Bolt mounted Peep sights to replace the ugly Rossi 92 safety
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Bolt mounted Peep sights to replace the ugly Rossi 92 safety
It's taken a while to get this done . Over three years, two hurricanes and rotator cuff surgery in between but it looks like it's finally coming together. After 4 different design prototypes and testing, I posted a picture or two here and getting some input on how to improve it I finally realized that one style would not work for everyone so I settled on two styles. Next step was to get the prototypes done and tested then apply for the patents. Got that done and the prototypes shipped off to the CNC machine shop to be made. Hooray, we're rolling now right? Well, not quite. The CNC shop had some machines that went down that put things on hold. Now, 6 months later we finally get that worked out (new CNC machines shop) and the parts are being made as I write this.
Yahoooo
When I first started this project that first one was fixed, no windage or elevation (W&E) adjustment. W&E had to be done with the front sight. It just replaced the ugly bolt top safety with at least something that was more pleasant to look at and actually served a purpose.
After trying several modifications to make it W&E adjustable and not feeling good about any of them covering all the bases I decided to make two different versions.
This one will be called the Bolt Mounted Peep/Safety. It will replace the ugly safety with a fixed W&E peep sight but it will still serve as a functional safety.
When it's in this position the firing pin is blocked and it's obvious the safety on because you can't see through the sight.
Once it's turned so you can see through it for a sight picture it is now off safety and ready to fire.
The projected ship dates for this Peep/Safety should be january 2010. I'll post the price once we get some details worked out.
This one will be called the Bolt Mounted safety replacement elevation adjustable peep sight. It will eliminate that ugly wart safety. Just for clarity, the Rossi 92 still has the 1/4 cock notch on the hammer just like the original Win 92. The Wart safety didn't appear on the Rossi's until about 1999-2000 and the EMF imported rossi's didn't have them until 2006.
Thanks to Doctor Tim Skinner for modifying his sight and making them for me so they work with my adaptor this Bolt Mounted safety replacement elevation adjustable peep sight will be ready to ship before the end on this month.
A lot of you guys have ask abut this so itf you are still interested I'm taking order now. The projected price for now will be $59.95 with $7.95 USPS Priority mail S&H.
Best way to contact me is my email. (see below)
Yahoooo
When I first started this project that first one was fixed, no windage or elevation (W&E) adjustment. W&E had to be done with the front sight. It just replaced the ugly bolt top safety with at least something that was more pleasant to look at and actually served a purpose.
After trying several modifications to make it W&E adjustable and not feeling good about any of them covering all the bases I decided to make two different versions.
This one will be called the Bolt Mounted Peep/Safety. It will replace the ugly safety with a fixed W&E peep sight but it will still serve as a functional safety.
When it's in this position the firing pin is blocked and it's obvious the safety on because you can't see through the sight.
Once it's turned so you can see through it for a sight picture it is now off safety and ready to fire.
The projected ship dates for this Peep/Safety should be january 2010. I'll post the price once we get some details worked out.
This one will be called the Bolt Mounted safety replacement elevation adjustable peep sight. It will eliminate that ugly wart safety. Just for clarity, the Rossi 92 still has the 1/4 cock notch on the hammer just like the original Win 92. The Wart safety didn't appear on the Rossi's until about 1999-2000 and the EMF imported rossi's didn't have them until 2006.
Thanks to Doctor Tim Skinner for modifying his sight and making them for me so they work with my adaptor this Bolt Mounted safety replacement elevation adjustable peep sight will be ready to ship before the end on this month.
A lot of you guys have ask abut this so itf you are still interested I'm taking order now. The projected price for now will be $59.95 with $7.95 USPS Priority mail S&H.
Best way to contact me is my email. (see below)
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
Excellent! I hope they sell like hotcakes for you!!
Is the Bolt Mounted Peep/Safety about the right height for the factory sights?
Is the Bolt Mounted Peep/Safety about the right height for the factory sights?
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
Tycer wrote:Excellent! I hope they sell like hotcakes for you!!
Is the Bolt Mounted Peep/Safety about the right height for the factory sights?
Well, yes and no. Depending on the caliber, octagon or round barrel and barrel length the front sights that come on the gun won't even work with the rear sights that come on it.
The middle ground is the fronts sights on the 38/357 guns will work. The fronts for the heavier recoiling 44mag and 454 and heavy loaded 45lc guns with the 16" barrel may be too short.
There's a few ways to go. Either try it then figure out what it needs or just buy a really tall one and file it until you get it where you want it or use a temporary sight made of tape built up then trim and measure and order the style and height you need.
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
That's good news. Glad to hear it.
John
Family, blue steel & wood, hot biscuits, and fresh coffee.
Luke 22:36 Romans 12:17-21 Ephesians 4:26-32
"Life brings sorrow and joy alike. It is what a man does with them - not what they do to him - that is the true test of his mettle." T. Roosevelt
Family, blue steel & wood, hot biscuits, and fresh coffee.
Luke 22:36 Romans 12:17-21 Ephesians 4:26-32
"Life brings sorrow and joy alike. It is what a man does with them - not what they do to him - that is the true test of his mettle." T. Roosevelt
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
FWIW - The 2nd option, above, should work just fine on 16" barreled .45 Rossi M92's - Since that's almost identical to the Skinner Lo-Pro that I mounted in a replacement safety plug I made, this past June.
My .45 Rossi 16" Model 92 zeroed in three shots, after I mounted it.
The safety/sight is so well-centered with the bore, that the adjustment after zeroing shot #1 was to move the front sight approx 1/32" to one side, the adjustment after zeroing shot #2 was to elevation (2 turns), with no further adjustments req'd as verified by shot #3 being on target perfectly.
Subsequent shooting has borne out the veracity of that zero.
Kiowa's offering a good deal, folks - considering that I had to not only buy the Skinner, but also make a safety replacement plug, then D/T it for the Skinner, too.
.
My .45 Rossi 16" Model 92 zeroed in three shots, after I mounted it.
The safety/sight is so well-centered with the bore, that the adjustment after zeroing shot #1 was to move the front sight approx 1/32" to one side, the adjustment after zeroing shot #2 was to elevation (2 turns), with no further adjustments req'd as verified by shot #3 being on target perfectly.
Subsequent shooting has borne out the veracity of that zero.
Kiowa's offering a good deal, folks - considering that I had to not only buy the Skinner, but also make a safety replacement plug, then D/T it for the Skinner, too.
.
-
- Levergunner 2.0
- Posts: 349
- Joined: Thu Sep 13, 2007 5:28 pm
- Location: Stockton, CA.
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
I think that the Skinner Sight should work well. The 275 gr Barnes XPB bullet in 480 Ruger is light for caliber and should shoot low compared to heavier slugs moving slower. It should work slick with the fiberoptic front sight that came with the gun.
-
- Levergunner 2.0
- Posts: 186
- Joined: Fri May 02, 2008 12:17 pm
- Location: Dayton, Ohio
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
What a cool solution for a vexing problem. Great going guys. It's a sight and the safety!! Great idea!!!
I glad to see you solved the problem in style.
Rifleman 336
I glad to see you solved the problem in style.
Rifleman 336
Never bite off more than you can chew.
- O.S.O.K.
- Advanced Levergunner
- Posts: 5533
- Joined: Sun Apr 27, 2008 4:15 pm
- Location: Deep in the Piney Woods of Mississippi
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
Nate - seny an email regarding this.
That adjustable sight shown is just the thing I need - kills two birds with one stone!
I figure that a taller front sight will be needed to comensate for the increased height of the rear?
Great job solving a PITA problem!
That adjustable sight shown is just the thing I need - kills two birds with one stone!
I figure that a taller front sight will be needed to comensate for the increased height of the rear?
Great job solving a PITA problem!
NRA Endowment Life
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
Phi Kappa Sigma, Alpha Phi 83 "Skulls"
OCS, 120th MP Battalion, MSSG
MOLON LABE!
-
- Levergunner
- Posts: 23
- Joined: Tue Dec 29, 2009 5:16 am
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
i like... now i just have to decide which sight upgrade im doing first.. my tech sight 4 my cz452 or this 4 my .45 trapper... o to be made of money and to have the time to spend it... lol... bravo zulu on a great job
A human being should be able to change a diaper,plan an invasion,butcher a hog,conn a ship,write a sonnet,balance accounts,build a wall,comfort the dying,take orders,give orders,cooperate,act alone,solve equations,pitch manure,program a computer,cook a tasty meal,fight efficiently,die gallantly.Specialization is for insects.
RH
RH
-
- Levergunner 2.0
- Posts: 163
- Joined: Sat Jul 25, 2009 4:37 pm
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
What is the projected delivery date on these now? TIA
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: Bolt mounted Peep sights to replace the ugly Rossi 92 safety
It took a bit longer to get all the pieces but everythings here and we are shipping those now.fatoldfool wrote:What is the projected delivery date on these now? TIA
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015