1876 .. 45-75 or .45-60?
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
1876 .. 45-75 or .45-60?
As I’m getting my act together to load up stuff for the new 86 I got to looking at the Uberti 1876
And it’s winter and I’m bored and have a spot in the
Cabinet
If you had the choice would you go with 45-75
Or 45-60? Thanks for any help deciding!!
And it’s winter and I’m bored and have a spot in the
Cabinet
If you had the choice would you go with 45-75
Or 45-60? Thanks for any help deciding!!
Fords..Shelbys..John Deeres..Winchesters..Colt..S&W and O scale RR’er
Re: 1876 .. 45-75 or .45-60?
.45-75. It's the original cartridge for that rifle. You could load it down to .45-60 level, but not the other way around.
Have you hugged your rifle today?
Re: 1876 .. 45-75 or .45-60?
This will be just a shooter I’m not hunting with it
A Toy I guess
The 45-75 does seem a bit .. cooler lol
Fords..Shelbys..John Deeres..Winchesters..Colt..S&W and O scale RR’er
-
- Advanced Levergunner
- Posts: 4145
- Joined: Fri Dec 21, 2007 11:34 am
- Location: north of Palacios about 1400 miles
Re: 1876 .. 45-75 or .45-60?
45/75 is a cooler looking cartridge, I would go with that. Todd/3leg
30/30 Winchester: Not accurate enough fer varmints, barely adequate for small deer; BUT In a 10" to 14" barrelled pistol; is good for moose/elk to 200 yards; ground squirrels to 300 metres
250 Savage... its what the 223 wishes it could be...!
250 Savage... its what the 223 wishes it could be...!
Re: 1876 .. 45-75 or .45-60?
Depending on how handy you are at making brass. 45/60 is easy as cutting down 45/70 brass. 45/75 is more difficult, reforming already hard to find 348 brass. Pick your lesser of 2 evils. I have a 45/75 and got a couple hundred brass from Jamison before they quit.
- Sixgun
- Posting leader...
- Posts: 18748
- Joined: Sun Sep 16, 2007 7:17 pm
- Location: S.E. Pa. Where The Finest Winchesters & Colts Reside
Re: 1876 .. 45-75 or .45-60?
Yep. Those are my thoughts....as for performance there's little difference, in fact no difference with smokeless.veeman wrote: ↑Wed Mar 14, 2018 2:16 pm Depending on how handy you are at making brass. 45/60 is easy as cutting down 45/70 brass. 45/75 is more difficult, reforming already hard to find 348 brass. Pick your lesser of 2 evils. I have a 45/75 and got a couple hundred brass from Jamison before they quit.
I hate expensive brass. If your not framiliar with case forming, the 45-75 can be problematic and you will screw up a mess of expensive and hard to get 348 brass before you get it right. Probably why I use 30-30 brass for 7 different calibers.----6
Re: 1876 .. 45-75 or .45-60?
I have both the 45-75 and the 45-60. I can tell you from experience, the 45-60 is the way to go. It is easy to get or make brass and will work in the rifle with less trouble than the 45-75.
Of course, I am shooting originals, but getting the 45-75 to even chamber was a process of inside neck reaming and a lot of work to get it to both feed from the magazine and shoot. Brass isn't the easiest to come by for the 45-75, so unless you would rather tinker than shoot, get the 45-60.
Of course, I am shooting originals, but getting the 45-75 to even chamber was a process of inside neck reaming and a lot of work to get it to both feed from the magazine and shoot. Brass isn't the easiest to come by for the 45-75, so unless you would rather tinker than shoot, get the 45-60.
Re: 1876 .. 45-75 or .45-60?
Thanks Sharpnel ..i think ill do that..i spent lots of time...still am on making 38-72 for a 95 i have...its fun and all but gets tediousShrapnel wrote: ↑Wed Mar 14, 2018 4:50 pm I have both the 45-75 and the 45-60. I can tell you from experience, the 45-60 is the way to go. It is easy to get or make brass and will work in the rifle with less trouble than the 45-75.
Of course, I am shooting originals, but getting the 45-75 to even chamber was a process of inside neck reaming and a lot of work to get it to both feed from the magazine and shoot. Brass isn't the easiest to come by for the 45-75, so unless you would rather tinker than shoot, get the 45-60.
Fords..Shelbys..John Deeres..Winchesters..Colt..S&W and O scale RR’er
-
- Advanced Levergunner
- Posts: 6972
- Joined: Tue Apr 03, 2007 8:52 pm
- Location: Ridgefield WA. USA
Re: 1876 .. 45-75 or .45-60?
Mine is a .50-95 .
Re: 1876 .. 45-75 or .45-60?
Another good choice. I have a 40-72 in an 1895, it is a hoot as well...snkbittin wrote: ↑Wed Mar 14, 2018 6:45 pmThanks Sharpnel ..i think ill do that..i spent lots of time...still am on making 38-72 for a 95 i have...its fun and all but gets tediousShrapnel wrote: ↑Wed Mar 14, 2018 4:50 pm I have both the 45-75 and the 45-60. I can tell you from experience, the 45-60 is the way to go. It is easy to get or make brass and will work in the rifle with less trouble than the 45-75.
Of course, I am shooting originals, but getting the 45-75 to even chamber was a process of inside neck reaming and a lot of work to get it to both feed from the magazine and shoot. Brass isn't the easiest to come by for the 45-75, so unless you would rather tinker than shoot, get the 45-60.
Re: 1876 .. 45-75 or .45-60?
Yes if I were to acquire one I think it would have to be the 50-95 !
Had an original 50-95 in my hands 14 or 15 years ago . It woulda come home with me except for one small reason ! I didn't have enough jingle in my pocket to get it away from the owner
Parkers , Mannlicher Schoenauer’s , 6.5mm's and my family in the Philippines !
Re: 1876 .. 45-75 or .45-60?
Shrapnel I have a Flatside in 40-72.. my very favorite lever gun and Cal.Shrapnel wrote: ↑Wed Mar 14, 2018 8:47 pmAnother good choice. I have a 40-72 in an 1895, it is a hoot as well...snkbittin wrote: ↑Wed Mar 14, 2018 6:45 pmThanks Sharpnel ..i think ill do that..i spent lots of time...still am on making 38-72 for a 95 i have...its fun and all but gets tediousShrapnel wrote: ↑Wed Mar 14, 2018 4:50 pm I have both the 45-75 and the 45-60. I can tell you from experience, the 45-60 is the way to go. It is easy to get or make brass and will work in the rifle with less trouble than the 45-75.
Of course, I am shooting originals, but getting the 45-75 to even chamber was a process of inside neck reaming and a lot of work to get it to both feed from the magazine and shoot. Brass isn't the easiest to come by for the 45-75, so unless you would rather tinker than shoot, get the 45-60.
Fords..Shelbys..John Deeres..Winchesters..Colt..S&W and O scale RR’er
- Ysabel Kid
- Moderator
- Posts: 27918
- Joined: Mon Sep 17, 2007 7:10 pm
- Location: South Carolina, USA
- Contact:
Re: 1876 .. 45-75 or .45-60?
Nothing like the versatile 40-72..snkbittin wrote: ↑Thu Mar 15, 2018 8:39 amShrapnel I have a Flatside in 40-72.. my very favorite lever gun and Cal.Shrapnel wrote: ↑Wed Mar 14, 2018 8:47 pmAnother good choice. I have a 40-72 in an 1895, it is a hoot as well...snkbittin wrote: ↑Wed Mar 14, 2018 6:45 pmThanks Sharpnel ..i think ill do that..i spent lots of time...still am on making 38-72 for a 95 i have...its fun and all but gets tediousShrapnel wrote: ↑Wed Mar 14, 2018 4:50 pm I have both the 45-75 and the 45-60. I can tell you from experience, the 45-60 is the way to go. It is easy to get or make brass and will work in the rifle with less trouble than the 45-75.
Of course, I am shooting originals, but getting the 45-75 to even chamber was a process of inside neck reaming and a lot of work to get it to both feed from the magazine and shoot. Brass isn't the easiest to come by for the 45-75, so unless you would rather tinker than shoot, get the 45-60.
Re: 1876 .. 45-75 or .45-60?
What "was" that critter?
-
- Advanced Levergunner
- Posts: 4736
- Joined: Fri Sep 07, 2007 5:00 am
- Location: North Coast of America-Ohio
Re: 1876 .. 45-75 or .45-60?
It is actually a Giant "montanakis jackalopakis " that was well documented a few years ago............................ .
Sorry, spring fever has Me ...and the Three Grandkids just got picked up...............................
Sorry, spring fever has Me ...and the Three Grandkids just got picked up...............................
Re: 1876 .. 45-75 or .45-60?
I have had an original Winchester 1876 in 45-60 for a lot of years, but have never fired it. The bore isn't too bad looking for an old black powder rifle. I don't know if it is feasible to fire smokeless handloads in it or not, but I do have a 40+year old issue of the American Rifleman with an article on loading 45-60s with smokeless and a tuft of toilet paper over the powder. What do you guys think about smokeless in an original?