OT 1903A4 update
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
OT 1903A4 update
For those interested I sent off an e-mail to Navy Arms about the 1903A4 they will be bringing to the market. It will be an original receiver with a Pedersoli barrel and a Chinese scope that will be a reproduction of the original.
Yes about 90 days, the product will be at the distributors
of Glen Zanders Sporting Goods, Centerfire Systems, and
AIM. You local dealer will need to place an order with
one of these distributors.
I'm not sure who AIM is, but we'll find out.
Yes about 90 days, the product will be at the distributors
of Glen Zanders Sporting Goods, Centerfire Systems, and
AIM. You local dealer will need to place an order with
one of these distributors.
I'm not sure who AIM is, but we'll find out.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
- 2ndovc
- Advanced Levergunner
- Posts: 9362
- Joined: Fri Sep 07, 2007 11:59 am
- Location: OH, South Shore of Lake Erie
Re: OT 1903A4 update
AIM Surplus is in Southern OH. Nice people to deal with.
I, for one am really looking forward to these. I hope Navy Arms does it right.
jb
I, for one am really looking forward to these. I hope Navy Arms does it right.
jb
jasonB " Another Dirty Yankee"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
" Tomorrow the sun will rise. Who knows what the tide could bring?"
Re: OT 1903A4 update
The scope will be the only thing I have concerns about. after all if worse comes to worse you can always fit another barrel.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: OT 1903A4 update
Any ballpark on the price?
Re: OT 1903A4 update
Sorry, no idea. I'll bet they're going to be proud of it though.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: OT 1903A4 update
I thought i had seen a price in the 900.00 range also known as well out of my range!Just can not remember where-dementia at 51 sucks!
- Ysabel Kid
- Moderator
- Posts: 27916
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: OT 1903A4 update
US, Italian and Chinese parts on a Springfield 1903A4.
Yes, we live in a global community!
Yes, we live in a global community!
Re: OT 1903A4 update
Doesn't seem right for a US service rifle does it but I'd worry more about the scope then the barrel.Still don't think the chinese stuff is up to grade.
Re: OT 1903A4 update
I remember back in the early 60's the mark of something that was cheap and guaranteed to fall apart before you were done with it was the made in Japan sticker on the bottom. It became clear after a time that makers in Japan were building to a price point. I'm sure that if a wholesaler here in this country contacted a manufacturer in China and said they wanted such and such a product and the price was the last concern they cold attain any level of quality they wanted.
If you're into music go track down a "Bluegrass180" Guitar and you'll find it's an exact copy of a Martin.
If you're into music go track down a "Bluegrass180" Guitar and you'll find it's an exact copy of a Martin.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: OT 1903A4 update
It sounds awfully ambitious to me... there are still a lot of really nice 03A3's on the market. For less than $900
I guess I should get a GI receiver and re-work the commercial Santa Fe I bought a few years ago........every thing else is late 03A3 on that rifle
I guess I should get a GI receiver and re-work the commercial Santa Fe I bought a few years ago........every thing else is late 03A3 on that rifle
always press the "red" button--- it's worth the effort and the results can be fun
Re: OT 1903A4 update
More 03A3 receivers having holes drilled in them... GREAT!Rusty wrote:For those interested I sent off an e-mail to Navy Arms about the 1903A4 they will be bringing to the market. It will be an original receiver with a Pedersoli barrel and a Chinese scope that will be a reproduction of the original.
~Michael
Re: OT 1903A4 update
Are Navy arms and Gibbs rifle company the same? Gibbs has an ad up for this and the price is 995.00 I believe. Rusty I have no doublts about the chinese ability to copy things as I ve seen it first hand.I think they make the malcolm scopes for leatherwood possibly and there has been good and bad press about those. Not saying I still don't want one. Just that it may be more of a problem area then the barrel down the road-the Italians have a good reputation with barrels and were making thier own for the lend lease M1's after WW2.Any way just my .02