OT - New old roller arrived today...
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
- Killer Kanuck
- Levergunner 2.0
- Posts: 178
- Joined: Mon Sep 03, 2007 2:50 pm
OT - New old roller arrived today...
Little different than the average rolling block. Just a little bit shorter.
It's a Remington model 1871 Army rolling block pistol - caliber is 50 Remington Army/Navy centerfire (basically a short 50/70). It's an obvious refinish, but quite well done. Might be a good candidate to send away and have the action case colored. The grips do appear to be original, as one of the numbers on the grip frame matches the number in the inletting of the grips. You can still see the inspector's cartouche on the left side of the grip (it's CRS). Bore is in quite nice shape for a 120+ year old pistol. Hopefully sometime over the summer I'll be able to pick up dies and some brass and get her making noise again.
It's a Remington model 1871 Army rolling block pistol - caliber is 50 Remington Army/Navy centerfire (basically a short 50/70). It's an obvious refinish, but quite well done. Might be a good candidate to send away and have the action case colored. The grips do appear to be original, as one of the numbers on the grip frame matches the number in the inletting of the grips. You can still see the inspector's cartouche on the left side of the grip (it's CRS). Bore is in quite nice shape for a 120+ year old pistol. Hopefully sometime over the summer I'll be able to pick up dies and some brass and get her making noise again.
Re: OT - New old roller arrived today...
Their making guns with CRS disease?
got enough of that already
Nice looking piece!
got enough of that already
Nice looking piece!
KI6WZU
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
NRA member
"When they call the roll in the Senate, the Senators do not know whether to answer 'present' or 'not guilty.'"
--President Theodore Roosevelt (1858-1919)
“Democracy must be something more than two wolves and a sheep voting on what to have for dinner”
Re: OT - New old roller arrived today...
exquisite... I hope you can get some videos of your plinking expedition.
what load are you going to use? I hope you can put some pics up of the ammo.
rollers rule !
what load are you going to use? I hope you can put some pics up of the ammo.
rollers rule !
- Killer Kanuck
- Levergunner 2.0
- Posts: 178
- Joined: Mon Sep 03, 2007 2:50 pm
Re: OT - New old roller arrived today...
It'll probably be a month or 2 before I get it out shooting, but I'll try to remember to take out the camera and get a short movie of it in action. I'm going to try a round ball over a load of FFFG to start and take it from there.Grizz wrote:exquisite... I hope you can get some videos of your plinking expedition.
what load are you going to use?
- Borregos
- Advanced Levergunner
- Posts: 4756
- Joined: Thu Sep 13, 2007 7:40 am
- Location: Ontario, Canada
Re: OT - New old roller arrived today...
Now that is nice, bore looks excellent!
Look forward to range report.
Look forward to range report.
Pete
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Re: OT - New old roller arrived today...
Excellent acquisition. I imagine the recoil is going to be impressive. Be sure to post a video of you firing the pistol, but the cameraman shouldn''t stand behind you so that the pistol smashes the camera as it cartwheels back after it tears itself out of your hands.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
- Killer Kanuck
- Levergunner 2.0
- Posts: 178
- Joined: Mon Sep 03, 2007 2:50 pm
Re: OT - New old roller arrived today...
Actually Kirk, from what I've heard it's not too bad. I guess a better description of the caliber would be "a really short 50/70".
-
- Levergunner 2.0
- Posts: 111
- Joined: Wed Sep 05, 2007 1:54 pm
- Location: Western WA
Re: OT - New old roller arrived today...
I'd be interested in seeing that cartridge. I'll bet it is close in size to the 56-50 Spencer....a cartridge I have a SERIOUS hankering to have installed into a sixgun by Hamilton Bowen...... 350gr bullet at about 750 fps.... Can you say ".50 Special"?
Wayne Miller
(Known as "Mossyrock" elsewhere)
"We thought about it for a long time... 'Endeavor to persevere.' And when we had thought about it long enough, we declared war on the Union."
Lone Watie
(Known as "Mossyrock" elsewhere)
"We thought about it for a long time... 'Endeavor to persevere.' And when we had thought about it long enough, we declared war on the Union."
Lone Watie
Re: OT - New old roller arrived today...
Way cool. I cant wait for the range report. Do you have a roller rifle to go with it?
Jeremy
GySgt USMC Ret
To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
GySgt USMC Ret
To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
- Killer Kanuck
- Levergunner 2.0
- Posts: 178
- Joined: Mon Sep 03, 2007 2:50 pm
Re: OT - New old roller arrived today...
Don't have a roller rifle....... yet. Saw a 44-40 one listed on a gunshop's website up here the other day though - may give them a call to get a little more info.
-
- Advanced Levergunner
- Posts: 2569
- Joined: Sat Sep 15, 2007 12:51 pm
Re: OT - New old roller arrived today...
What a beauty!!
"IT IS MY OPINION, AND I AM CORRECT SO DON'T ARGUE, THE 99 SAVAGE IS THE FINEST RIFLE EVER MADE IN AMERICA."
WIL TERRY
WIL TERRY
-
- Levergunner 3.0
- Posts: 709
- Joined: Wed Sep 12, 2007 8:25 pm
- Location: Arnett WV
- Contact:
Re: OT - New old roller arrived today...
Looks sweet!!! I'd like to have one of those to go with the 50-90 Roller that I have.
SASS#43836
Ain't easy havin' pals.
Ain't easy havin' pals.
- Killer Kanuck
- Levergunner 2.0
- Posts: 178
- Joined: Mon Sep 03, 2007 2:50 pm
Re: OT - New old roller arrived today...
Called about that 44-40 roller, but ended up buying a shotgun instead.
20g Miroku Field grade over/under with 28" barrels - hopefully will be death for grouse this Fall.
Can any of you roller guys tell me the good/bad/ugly about the Remington 1-1/2 frame? I know they were made for lighter calibers. The one I'm looking at has a 28" barrel in 44-40 - bore is fair, but the hammer spur appears to be broken off. Any idea on a fair price?
20g Miroku Field grade over/under with 28" barrels - hopefully will be death for grouse this Fall.
Can any of you roller guys tell me the good/bad/ugly about the Remington 1-1/2 frame? I know they were made for lighter calibers. The one I'm looking at has a 28" barrel in 44-40 - bore is fair, but the hammer spur appears to be broken off. Any idea on a fair price?
- Griff
- Posting leader...
- Posts: 20864
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: OT - New old roller arrived today...
I sure don't, but maybe the guys over @ Single Shot dot com can help. Nice roller hogleg!
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- Ysabel Kid
- Moderator
- Posts: 27899
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: OT - New old roller arrived today...
JReed wrote:Way cool. I cant wait for the range report. Do you have a roller rifle to go with it?
+1
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: OT - New old roller arrived today...
Very cool!
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at