Got my Re-Bored 1893 Marlin back!

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:

Got my Re-Bored 1893 Marlin back!

Post by rbertalotto »

I sent it to JES Rifle Reboring ( http://www.35caliber.com/ ) just over two weeks ago. Got it back this morning. Amazing fast service considering it had to go from Massachusetts to Oregon and back!

It is an old 1893 Marlin that I picked up for $435. The rebore and rifling, from 30-30 to 38-55 was $225 including shipping back to me.

I opted for the three groove rifling as I had heard excellent reports about it. Although 6 and 8 groove are offered.

I loaded up twenty cartridges and headed to the range. (9g of Unique under a Lee cast 265g bullet with SPG lube )

First group was five shots in four holes at 50 yds with iron barrel mounted sights!

Image

The next four groups were actually better but I didn't remember to photograph them. One group was three holes (three bullets into one hole and two others close by ) under a half dollar in size!

To say I'm ecstatic would be an understatement.

Image


I'm sending a 1978 Winchester Model 94 out tomorrow AM for the same services
Last edited by rbertalotto on Mon Nov 26, 2012 5:33 pm, edited 1 time in total.
Roy B
Dartmouth, MA
www.rvbprecision.com
User avatar
Old Savage
Posting leader...
Posts: 16736
Joined: Mon Sep 03, 2007 3:43 pm
Location: Southern California

Re: Got my Re-Bored 1893 Marlin back!

Post by Old Savage »

Wow, congrats.
In the High Desert of Southern Calif. ..."on the cutting edge of going back in time"...

Image
Bill in Oregon
Advanced Levergunner
Posts: 9039
Joined: Sun Jun 29, 2008 10:05 am
Location: Sweetwater, TX

Re: Got my Re-Bored 1893 Marlin back!

Post by Bill in Oregon »

Roy, I'd be tickled as well. Way to go getting a fine old Marlin back in the traces. The .38-55 is a wonderful old cartridge.Steve Garbe used a .38-55 loaded with black powder and a cast bullet to kill his elk a few years back.
3leggedturtle
Advanced Levergunner
Posts: 4145
Joined: Fri Dec 21, 2007 11:34 am
Location: north of Palacios about 1400 miles

Re: Got my Re-Bored 1893 Marlin back!

Post by 3leggedturtle »

Thats real nice. Bet that load kicks like a baby bunny and will penetrate lenghtwise thru an elk. Jesse just keeps doing good and fast turnarounds. I always hear good compliments 'bout im
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres

250 Savage... its what the 223 wishes it could be...!
User avatar
Ji in Hawaii
Senior Levergunner
Posts: 1987
Joined: Sat Jan 15, 2011 1:05 pm
Location: Moku Manu, Hawai'i

Re: Got my Re-Bored 1893 Marlin back!

Post by Ji in Hawaii »

She's a beauty, and what a deal! Great investment on a great shooter. Enough time left of your deer season to get her out into the field?
Illegitimus Non Carborundum
Akā, ʻo ka poʻe hilinaʻi aku iā Iēhova, e ulu hou nō ko lākou ikaika;
E piʻi ʻēheu aku nō lākou i luna, e like me nā ʻaito;
E holo nō lākou, ʻaʻole hoʻi e māloʻeloʻe,
E hele mua nō lākou, ʻaʻole hoʻi e maʻule.
`Isaia 40:31
User avatar
Blaine
Posting leader...
Posts: 30495
Joined: Mon Dec 17, 2007 2:22 pm
Location: Still Deciding

Re: Got my Re-Bored 1893 Marlin back!

Post by Blaine »

I'm sending a 1978 Winchester Model 94 out tomorrow AM for the same services
What else beside a re-bore would a 336 in 30 wcf need to be a 38-55?
The Rotten Fruit Always Hits The Ground First

Proud Life Member Of:
NRA
Second Amendment Foundation
Citizens Committee For The Right To Keep And Bear Arms
DAV
User avatar
Dave
Senior Levergunner
Posts: 1658
Joined: Sun Sep 09, 2007 8:00 pm
Location: TN

Re: Got my Re-Bored 1893 Marlin back!

Post by Dave »

That is a really nice looking gun and it is shooting great! Congrats on a winner
Chuck 100 yd
Advanced Levergunner
Posts: 6972
Joined: Tue Apr 03, 2007 8:52 pm
Location: Ridgefield WA. USA

Re: Got my Re-Bored 1893 Marlin back!

Post by Chuck 100 yd »

BlaineG ,Just the re bore. all else should be just fine.
My Marlin 336 Cowboy .38-55 shoots just like that pictured with a 250 gr. cast bullet over 14-15 gr. 2400 .
I would not hesitate to take it hunting at close to medium ranges. :wink:
User avatar
6pt-sika
Advanced Levergunner
Posts: 9509
Joined: Wed Dec 19, 2007 7:15 pm
Location: Virginia

Re: Got my Re-Bored 1893 Marlin back!

Post by 6pt-sika »

Very nice !

But now you need to find another 1893 with a sewer pipe barrel and reline it to 32-40 :wink:
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
1894c

Re: Got my Re-Bored 1893 Marlin back!

Post by 1894c »

Old Savage wrote:Wow, congrats.
i'll see that WOW and raise you another...WOW...thanks for sharing... :)
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:

Re: Got my Re-Bored 1893 Marlin back!

Post by rbertalotto »

What else beside a re-bore would a 336 in 30 wcf need to be a 38-55?
Nothing......It should feed fine and eject fine. I did zero to this rifle and it feeds and ejects perfectly.

I relined an old Winchester 1873 with a 38-40 liner. You can read all about it on my web site... www.rvbprecision.com

I also have a Marlin 1889, Winchester 1866, Winchester 1892, another 1873 and a few SAA revolvers all in 38-40..........A great cartridge for both black powder and smokeless
Roy B
Dartmouth, MA
www.rvbprecision.com
User avatar
pokey
Advanced Levergunner
Posts: 2704
Joined: Mon Feb 09, 2009 10:19 pm
Location: La center, wa.

Re: Got my Re-Bored 1893 Marlin back!

Post by pokey »

nice :mrgreen:
careful what you wish for, you might just get it.

"BECAUSE I CAN"
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: Got my Re-Bored 1893 Marlin back!

Post by pwl44m »

Makes Me feel better about My Marlin Safety,but it would be a reline as it is already 38-55. There is one at a local Pawn shop for $500.
How does Jes address the caliber stamp ?
Perry
Perry in Bangor----++++===Calif
User avatar
ollogger
Advanced Levergunner
Posts: 2807
Joined: Mon Jul 05, 2010 2:47 pm
Location: Wheatland Wyoming
Contact:

Re: Got my Re-Bored 1893 Marlin back!

Post by ollogger »

Well WOW, great rifle, and it comes back to shoot like that!
let us know on the 94 when it gets back

ollogger
20cows
Advanced Levergunner
Posts: 2278
Joined: Tue Apr 03, 2007 9:55 pm
Location: East West Texas

Re: Got my Re-Bored 1893 Marlin back!

Post by 20cows »

SWEET!

I have been very pleased with my Win 94 rebore. It's been several years now and I am still just as tickled as when I first got it back.
User avatar
KirkD
Desktop Artiste
Posts: 4406
Joined: Sat Apr 07, 2007 6:52 am
Location: Central Ontario, Canada
Contact:

Re: Got my Re-Bored 1893 Marlin back!

Post by KirkD »

Excellent! That was amazing turn around time and, by the looks of your groups, amazing quality job of re-boring. Now you have a classic looking Marlin that is a real tack driver.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
damienph
Senior Levergunner
Posts: 1734
Joined: Mon Mar 30, 2009 11:11 am
Location: Kansas

Re: Got my Re-Bored 1893 Marlin back!

Post by damienph »

That's impressive! I have just about talked myself into sending him my 94 Classic for a 38-55 rebore. Is your chamber for the long brass?
rbertalotto
Senior Levergunner
Posts: 1232
Joined: Thu Sep 17, 2009 3:45 pm
Location: Dartmouth, MA
Contact:

Re: Got my Re-Bored 1893 Marlin back!

Post by rbertalotto »

How does Jes address the caliber stamp ?
He will restamp if you like


Is your chamber for the long brass?
Ya know, I'm not sure what reamer Jess uses. We'll have to call him unless someone else knows. I use the short brass in all my 38-55 rifles. But Starline is backordered on the short brass until February of next year!
Roy B
Dartmouth, MA
www.rvbprecision.com
pwl44m
Advanced Levergunner
Posts: 3613
Joined: Sat Sep 04, 2010 7:48 pm
Location: East Linda Caif.

Re: Got my Re-Bored 1893 Marlin back!

Post by pwl44m »

Quote:
How does Jes address the caliber stamp ?


He will restamp if you like

So it comes back as a 30-30 unless U specify ? Thanks, if I had mine relined it would be stamped correct already.
Perry
Perry in Bangor----++++===Calif
t.r.
Levergunner 3.0
Posts: 815
Joined: Fri Mar 21, 2008 10:00 am
Location: Ft. Braden, Florida

Re: Got my Re-Bored 1893 Marlin back!

Post by t.r. »

Very impressive shooting. Do you have plans to hunt with this rifle?

TR
Fire Up the Grill - Hunting is NOT Catch & Release!
Charles
Advanced Levergunner
Posts: 2004
Joined: Sat Dec 15, 2007 2:29 pm
Location: Deep South Texas

Re: Got my Re-Bored 1893 Marlin back!

Post by Charles »

That is first rate accuracy! After 500 to 1000 rounds the barrel will smooth up and groups will be smaller yet. You have a keeper there!
Post Reply