Extractor not holding shell in Rem 25. FIXED!
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Extractor not holding shell in Rem 25. FIXED!
Howdy,
UPDATE: I removed the worn extractor, annealed it, re-shaped it, fitted it, function tested, tempered it, polished the wear surfaces, oiled it and put it back together. Works a treat. Took about half an hour.
We'll see how many rounds it lasts. When I come up with the $40 I'll get the replacement one and the ejector spring as it is a bit worn.
The extractor of the Model 25 is letting the cartridge slide down towards the lifter just before the ejector smacks the case head, leaving the shell in the receiver about half the time. The extractor pivots on a pin with a spring and plunger exerting pressure on the tail end. The spring feels strong.
I can get a remanufactured one from Jack First for $40.
I'd like to try to fix it myself first.
Can I heat it with a torch and bend it over a bit and reshape? Do I need to re-temper it with an oil quench?
How would one go about fixing this?
Link to album of pictures: http://s9.photobucket.com/user/theonet/ ... t=3&page=1
Before:
After:
UPDATE: I removed the worn extractor, annealed it, re-shaped it, fitted it, function tested, tempered it, polished the wear surfaces, oiled it and put it back together. Works a treat. Took about half an hour.
We'll see how many rounds it lasts. When I come up with the $40 I'll get the replacement one and the ejector spring as it is a bit worn.
The extractor of the Model 25 is letting the cartridge slide down towards the lifter just before the ejector smacks the case head, leaving the shell in the receiver about half the time. The extractor pivots on a pin with a spring and plunger exerting pressure on the tail end. The spring feels strong.
I can get a remanufactured one from Jack First for $40.
I'd like to try to fix it myself first.
Can I heat it with a torch and bend it over a bit and reshape? Do I need to re-temper it with an oil quench?
How would one go about fixing this?
Link to album of pictures: http://s9.photobucket.com/user/theonet/ ... t=3&page=1
Before:
After:
Last edited by Tycer on Thu Sep 05, 2013 9:29 am, edited 3 times in total.
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
-
- Levergunner 2.0
- Posts: 212
- Joined: Sat Apr 05, 2008 11:49 am
- Location: Central Illinois
Re: Extractor not holding shell in Rem 25. Fix?
I just pulled one of mine apart and the extractor makes full contact with the cartridge. I think yours is just worn out. I would buy a new one.
Glad to know where I can buy parts.
Mack
Glad to know where I can buy parts.
Mack
Re: Extractor not holding shell in Rem 25. Fix?
Build it up with weld, re ut it and re shape it and then re temper it. Shouldn't cost more than a couple new ones.
- Sixgun
- Posting leader...
- Posts: 18713
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: Extractor not holding shell in Rem 25. Fix?
Save yourself a days worth of aggravation and do the above.----------6msmith1228 wrote:I just pulled one of mine apart and the extractor makes full contact with the cartridge. I think yours is just worn out. I would buy a new one.Mack
Re: Extractor not holding shell in Rem 25. FIXED!
UPDATE: I removed the worn extractor, annealed it, re-shaped it, fitted it, function tested, tempered it, polished the wear surfaces, oiled it and put it back together. Works a treat. Took about half an hour.
We'll see how many rounds it lasts. When I come up with the $40 I'll get the replacement one and the ejector spring as it is a bit worn.
We'll see how many rounds it lasts. When I come up with the $40 I'll get the replacement one and the ejector spring as it is a bit worn.
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
-
- Senior Levergunner
- Posts: 1002
- Joined: Tue Dec 11, 2007 1:28 pm
- Location: Arkansas Ozark Mts
Re: Extractor not holding shell in Rem 25. FIXED!
You done good, Tycer. Makes one feel good when you do some fixin' for yourself.Tycer wrote:UPDATE: I removed the worn extractor, annealed it, re-shaped it, fitted it, function tested, tempered it, polished the wear surfaces, oiled it and put it back together. Works a treat. Took about half an hour.
"If a man does away with his traditional way of living and throws away his good customs, he had better first make certain that he has something of value to replace them." - Basuto proverb.
-
- Levergunner 3.0
- Posts: 995
- Joined: Mon Feb 04, 2008 10:29 pm
- Location: Idaho panhandle/Wyoming
Re: Extractor not holding shell in Rem 25. FIXED!
Been there...done that..mostly have more time nowadays than money..good for you!! Les
This is plagiarized from someone else, but I love it!
I was born a gun owner.
It wasn't a choice.
I didn't become one later in life.
I was born this way.
I was born a gun owner.
It wasn't a choice.
I didn't become one later in life.
I was born this way.
Re: Extractor not holding shell in Rem 25. FIXED!
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Re: Extractor not holding shell in Rem 25. FIXED!
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
Re: Extractor not holding shell in Rem 25. FIXED!
Ya done good Tycer. I would have made the attempt also. Heck I made an extractor for a 73 and it works perfect where as 2 that I ordered broke right away. Had U failed in Ur attempt then go the alternate route. Congratulations.
Perry
Perry
Perry in Bangor----++++===Calif