Anybody missing a set screw?

Welcome to the Leverguns.Com Forum. This is a high-class place so act respectable. We discuss most anything here ... politely.

Moderators: AmBraCol, Hobie

Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.

Please post political post in the new Politics forum.
Post Reply
User avatar
Old Ironsights
Posting leader...
Posts: 15084
Joined: Mon Apr 02, 2007 9:27 am
Location: Waiting for the Collapse
Contact:
Contact Old Ironsights

Anybody missing a set screw?

Post by Old Ironsights »

When I was cleaning the range I found a tiny set screw on the platform right near where I had the tripod set up for the photo.

Doesn't go in any of my guns (so far as I can tell). I'll get a pic tonight...
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Top
User avatar
Jayhawker
Levergunner 2.0
Posts: 313
Joined: Mon Sep 03, 2007 4:47 pm
Location: Missouri

Re: Anybody missing a set screw?

Post by Jayhawker »

Let me know which size it is and I'll let you know if it's mine. :lol:
Well done is better than well said.
Top
User avatar
JReed
Advanced Levergunner
Posts: 5509
Joined: Tue Apr 03, 2007 11:17 am
Location: SoCal

Re: Anybody missing a set screw?

Post by JReed »

I had some of my guns there I will look tonight and let you know. Your friend Jeremy was shooting from there also might bee one of his.
Jeremy
GySgt USMC Ret

To err is human, To forgive is devine, Neither of which is Marine Corps policy
Semper Fidelis
Top
awp101
Advanced Levergunner
Posts: 5670
Joined: Mon Apr 09, 2007 7:13 pm
Location: DeeDee Snavely's Used Guns and Weapons

Re: Anybody missing a set screw?

Post by awp101 »

If I had been there I would claim it. I've had a screw loose for years...
Nothing so needs reforming as other people's habits.
-Mark Twain

Proverbs 3:5; Philippians 4:13

Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
Top
User avatar
El Chivo
Advanced Levergunner
Posts: 3612
Joined: Mon Sep 03, 2007 5:12 pm
Location: Red River Gorge Area

Re: Anybody missing a set screw?

Post by El Chivo »

you are one Good Samaritan to go to so much trouble to find the rightful owner. I only hope he/she appreciates it when you locate them.
"I'll tell you what living is. You get up when you feel like it. You fry yourself some eggs. You see what kind of a day it is."
Top
User avatar
J Miller
Member Emeritus
Posts: 14885
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Anybody missing a set screw?

Post by J Miller »

OI,

It's not mine. I checked all my shooters and all parts and pieces are present and accounted for.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Top
Mokwaw
Levergunner 3.0
Posts: 536
Joined: Sat Sep 22, 2007 3:08 pm
Location: Huntington, Indiana

Re: Anybody missing a set screw?

Post by Mokwaw »

I didn't loose one there this time, but I did back at the November shoot. It was round head with allen wrench socket and small plastic washer. Came out of the scope mount for my SKS. No big deal, I pulled the scope off, and after shooting this past Sunday with the irons, I don't plan on putting the scope back on.
UNITE
Top
User avatar
Old Ironsights
Posting leader...
Posts: 15084
Joined: Mon Apr 02, 2007 9:27 am
Location: Waiting for the Collapse
Contact:
Contact Old Ironsights

Re: Anybody missing a set screw?

Post by Old Ironsights »

From November... Hmmm... sorry. Don't thik the fingers were working that well then...

Here's the pics. Dia is .1345".

Image
Image

Not sure what it could be off of.... But I'm pretty certain it wasn't there before the shoot.
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Top
User avatar
J Miller
Member Emeritus
Posts: 14885
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Anybody missing a set screw?

Post by J Miller »

OI,

It looks like the screw my Redding #3 powder measure uses to keep the plastic hopper in.
That screw measures; .1358" x .241".

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Top
User avatar
Old Ironsights
Posting leader...
Posts: 15084
Joined: Mon Apr 02, 2007 9:27 am
Location: Waiting for the Collapse
Contact:
Contact Old Ironsights

Re: Anybody missing a set screw?

Post by Old Ironsights »

J Miller wrote:OI,

It looks like the screw my Redding #3 powder measure uses to keep the plastic hopper in.
That screw measures; .1358" x .241".

Joe
Well... did you have that out there? Lemme know...
C2N14... because life is not energetic enough.
מנא, מנא, תקל, ופרסין Daniel 5:25-28... Got 7.62?
Not Depressed enough yet? Go read National Geographic, July 1976
Gott und Gewehr mit uns!
Top
User avatar
J Miller
Member Emeritus
Posts: 14885
Joined: Sat Mar 31, 2007 7:46 pm
Location: Not in IL no more ... :)

Re: Anybody missing a set screw?

Post by J Miller »

Old Ironsights wrote:
J Miller wrote:OI,

It looks like the screw my Redding #3 powder measure uses to keep the plastic hopper in.
That screw measures; .1358" x .241".

Joe
Well... did you have that out there? Lemme know...
Nope, it's still on the loading bench where I left it. Isn't mine.

Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts ;) .***
Top
User avatar
2ndovc
Advanced Levergunner
Posts: 9362
Joined: Fri Sep 07, 2007 11:59 am
Location: OH, South Shore of Lake Erie

Re: Anybody missing a set screw?

Post by 2ndovc »

awp101 wrote:If I had been there I would claim it. I've had a screw loose for years...

As IF we didn't know that already!! :D

8)
jasonB " Another Dirty Yankee"


" Tomorrow the sun will rise. Who knows what the tide could bring?"
Top
Post Reply

Return to “General Discussion”