Does anyone know where I might find a standard length Upper Tang Screw for a Rossi 92? I have looked at Brownells and Buffalo Arms and cannot find one. The only ones that I have seen are the ones for the tang sites that are a little longer than standard.
Thanks,
RustyJr
Part for Rossi 92
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Part for Rossi 92
Life is a storm, my young friend. You will bask in the sunlight one moment, be shattered on the rocks the next. What makes you a man is what you do when that storm comes.
- Griff
- Posting leader...
- Posts: 20876
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Part for Rossi 92
Contact Nate Kiowa Jones (Steve) @ Steve's Guns.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
Re: Part for Rossi 92
Long time Rossi warranty repair center M&M Gunsmithing http://www.mmgunsmithing.com or our own Steve Young aka Nate Kiowa Jones http://www.stevesgunz.com
Re: Part for Rossi 92
Anyone know what the threads are on this particular screw?
deafrn
"I wasn't ignoring you, I just couldn't hear you. Okay, NOW I'm ignoring you."
"I wasn't ignoring you, I just couldn't hear you. Okay, NOW I'm ignoring you."
-
- Levergunner 2.0
- Posts: 214
- Joined: Tue Nov 18, 2008 7:21 pm
Re: Part for Rossi 92
5x8x38 all metric. just been there ordered mine from rossi.
- AJMD429
- Posting leader...
- Posts: 32263
- Joined: Sun Sep 09, 2007 10:03 am
- Location: Hoosierland
- Contact:
Re: Part for Rossi 92
Before I got Rossi's phone number I made do with a black hex-head metric machine screw from Ace hardware. Worked fine, and happened to provide a nice resting place for the tang sight (the little rim around the edge of the aperture just cupped over the head of the screw). Got a 'real' one later.two bit okie wrote:5x8x38 all metric. just been there ordered mine from rossi.
Doctors for Sensible Gun Laws
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "
"first do no harm" - gun control LAWS lead to far more deaths than 'easy access' ever could.
Want REAL change? . . . . . "Boortz/Nugent in 2012 . . . ! "