I just KNOW this is the place to get help with this...
Per This Old Link (click here), a few years back we gifted a Rossi 92 38/357 to my daughter's then boyfriend -- now her husband --and as he's been so busy with work, he asked me to clean it for him since I wasn't traveling this week.
Having worked on Winchester 92's several times before, I felt quite comfortable taking it all apart -- and each time I always marvel at the genius of John Browning who designed it from a block of steel and a slab of wood -- so now it's all cleaned, from the chamber end, and put back together correctly. No missing parts!
However, I've noticed a couple of things that I want to get some feedback on...
Please see the image pasted below, which wasn't mine originally, but I modified it for this posting. You can ignore the text and anything in green or red, it's only the 2 dashed arrows that concern me.
The issue is the lever doesn't seem to "lock up" like I'm thinking it should. Everything else functions just fine, and as I said, nothing's missing, but the lever stills feels loose and sloppy...
* Per the blue arrow on the image, the Friction Stud doesn't seem to be engaging enough of the lower tang -- can that stud be easily lengthened? Or is it not an issue, as long as your fingers are wrapped around the lever/stock as they should be?
* Per the gold arrow on the image, there is an empty hole drilled into the front of this one's lever (not visible when the action is closed) -- but I've checked several sources online and "huh", I don't see any springs or pins for that hole on any of the Rossi 92 schematics I've looked at -- got any thoughts on this?
My son-in-law really enjoys shooting this fun little carbine at the range -- against my Marlin 1894. (Gee, maybe that's why the Rossi lever feels "sloppy" to me?) But having said that, I have to admit, the Winchester 92 design and that sweet little Rossi do have a really slick lever!
Thanks for any help or ideas with this!
Tight groups.
Old No7
Help Needed -- "Rossi 92" Lever Lockup
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Help Needed -- "Rossi 92" Lever Lockup
You do not have the required permissions to view the files attached to this post.
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
- Griff
- Posting leader...
- Posts: 20876
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Help Needed -- "Rossi 92" Lever Lockup
The gold arrow points to the hole for the bolt/lever pin, with the stop screw holding it in place. The stop screw is the one furthermost forward on the upper left side:
The friction stud hould just barely engage the receiver, holding the lever against the lower tang. As long as the locking lugs are all the way up and the bolt fully forward, it should be in battery.
The friction stud hould just barely engage the receiver, holding the lever against the lower tang. As long as the locking lugs are all the way up and the bolt fully forward, it should be in battery.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
-
- Site Sponsor
- Posts: 2507
- Joined: Fri Sep 07, 2007 12:05 pm
- Location: Lampasas, Texas
- Contact:
Re: Help Needed -- "Rossi 92" Lever Lockup
Griff,
I think he is referring to the hole in the lever not the lever to bolt pin. I think this hole is drilled in the lever so the friction stud can be driven out if it is bound up, as in rusty.
As Griff mentioned the friction stud should engage the lower tang just enough to hold the lever in the up position. If the friction stud does not reach you can sometimes lengthen the notch in the friction stud to it will reach. However, I have had to make new longer friction studs, too.
I think he is referring to the hole in the lever not the lever to bolt pin. I think this hole is drilled in the lever so the friction stud can be driven out if it is bound up, as in rusty.
As Griff mentioned the friction stud should engage the lower tang just enough to hold the lever in the up position. If the friction stud does not reach you can sometimes lengthen the notch in the friction stud to it will reach. However, I have had to make new longer friction studs, too.
Steve Young aka Nate Kiowa Jones Sass# 6765
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Steve's Guns aka "Rossi 92 Specialists"
205 Antler lane
Lampasas, Texas 76550
http://www.stevesgunz.com
Email; steve@stevesgunz.com
Tel: 512-564-1015
Re: Help Needed -- "Rossi 92" Lever Lockup
Thanks guys!
I'll give that a "shot".
Old No7
I'll give that a "shot".
Old No7
"Freedom and the Second Amendment... One cannot exist without the other." © 2000 DTH
- Griff
- Posting leader...
- Posts: 20876
- Joined: Sat Mar 31, 2007 4:56 pm
- Location: OH MY GAWD they installed a STOP light!!!
Re: Help Needed -- "Rossi 92" Lever Lockup
Oh SNAP... The arrow IS pointing that way, too!Nate Kiowa Jones wrote:Griff,
I think he is referring to the hole in the lever not the lever to bolt pin. I think this hole is drilled in the lever so the friction stud can be driven out if it is bound up, as in rusty.
Griff,
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
SASS/CMSA #93
NRA Patron
GUSA #93
There is a fine line between hobby & obsession!
AND... I'm over it!!
No I ain't ready, but let's do it anyway!
- Buck Elliott
- Member Emeritus
- Posts: 2830
- Joined: Mon Sep 10, 2007 12:15 pm
- Location: Halfway up Sheep Mountain -- Cody, Wyoming
Re: Help Needed -- "Rossi 92" Lever Lockup
NKJ nailed it - as usual...
Regards
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...
Buck
Life has a way of making the foreseeable that which never happens, and the unforeseeable, that which your life becomes...