Who has a Win.1876 and willing to take measurements?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Levergunner 2.0
- Posts: 229
- Joined: Wed Nov 25, 2009 12:09 pm
- Location: Bismarck ,Arkansas
Who has a Win.1876 and willing to take measurements?
I already have too many projects going as it is but its eating on me . I would like to eventually build a replica Winchester 1876 from barstock.. Who has one and can give me a few measurements off of it? I'd like to draw it out and get it started..
need to know where the 1876 dims differs from the smaller 1873 receiver..Starting with the length, width and depth of the mortise in which the brass cartridge carrier travels...?
need to know where the 1876 dims differs from the smaller 1873 receiver..Starting with the length, width and depth of the mortise in which the brass cartridge carrier travels...?
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: Who has a Win.1876 and willing to take measurements?
I can't to see this one given your past expertise.
Old Law Dawg
-
- Levergunner 2.0
- Posts: 229
- Joined: Wed Nov 25, 2009 12:09 pm
- Location: Bismarck ,Arkansas
Re: Who has a Win.1876 and willing to take measurements?
Thanks kimwcook ...I feel guilty I based the 1873 project on a used receiver rather than building the receiver from barstock ..So to get that bit of redemption , figure I'll build receiver for an 1876 ...reasonable proposition as I cant find a used 1876 receiver within my humble budget...and 'sides its more satisfying to build the whole thing
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Who has a Win.1876 and willing to take measurements?
+1kimwcook wrote:I can't (wait) to see this one given your past expertise.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Who has a Win.1876 and willing to take measurements?
+2Griff wrote:+1kimwcook wrote:I can't (wait) to see this one given your past expertise.
Re: Who has a Win.1876 and willing to take measurements?
I have an original. I would be willing to send it to you for you to pull what ever measurements you want off it and then return it. No ffl required. I would ask you pay for shipping and insurance.
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
-
- Levergunner 2.0
- Posts: 229
- Joined: Wed Nov 25, 2009 12:09 pm
- Location: Bismarck ,Arkansas
Re: Who has a Win.1876 and willing to take measurements?
Mike Johnson
Thats a very hospitable offer. Thank you Mike.. That could work real well.I will send a PM..Certainly I would be very happy to pay shipping and insurance both directions. You must check the parts and make note of any notable scratch or dings before shipping and check again upon return.I will guard against additional scratches and dings .I will make it right if anything happens to the receiver while its in my possession.
Guess I will move this 1876 project closer to front of the list
Thats a very hospitable offer. Thank you Mike.. That could work real well.I will send a PM..Certainly I would be very happy to pay shipping and insurance both directions. You must check the parts and make note of any notable scratch or dings before shipping and check again upon return.I will guard against additional scratches and dings .I will make it right if anything happens to the receiver while its in my possession.
Guess I will move this 1876 project closer to front of the list
Re: Who has a Win.1876 and willing to take measurements?
I screwed up folks, misread the post. I have an original 1886, not 1876. He still needs the measurements. sorry for the mistake.
Mike Johnson,
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
"Only those who will risk going too far, can possibly find out how far one can go." T.S. Eliot
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: Who has a Win.1876 and willing to take measurements?
Nice offer, Mike. To bad it's the wrong model. Someone please step up. This guy is an amazing machinist. You won't be sorry.
Old Law Dawg
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: Who has a Win.1876 and willing to take measurements?
Alphawolf45, KirkD has an original 1876 and would be very capable of all the measurment you would need. Real nice of me to offer his services ain't, it you might try a PM.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
-
- Levergunner 2.0
- Posts: 229
- Joined: Wed Nov 25, 2009 12:09 pm
- Location: Bismarck ,Arkansas
Re: Who has a Win.1876 and willing to take measurements?
Thanks Guys, youre a great crowd of levergunners..
Measurements would help but I dont really need'em.Since I am making all the parts there is no concern to be interchangeable with any authentic parts......... I know the overall length of the .45-60 cartridge and can change the dimensions of the 1873 to accommodate that longer cartridge..There might be a "gotcha" in there somewhere that I haven't anticipated but doubt there is anything in that project that could stop me altogether....
Measurements would help but I dont really need'em.Since I am making all the parts there is no concern to be interchangeable with any authentic parts......... I know the overall length of the .45-60 cartridge and can change the dimensions of the 1873 to accommodate that longer cartridge..There might be a "gotcha" in there somewhere that I haven't anticipated but doubt there is anything in that project that could stop me altogether....
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Re: Who has a Win.1876 and willing to take measurements?
It would be an honor to supply you with measurements! I'll shoot you a PM, Alphawolf45.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
-
- Levergunner 2.0
- Posts: 229
- Joined: Wed Nov 25, 2009 12:09 pm
- Location: Bismarck ,Arkansas
Re: Who has a Win.1876 and willing to take measurements?
Okay Guys Kirk has me all worked out with all the dimensions I could want.. Thankyou Kirk, you've done me a lotta good , holler if I can be help to you on something. ..
...
...
- kimwcook
- Advanced Levergunner
- Posts: 7978
- Joined: Tue Sep 04, 2007 10:01 pm
- Location: Soap Lake, WA., U.S.A.
Re: Who has a Win.1876 and willing to take measurements?
Oh, boy! Can't wait to see this one.
Old Law Dawg
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Who has a Win.1876 and willing to take measurements?
Ditto... again!kimwcook wrote:Oh, boy! Can't wait to see this one.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!