Winchester 1886

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
Hombre
Levergunner 2.0
Posts: 104
Joined: Fri Dec 26, 2008 8:00 am

Winchester 1886

Post by Hombre »

Image

Image

Hello,
I am trying for the first time to post pictures in this forum. I really hope I don´t make a mess of everything.
Picture 1. Winchester Mod. 1886. Caliber 45-90. Mfg 1909.
Picture 2. Winchester Mod. 1886. Caliber 45-90. Octagonal. Mfg 1890.
Maybe a stupid question but what is the big difference if you compare the mod. 86 with the Mod 71? I am asking because I have never seen a Mod 71 in real.
Best regards,
Hombre
Pepe Ray
Levergunner 2.0
Posts: 160
Joined: Thu Sep 06, 2007 11:22 am
Location: Piscataquis River, so. bank

Re: Winchester 1886

Post by Pepe Ray »

A model #71 is a model#86 that's been "tucked and rolled".
Jesus is the way.
User avatar
Buck Elliott
Member Emeritus
Posts: 2830
Joined: Mon Sep 10, 2007 12:15 pm
Location: Halfway up Sheep Mountain -- Cody, Wyoming

Re: Winchester 1886

Post by Buck Elliott »

Think of the 71 as a Model '86 Extra Light with a pistol-grip stock. The Rifle has a 24" barrel; the Carbine sports a 22" tube. Chambered in .348 Winchester only...
Regards

Buck

Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
71fan
Levergunner 3.0
Posts: 644
Joined: Fri Apr 06, 2007 4:44 pm
Location: San Diego

Re: Winchester 1886

Post by 71fan »

Nice rifles! I have a similar half octagon button mag in 45-70, except with a rifle butt, from 1888. The half-round button mags are my favorite configuration.

Onto the 71s....first, the short rifles were 20 inches :wink:

The stock was a redesigned NRA-style, with a revised comb and drop in the butt, a rounder comb, and a wider and deeper butt plate. The forearm was beefed up a bit too, being a bit thicker and rounder than the 1886 forearms.

These two articles from the main page are must-reads. The second article has a detailed section discussing the differences:
http://leverguns.com/articles/taylor/model71.htm
http://leverguns.com/articles/model71_info.htm
Chad
User avatar
Mike D.
***Rock Star***
Posts: 4234
Joined: Sun Apr 01, 2007 4:56 pm
Location: Northern CA

Re: Winchester 1886

Post by Mike D. »

The 71 also has very slightly angled locking lugs and a coil mainspring. Those are the only real differences between the '86 and 71. Winchester Proof Steel was used on the 71 barrels, as well as on some late 1886s. All of the 1886 lightweight and extra lightweight rifles had "Nickel Steel" barrels, which had a strength rating of 100,000 PSI+. I'm not sure what the "Proof Steel" barrels are rated at, but they were less costly to manufacture.
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
User avatar
Old Shatterhand
Levergunner 2.0
Posts: 292
Joined: Thu Sep 13, 2007 3:52 pm
Location: Nericia, Sweden

Re: Winchester 1886

Post by Old Shatterhand »

You should show the rest of your nice gun pictures here! They are indeed wort seeing. :wink:

Old Sh.
Winchester model 88 .308 WCF
Winchester model 71 .348 WCF
Pete44ru
Advanced Levergunner
Posts: 11242
Joined: Sun Sep 02, 2007 7:26 am

Re: Winchester 1886

Post by Pete44ru »

That 1890, half-octagon/button mag '86 is surely my favorite - both are very nice, indeed !

Besides what Mike posted above, the Model 71 only came in a single caliber, .348 Winchester, and in a single stock config, a pistol-grip - but there were uncheckered plain-jane Standard's and fancier, checkered Deluxe's to be had in the original Winchester's.
Like most fancier Brownings of both '86 & '71, the Miroku deluxe clones had pickled/silvered receivers with engraving/inlays/etc.

.
User avatar
Tycer
Advanced Levergunner
Posts: 7702
Joined: Sun Sep 02, 2007 10:17 am
Location: Asheville, NC

Re: Winchester 1886

Post by Tycer »

Pretty!!!!
Kind regards,
Tycer
----------------------------------------------------------------
http://www.saf.org - https://peakprosperity.com/ - http://www.guntalk.com
User avatar
Borregos
Advanced Levergunner
Posts: 4756
Joined: Thu Sep 13, 2007 7:40 am
Location: Ontario, Canada

Re: Winchester 1886

Post by Borregos »

Very nice :!: :mrgreen:
Pete
Sometimes I wonder if it is worthwhile gnawing through the leather straps to get up in the morning..................
Hombre
Levergunner 2.0
Posts: 104
Joined: Fri Dec 26, 2008 8:00 am

Re: Winchester 1886

Post by Hombre »

Thank you very much all of you for your kind words and for the information. I really appreciate it!
Best regards,
Hombre
User avatar
marlinman93
Advanced Levergunner
Posts: 6483
Joined: Sun Apr 01, 2007 3:40 pm
Location: Oregon

Re: Winchester 1886

Post by marlinman93 »

Hombre seems to find more nice old American arms over there than most of us do here! That 1886 is another fine example!-Vall
Pre WWI Marlins and Singleshot rifles!
http://members.tripod.com/~OregonArmsCollectors/
Post Reply