paging Mescalero and others re: the 5.7 Johnson
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
paging Mescalero and others re: the 5.7 Johnson
also called 22 spitfire , the necked down 30 carbine. i have long been interested in this, and just snagged an israeli made one
Israel Arms Intl M888,for cheap enough [ 325$ ] to play with one.
what i need to know is how to get brass the easiest way possible? do you have recommendations on the forming dies, etc. i have looked and found dies from CH4D and others , but not sure which is best and easiest to use.
thanks
Israel Arms Intl M888,for cheap enough [ 325$ ] to play with one.
what i need to know is how to get brass the easiest way possible? do you have recommendations on the forming dies, etc. i have looked and found dies from CH4D and others , but not sure which is best and easiest to use.
thanks
cable
-
- Levergunner
- Posts: 32
- Joined: Fri Sep 07, 2012 5:22 pm
Re: paging Mescalero and others re: the 5.7 Johnson
order some .30 carbine brass
Re: paging Mescalero and others re: the 5.7 Johnson
I have the die set.
I can send it to you to use, you must make brass and send it back.
They were expensive when I got them years ago, I can well imagine what they are now.
I look forward to the report, I am a big fan of the caliber.
I can send it to you to use, you must make brass and send it back.
They were expensive when I got them years ago, I can well imagine what they are now.
I look forward to the report, I am a big fan of the caliber.
Re: paging Mescalero and others re: the 5.7 Johnson
I like that rail,
Want 50 rounds of brass to get started with?
Give them back to me when you get set up?
Want 50 rounds of brass to get started with?
Give them back to me when you get set up?
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: paging Mescalero and others re: the 5.7 Johnson
Mescalero wrote:I like that rail,
Want 50 rounds of brass to get started with?
Give them back to me when you get set up?
you bet ! but no rush, winter is here for a while yet , up here.
cable
Re: paging Mescalero and others re: the 5.7 Johnson
You are going to have so MUCH fun.
PM me your snail mail.
PM me your snail mail.
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: paging Mescalero and others re: the 5.7 Johnson
Mescalero wrote:You are going to have so MUCH fun.
PM me your snail mail.
will do! thanks : )
cable
-
- Levergunner 2.0
- Posts: 190
- Joined: Mon Dec 02, 2013 11:45 am
Re: paging Mescalero and others re: the 5.7 Johnson
I am so sorry. Just recently I gave a fellow about 250 rd. of brass and loaded ammo for the 5.7mm Johnson Spitfire.
Re: paging Mescalero and others re: the 5.7 Johnson
I don't know anything about this caliber other than what I have read on here. Hey Mescalero, how accurate is it?
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: paging Mescalero and others re: the 5.7 Johnson
carbluesnake wrote:I am so sorry. Just recently I gave a fellow about 250 rd. of brass and loaded ammo for the 5.7mm Johnson Spitfire.
dang! that would have been handy. i hope he has a rifle to use !
cable
Re: paging Mescalero and others re: the 5.7 Johnson
Really nice, better than I can shoot.
-
- Levergunner 2.0
- Posts: 238
- Joined: Sat Sep 08, 2007 2:47 pm
- Location: Tidewater VA
Re: paging Mescalero and others re: the 5.7 Johnson
Gee I had one of the old models years ago, used to use it to jump shoot jacks on the farm, was great fun, mite be worth looking into that again, nice find
Re: paging Mescalero and others re: the 5.7 Johnson
Mecalero,
The rail is an Ultimak M6-B. I have the same rail and the Choate stock on my Inland. With an Aimoint Micro and a Surefire in an offset mount it is a vicious little rig.
hfcable,
Sorry to jump in on you. I got all excited to see a carbine set up like mine.
I will be interested to see how the 5.7 works. Keep us posted.
The rail is an Ultimak M6-B. I have the same rail and the Choate stock on my Inland. With an Aimoint Micro and a Surefire in an offset mount it is a vicious little rig.
hfcable,
Sorry to jump in on you. I got all excited to see a carbine set up like mine.
I will be interested to see how the 5.7 works. Keep us posted.
"Oh bother", said Pooh, as he chambered another round.
Re: paging Mescalero and others re: the 5.7 Johnson
I must admit that I am becoming curious about this caliber. I will keep my eyes open at the gun shows and such, but it sounds as if it is rare.
D. Brian Casady
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Quid Llatine Dictum Sit, Altum Viditur.
Advanced is being able to do the basics while your leg is on fire---Bill Jeans
Don't ever take a fence down until you know why it was put up---Robert Frost
Re: paging Mescalero and others re: the 5.7 Johnson
I made mine.
Re: paging Mescalero and others re: the 5.7 Johnson
HF
The brass is on it's way.
You need to trim to length, de-prime, tumble to clean it up.
The brass is on it's way.
You need to trim to length, de-prime, tumble to clean it up.
-
- Advanced Levergunner
- Posts: 2450
- Joined: Tue Sep 04, 2007 1:24 pm
- Location: wasilla, alaska and bozeman, montana
Re: paging Mescalero and others re: the 5.7 Johnson
wonderful ! thanks so muchMescalero wrote:HF
The brass is on it's way.
You need to trim to length, de-prime, tumble to clean it up.
cable