32/20: Which bore diameter
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
32/20: Which bore diameter
Have way too much time to think last 2 days. Would you rather have a 32/20 with a .308 or .312 bore diameter? Dont be shy about voiceing your opinions on which one you would choose
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
Re: 32/20: Which bore diameter
.312
Sincerely,
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
Hobie
"We are all travelers in the wilderness of this world, and the best that we find in our travels is an honest friend." Robert Louis Stevenson
-
- Advanced Levergunner
- Posts: 4428
- Joined: Wed Sep 12, 2007 12:33 pm
- Location: Wyoming and Arizona
Re: 32/20: Which bore diameter
.312. If you get the other, you will have to have a VERY expensive set of dies made for it.
What possible advantage would you have in making the cartridge something other than .312?
What possible advantage would you have in making the cartridge something other than .312?
Re: 32/20: Which bore diameter
.308? That would be a .30-20, wouldn't it?
"Congressmen who willfully take actions during wartime that damage morale, and undermine the military are saboteurs and should be arrested, exiled or hanged"....President Abraham Lincoln
Re: 32/20: Which bore diameter
.312 gives you a better selection of bullets, unless your shooting a Thompson center then 308 wouldn't be bad because you could use pointy bullets. Even cast ( Ranch dog offers a 313 , 115 gr GC ) Marlins and Rugers bores are 312. Except for the combo blackhawk 30 carbine/32-20 .
Are you still interested in my 25-20 ammo?
Are you still interested in my 25-20 ammo?
- KirkD
- Desktop Artiste
- Posts: 4406
- Joined: Sat Apr 07, 2007 6:52 am
- Location: Central Ontario, Canada
- Contact:
Re: 32/20: Which bore diameter
.312 is what I would prefer, if for no other reason that it is the true blue, original bullet diameter, and I'm Old School.
Kirk: An old geezer who loves the smell of freshly turned earth, old cedar rail fences, wood smoke, a crackling fireplace on a snowy evening, pristine wilderness lakes, the scent of
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
cedars and a magnificent Whitetail buck framed in the semi-buckhorn sights of a 120-year old Winchester.
Blog: https://www.kirkdurston.com/
- Sixgun
- Posting leader...
- Posts: 18747
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: 32/20: Which bore diameter
You can't rewrite history. I like the old guns. They are all .311-.313. It don't leave me with a choice. Size right and shoot! ----------------Sixgun
-
- Advanced Levergunner
- Posts: 5493
- Joined: Mon Apr 02, 2007 9:23 pm
- Location: Batesville,Arkansas
Re: 32/20: Which bore diameter
My 1917 Winchester 1892 24 inch rifle mics out at .312, there are a lot of very good bullets to choose from.
JerryB II Corinthians 3:17, Now the Lord is that Spirit: and where the Spirit of the Lord is, there is liberty.
JOSHUA 24:15
JOSHUA 24:15
-
- Levergunner 2.0
- Posts: 477
- Joined: Fri Sep 21, 2007 11:25 am
- Location: NE Ohio
Re: 32/20: Which bore diameter
The funny thing is, when I was going to reline a 32-20 a few years ago (the bore was absolutely a sewer pipe) I found all the liners for 32-20 were .308!! Are new 32-20's .308 or .312? I wanted .312 and actually with a lot of experimenting got a load to shoot in that sewer pipe 1873.
So, to answer your question, I would stick with .312 if i could.
So, to answer your question, I would stick with .312 if i could.
"...for there is a cloud on my horizon...and its name is progress." E. Abbey, 1958
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: 32/20: Which bore diameter
Ben i am, but i have been so busy that i barely get time to shoot. I'm off until tomorow at 1700 and I am going to camp at the range in Holmen. so I can at least keep my finger in shape.BenT wrote:.312 gives you a better selection of bullets, unless your shooting a Thompson center then 308 wouldn't be bad because you could use pointy bullets. Even cast ( Ranch dog offers a 313 , 115 gr GC ) Marlins and Rugers bores are 312. Except for the combo blackhawk 30 carbine/32-20 .
Are you still interested in my 25-20 ammo?
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!