I now have almost everything I need to make my first batch of 12 ga sabot slugs. Ballistic products offers a plastic sabot designed to hold a .50 cal pistol bullet of the 350 or 500 grain persuasion. They recommend using only new fiocchi hulls and since the 2.75 inch hulls are on backorder until the cows come home, I ordered in 3" hulls. I have some 500 grain hornady pistol bullets and I'm now just waiting on the powder.
Here's the catch. BPI's starting data gives these things a MV of 2300 f/s I can probably back off the charge an additional 10%, but still . . .
But hey, I already dislocated the left shoulder, why not make the right one match
OT-Home made sabot slugs-YIKES!!
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Senior Levergunner
- Posts: 1020
- Joined: Mon Sep 17, 2007 3:50 pm
- Location: Vermont, USA
- Contact:
OT-Home made sabot slugs-YIKES!!
My first attempt at an outdoors website: http://www.diyballistics.com
Re: OT-Home made sabot slugs-YIKES!!
That ought to be fun in a lightweight H&R single shot! 500 gr. slug at 2300 fps is more umph that a lot of the big Nitro Express rounds.
NRA Life Member
-
- Senior Levergunner
- Posts: 1020
- Joined: Mon Sep 17, 2007 3:50 pm
- Location: Vermont, USA
- Contact:
Re: OT-Home made sabot slugs-YIKES!!
Quite frankly, I'm a bit frightened. But my curiosity is outweighing my fear.
My first attempt at an outdoors website: http://www.diyballistics.com
Re: OT-Home made sabot slugs-YIKES!!
Maybe you could have a friend shoot it first. tell them you want to get some really good pictures of the moment of ignition with your handy cam so you can post it on an online recoil study.
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Re: OT-Home made sabot slugs-YIKES!!
very funny Rusty and very well put
-
- Advanced Levergunner
- Posts: 5670
- Joined: Mon Apr 09, 2007 7:13 pm
- Location: DeeDee Snavely's Used Guns and Weapons
Re: OT-Home made sabot slugs-YIKES!!
That's just mean, evil, nasty, sneaky and cruel. I like the way you think...Rusty wrote:Maybe you could have a friend shoot it first. tell them you want to get some really good pictures of the moment of ignition with your handy cam so you can post it on an online recoil study.
Nothing so needs reforming as other people's habits.
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-Mark Twain
Proverbs 3:5; Philippians 4:13
Got to have a Jones for this
Jones for that
This running with the Joneses boy
Just ain't where it's at
-
- Member Emeritus
- Posts: 455
- Joined: Sun Sep 09, 2007 5:29 pm
- Location: Mountains of West Virginia
Re: OT-Home made sabot slugs-YIKES!!
Jason,
I hope you enjoy your balistic experiment!! There's a small but enthusiastic group who are doing some really interesting things with the 12 guage these days.....for your enjoyment!
http://shootersforum.com/showthread.htm?t=26647&page=16
"........Here's picture of solid turned 12ga slugs that Rob makes.
They are flat on one end and hollowpoint on other.
They can be shot either direction. Aluminum ones
are 346gr, brass 1080gr........If you need any
contact him. He, RIP, and others on AR are testing
them with different powders. I have gotten similiar brass
ones to 1900 fps in NEF with RMC case, with
140 gr the new RL-17. Ed ......"
I hope you enjoy your balistic experiment!! There's a small but enthusiastic group who are doing some really interesting things with the 12 guage these days.....for your enjoyment!
http://shootersforum.com/showthread.htm?t=26647&page=16
"........Here's picture of solid turned 12ga slugs that Rob makes.
They are flat on one end and hollowpoint on other.
They can be shot either direction. Aluminum ones
are 346gr, brass 1080gr........If you need any
contact him. He, RIP, and others on AR are testing
them with different powders. I have gotten similiar brass
ones to 1900 fps in NEF with RMC case, with
140 gr the new RL-17. Ed ......"
Lobo in West Virginia
Old List Veteran..Five Years..Five Hundred Posts
Old List Veteran..Five Years..Five Hundred Posts
- AJMD429
- Posting leader...
- Posts: 32195
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: OT-Home made sabot slugs-YIKES!!
Sometime I want to load up saboted cartridges, like the "accelerator" ones commercially sold for .308 and .30-06 and .30-30, only maybe for .45-70, .444 Marlin, or .500 S&W. Can't find the proper sabots or load data though... kind'a hampers things, huh?
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
Re: OT-Home made sabot slugs-YIKES!!
Maybe you could try some of that hot glue gun glue?
If you're gonna be stupid ya gotta be tough-
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.
Isiah 55:8&9
It's easier to fool people than it is to convince them they have been fooled.