then when I load for more speed I use a RD mold or a old Ideal that are GC I sold the old 94 after a year of trying to make it shoot
The Marlin is sweet , But its not a Winchester
hope yours is a 10
ollogger