Paco Kelly's Leverguns.com

GunnyMack

When 'her' husband was in office, any time she was getting on either Marine 1( helocopter) or Air Force 1 with out him the call sign was changed to BROOM STICK 1! She was probably the most hated of all first "ladies" . Have heard she is also the most foul mouthed berating all that were und...

GunnyMack

This past Sunday morning I was up early enough to catch the Henry infomercial. As they were showing off the different models I thought to myself ' I wonder if they will put Dpris's torture test results on their website, or on the next infomercial. '

GunnyMack

I made the mistake of shooting plated bullets and that caused serious copper fouling.
After many hours scrubbing it has started to behave. Not only fouling minimized but groups shrank dramatically.

GunnyMack

Have slowly been reloading a bunch of military brass for use in my Armalite AR10. Picked up Winchester 150 FMJs to load. Finally settled on CFE223. Holds 5 shots under an inch @100. My 450 amazes me at how accurate that round is. Have tried IMR4227,Lil Gun, 5744, H110 and all shoot very close to the...

GunnyMack

Long time ago we were in Quebec on a fishing trip, one of my buddies was portaging a canoe wham he stepped over a blow down ON to a sleeping bear. He went one way, the bear another way and the canoe went a third way!

GunnyMack

Hornady 8th edition has Lil Gun at 22.2 max for 1300 FPS from a 6" revolver, Henry 20" has added 500 FPS!!
CFE PISTOL loads are right at published vels for pistol length barrels- NO GAIN for lengths!!!

Looking at the book load for H110, I might be able to get 2000!!!

GunnyMack

Lots more Trump signs then HRC ( I can't type out that name) around here. Although I enjoy seeing the signs that say

Hillary for PRISON 2016

GunnyMack

Just back from the farm, took my Henry 41 to test velocities with a few different powders. Best vels were from Lil Gun. Lil Gun, 22 grains 210 gr JHP 1821 FPS average. Not quite to MAX charge. H110, 20 grains 210 gr JHP 1574 FPS average. 5744, 19.1 grains 210 JHP 1250 FPS average. Some unburned stic...

GunnyMack

We can bait them, but we can't be any closer than 100 yards to the bait... This was our very first 'early' season, normally the season is first week on December. Now I'm not a biologist but I know that December is NOT the best time to bear hunt! From what I saw in the paper, the first 3 days of the ...

GunnyMack

So NJ finally gave us a 'better' bear season.the normal season is first week of December. We have had the past 5 days to either bow hunt( M,T,W) or bow/ muzzle loader (TH,F,S). I haven't been able to get out. I'm hoping to get in a tree and try to at least see how my luck goes. Taking my predator ca...

GunnyMack

Finally read the GUNS article, not much info on how well it shoots...

GunnyMack

How about a 25-20, 32-20 LEVER GUN from Henry!! Oh heck, a 25-35 even !!

GunnyMack

Finally read the GUNS article, not much info, no accuracy tests...

GunnyMack

If I understand correctly, the center fire guns are built in WI, the rim fire are done in Bayonne.
I'm an hour or so west of there, been toying with the idea of sending him my resume...

I heard about the 410 but the single shot rifle is new to me. Guess I'll have to watch his infomercial.

GunnyMack

Being on the east coast, is that the remains of a cyclone( our hurricane?) I'm not an old timer nor young of the year, worst storm I can remember was Sandy. Our power went out about 9 pm as the storm started getting bad, got the power back on 14 days and 14 hours later! My poor little generator was ...

GunnyMack

Cutting it down to what is the question! If you cut off just the choke section then you'll have a cyclinder bore 410. I have a 410 with a skeet choke, works fine for sporting, birds, slugs. Actually before non toxic shot was the law I shot many ducks with 3"#5's. A 410 will act like any other s...

GunnyMack

Latest issue of GUNS has a write up on that, haven't read it yet- HOLY COW, $1800 MSRP!!

GunnyMack

I got a used RWS MOD 45 years ago, guys kid tried to cock it, couldn't quite get it there and let go! That put enough bend in the barrel that you could see it bending upward. Sucker still shot tiny little groups tho! While I was in gummsmiff skool, I mentioned it to an instructor, he said bring it i...

GunnyMack

Failure to extract... I'm betting it's just so dirty that the extractor can't grab the rim. But still 21,000 rounds is nothing st sneeze at!

GunnyMack

NICE GROUPS! Many people have no idea how well a .22 can shoot at distance. While I lived in Colorado, 6200' elevation, my buddies and I sighted our .22's in at 100, shot them well past 200 on the prairie dog towns. Gave our CF's time to cool and it was a whole lot of fun, can watch your impacts and...

GunnyMack

After my recent headaches with a brand new Henry 41, I had made the mistake of loading up Berry plated stuff that FOULED so badly I was getting same kinds of groups. I scrubbed with brushes, Sweets 762 and about 500 patches later I got 1 hole groups with a few different hand loads. Try a copper clea...

GunnyMack

Yeah, that is a 'condor zone' slug!!
It sure looks impressive although at 11 bucks a pop I'm sure they won't sell many of em!

GunnyMack

So with a NW wind of 15-25 all day and a high temp of about 58 I decided to not go and chronograph loads today.
Was a good day to veg.

GunnyMack

Thanks! I really took a shine to stock making, but could never checker- astigisims be darned! The Redheaded Stepchild was a great learning experience, much of what I learned in that course I apply everyday! I went to gunsmith school at TSJC, one of my class mates was John Gallager who has gone on to...

GunnyMack

Bigbore442001, Couple years ago I picked up scent blocking pants & jacket, head cover. Saw a big difference in how the deer acted. Last year I ran across a product called HECS. It is a very simple suit that blocks your electrical signals. I was skeptical until I watched some videos on their webs...

GunnyMack

Griff, I'm SCOPED on the 41. Trying to figure out my load for NY deer season.
Having only been to Vegas once, was too young to hit the casinos I don't remember much other then seeing Wayne Newton's lawn on the approach into the airport. The ONLY green around! I much prefer the high mountian desert!

GunnyMack

Here in NW (ugh) Jersey, having some wind and a little rain watching the Weather Channel I'm wondering how everyone has ridden out the storm. Hope everyone is safe.

Hope to chronograph some 41 loads today, check tree stands for tomorrow's bear archery opener.

GunnyMack

Yes please ask! I'd like to know as well.

GunnyMack

Check out gun parts, they may have both barrels and stocks.

Those actions are strong! like the Mausers, STRONG LIKE BULL- SMART LIKE DUMP TRUCK.

GunnyMack

Tm an- I have heard on more then one. Occasion that Odumo owns SMITH & WESSON stock, A LOT OF IT! Can't confirm it but it shows the hypocrisy of the anti vile scum... What don't they understand about our constitution!?!?!!!!!!!!

GunnyMack

Yes, looters shot and left so the rest of the morons can see what's about to happen to them!
I praise every home owner/ business owner that stands their ground to stop those types!

GunnyMack

After getting my 41 worked out, I'm thinking about a 44& a357... Now a 22 as well! This is gonna get expensive!!!

GunnyMack

I doubt the head space will change. Accuracy on the other hand could go either way.
I'm so impressed by your efforts DPRIS! I'm waiting to see a post about breaking something. But also hoping it doesn't! Keep up the great work!

GunnyMack

I bet those folks you dealt with all vote for Scumbag, er I mean hrc... ( notice I DIDNT capilitize initals)! Sad to say this kind of treatment is the way of the world anymore. I'm the same way, ya screw me you are DONE getting my business. I support my local business's ( except 1, but that's a diff...

GunnyMack

The "old" style for mounting scopes on 22's use 3/8 dovetail rings. Can also use air gun rings. Easy enough to find, any of the gun shops in your area probably have a set.

GunnyMack

I think the SS barrel and aluminum are galling against each other while chambering. Stainless can be funny characters. Could try to polish the chamber but not easy on a lever gun without a real long polishing rod. Does your blued gun chamber the specials? Could be just minor difference in feed ramp,...

GunnyMack

Not old but here are a couple interesting shootin irons of mine. Ruger SINGLE SIX converted to 44 special. New 5 shot cylinder, 4" barrel, large spur hammer. Was my fishin vest gun when I lived in CO. What I (we) think started life as a Zoli shotgun. This was a box of parts when I got it. Had t...

GunnyMack

I have used quite a few of their stocks, good stuff. Cost of new vs labor to strip & refinish yours is a no brainer , and you can modify anyway you want! Put one of their thumb holes on a guy's savage slug gun, bedded it, floated it and he tells me it shoots 1 hole groups now! Guess I should do ...

GunnyMack

GREAT STORY! As I was reading that same line from Jerimiah Johnson was going thru my head! But then again every time I see an elk that goes thru my mind!

Im drooling for elk back straps now!

GunnyMack

I gotta send this to a buddy- he will fall to the floor laughing!!
His favorite jokes were-
Did you hear about the two peanuts walking down the sidewalk?
One of them was asalted!
Or
Why can't a bicycle stand by itself?
Cuz it's two tired!

Sorry...

GunnyMack

I can see Henry's website:
TORTURE TESTED TO 25,000+ PLUS ROUNDS- 'NUFF SAID!!!!

GunnyMack

Hmm, I'm thinking maybe you need to keep going until something FAILS!
If Henry sprung for the first 25,000, maybe they will cough up some more ammo!
I'd be curious to see you slinging 1000 rounds an hour, heck I'd even spell you some!
Can't wait to see accuracy results!

GunnyMack

I just looked at Boyd's, they have 1895GS stocks, $65, unfinished add another 10 bucks...

They make great stocks, just wish they would do custom spec stuff!

GunnyMack

Camp daddy,
I'm not sure what finish Marlin uses but it is going it is going to take some elbow grease to get to bare wood. You could try a commercial stripper, a cabinet scraper will help.
Another thought, try to find an UNFINISHED set from Boyd's. This way the original wood can stay untouched.

GunnyMack

Glad to be of service!
Hope you get it back up and running!!!

GunnyMack

Well done! Moose is good stuff!
Can't open the pic though...?

GunnyMack

Gun parts shows your locking block! See link below!
http://www.gunpartscorp.com/Manufacture ... -41236.htm

Looks to me like a drop in part, maybe minor fitting.

GunnyMack

I am not familiar with that gun, but as I have fitted locking bolts in a few shotguns, you have a worn out locking system. I'll look it up, try to get back to you. If gun parts has one, order it , it may drop in with minor fitting, or it may not. If one can't be had, find a GOOD welder and teach you...

GunnyMack

MM, sounds to me to be more of case sizing. Clarify this a little bit more, are the bullets setting back IN the mag tube or when you chamber a round? If they set back under recoil then it's your crimp. If it happens when clambering the round(s) then I would say it's over size bullet/ under size Lead...

GunnyMack

I saw on Fox News app yesterday that a hunter in Wyoming was returning to his elk to pack it out when he too was attacked by a grizz.

Search found 10005 matches