henry rifle buttstock extender

[rossim92]

I have two henry rifles . one is a .22lr lever and the other is a .22 mag in pump, The buttstocks are a bit short for me. Can anyone recommend extensions that will add about three inches more or less. I am 6'3 tall with long arms.

[AJMD429]

I am not home at the moment so can't check our Henry 22, but Several firearms I've had, including Rossi leverguns, can be fit to the Rubber one made for the 10/22.


http://www.midwayusa.com/product/425407 ... bber-black

[marlinman93]

If you need a lot of length added, you probably wont get enough from a rubber buttplate. You might consider what target shooters use; an adjustable buttplate. They are made of aluminum, so they can be ground to the shape of your wood for a nice fit. Being adjustable makes them a perfect fit, without harming the existing wood, so it can be returned to original later. Some require a single hole drilled in the stock, but it's not a necessity, as you can trim the plate's post on the back side to make it flush with the mounting plate.
http://www.brownells.com/rifle-parts/st ... 16385.aspx

[mikld]

May or may not help; My Rossi Puma felt a bit short so I found a leather butt pad/cuff that laced up and looked "period". I added 1" of foam to the inside of the cuff and laced it up tight. Works for me...

Similar to this http://www.buffaloarms.com/Detail.aspx? ... 4&CAT=4018

[7.62 Precision]

Build a piece of wood to fit nicely, exactly the length you want, attached to the stock more or less permanently as fits your preference, and then get a nice looking leather buttstock cover to hide it.

[rossim92]

thanks for the input guys. All of those suggestions are noteworthy.