L/F Dis/Re-assembly Instructions for LSI Puma M92
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
L/F Dis/Re-assembly Instructions for LSI Puma M92
As the tilte says I am looking for the instructions to dismantle/reassemble my s/s LSI Puma M92 454 Casull rifle.
While I was out on my last trip I was doing a bit of fast shooting and on the last round the extractor broke off so I need to pull it apart and replace the broken pieces.
So instead of blindly going where I have not gone before I figured having instructions would help pave the way to a successful repair...
I'm in Canada so sending it back for warranty would be more of a hassle than just fixing it myself.
Thanks for any help.
CC
While I was out on my last trip I was doing a bit of fast shooting and on the last round the extractor broke off so I need to pull it apart and replace the broken pieces.
So instead of blindly going where I have not gone before I figured having instructions would help pave the way to a successful repair...
I'm in Canada so sending it back for warranty would be more of a hassle than just fixing it myself.
Thanks for any help.
CC
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Order Steve Young's DVD. Just go to Steve's Gunz and look it up.
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
- CowboyTutt
- Advanced Levergunner
- Posts: 3732
- Joined: Tue Sep 11, 2007 8:27 pm
- Location: Mission Viejo, CA
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Hobie +1. Steve is a "Puma Master". Not 100% sure if he is up and running electronically yet as he was hit by the hurricane in Texas, but I hear his phone works.
-Tutt
-Tutt
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Camp Cook, here are a few links that should help you out.
http://marauder.homestead.com/files/RossiDis.html
http://www.leverguns.com/articles/taylo ... _strip.htm
http://www.leverguns.com/articles/taylor/rossi.htm
http://marauder.homestead.com/files/RossiDis.html
http://www.leverguns.com/articles/taylo ... _strip.htm
http://www.leverguns.com/articles/taylor/rossi.htm
ScottS
"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
"No arsenal, no weapon in the arsenals of the world, is so formidable as the will and moral courage of free men and women."
-- Ronald Reagan
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Thanks guys printed off the link.
#13 shows the picture of the part that popped out of the front of the breechbolt assembly.
CC
#13 shows the picture of the part that popped out of the front of the breechbolt assembly.
CC
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Finally got around to pulling the rifle apart, I recieved the replacement parts a month or so ago but have been to busy working on other projects to get to this one.
I ended up pulling everything apart and when I put it back together everything worked fine like if I put an empty case in the chamber the bolt assembly closes perfectly and ejects the empty perfectly.
Then I put a couple of dummy rounds into the mag tube to check out feeding and the rounds will not lift up high enough to allow the bolt to pick up the round when levering the bolt forward back into battery.
It looks as if they are hitting the ejector which is sticking out a little bit in front of the bolt face.
Anyway I have pulled the rifle apart and put it back together several time now and I am still having the same problem.
Thanks for any thoughts to help me figure this problem out.
I ended up pulling everything apart and when I put it back together everything worked fine like if I put an empty case in the chamber the bolt assembly closes perfectly and ejects the empty perfectly.
Then I put a couple of dummy rounds into the mag tube to check out feeding and the rounds will not lift up high enough to allow the bolt to pick up the round when levering the bolt forward back into battery.
It looks as if they are hitting the ejector which is sticking out a little bit in front of the bolt face.
Anyway I have pulled the rifle apart and put it back together several time now and I am still having the same problem.
Thanks for any thoughts to help me figure this problem out.
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Give Steve a call he is great to talk to and will help you.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Cookie, sounds like your problem is either a DVD or phone call away.
Old Law Dawg
- CowboyTutt
- Advanced Levergunner
- Posts: 3732
- Joined: Tue Sep 11, 2007 8:27 pm
- Location: Mission Viejo, CA
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
Cookie?
"It ain't dead! As long as there's ONE COWBOY taking care of ONE COW, it ain't dead!!!" (the Cowboy Way)
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
-Monte Walsh (Selleck version)
"These battered wings still kick up dust." -Peter Gabriel
Re: L/F Dis/Re-assembly Instructions for LSI Puma M92
"Cookie" you don't think that is new do you...
My dad even has it painted onto an old tool box of his...
CBT FYI I'm heading up on the grizzly hunt the last week of May thru the first week of June.
My dad even has it painted onto an old tool box of his...
CBT FYI I'm heading up on the grizzly hunt the last week of May thru the first week of June.