Anybody have a Wild West Guns Marlin takedown
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- fordwannabe
- Advanced Levergunner
- Posts: 3370
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Anybody have a Wild West Guns Marlin takedown
I know how to install the plate that makes it possible to separate the halfs. My questions are about the mag tube. I see the mag tube end is pinned in place and the thumbscrew goes into mag and what looks like a dove tail with just a hole in it in bottom of the barrel. My guess is the tube end is now threaded to accept a threaded portion of the thumbscrew with just a post going into the dovetailed piece installed in the barrel, can someone confirm any of this? Also what stops the magazine from sliding the whole way out when disassembling the rifle? Thanks.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
Re: Anybody have a Wild West Guns Marlin takedown
How about calling WWG?
I know a whole lot about very little and nothing about a whole lot.
- fordwannabe
- Advanced Levergunner
- Posts: 3370
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: Anybody have a Wild West Guns Marlin takedown
I spoke with Jim West personally at The Outdoor Show in Harrisburg last month he was not willing to share his Trade Secrets
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
- pdentrem
- Levergunner 2.0
- Posts: 369
- Joined: Sat May 15, 2010 8:41 pm
- Location: Niagara Region
- Contact:
Re: Anybody have a Wild West Guns Marlin takedown
Based upon my original Marlin 1893 TD, it looks to me to be identical.
Pierre
Pierre
-
- Senior Levergunner
- Posts: 1149
- Joined: Sat Sep 29, 2007 1:46 pm
Re: Anybody have a Wild West Guns Marlin takedown
Try you tube there are some videos on there about this gun
- pdentrem
- Levergunner 2.0
- Posts: 369
- Joined: Sat May 15, 2010 8:41 pm
- Location: Niagara Region
- Contact:
Re: Anybody have a Wild West Guns Marlin takedown
Likely he has extended the slot that is in the top of the mag tube to the bottom. Thus he can use a thumb knob to hold the tune in place. I took pics of the original from the bottom where the screw is visible, that holds the latch mechanism in place. On the top of the tube, the stud that the same latch mechanism is held by, the slot to allow movement of the tube can be seen. Clear as mud.
Pierre
Pierre
You do not have the required permissions to view the files attached to this post.
- fordwannabe
- Advanced Levergunner
- Posts: 3370
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: Anybody have a Wild West Guns Marlin takedown
Thanks Pierre.
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.
- fordwannabe
- Advanced Levergunner
- Posts: 3370
- Joined: Thu Apr 02, 2009 8:52 am
- Location: Womelsdorf PA
Re: Anybody have a Wild West Guns Marlin takedown
BTT
a Pennsylvanian who has been accused of clinging to my religion and my guns......Good assessment skills.