Got My AccuRizer
Forum rules
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
Welcome to the Leverguns.Com General Discussions Forum. This is a high-class place so act respectable. We discuss most anything here other than politics... politely.
Please post political post in the new Politics forum.
-
- Advanced Levergunner
- Posts: 9039
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Got My AccuRizer
Little bundle of joy arrived by pony express yesterday, and although I haven't had a chance to use it yet I must say I am impressed by the design and execution. If it makes ammo even more accurate and lethal in my CZ bolt gun, I will be even happier.
Thanks for a fine product at a very fair price, Paco.
Bill in Oregon
Thanks for a fine product at a very fair price, Paco.
Bill in Oregon
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: Got My AccuRizer
Bill,
When you do get to test it would you post us a test report? I'm particularly interested in weather or not ammo altered in Paco's tool will feed in lever guns and semi autos. I've read several other reports and to a one they have been from revolver shooters.
TIA
Joe
When you do get to test it would you post us a test report? I'm particularly interested in weather or not ammo altered in Paco's tool will feed in lever guns and semi autos. I've read several other reports and to a one they have been from revolver shooters.
TIA
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
Re: Got My AccuRizer
Sent Paco a check for one on Monday.
I am very anxious to get it and give it a try.
Getting it made for the Colt NF and my Rem. 541S.
If I find it successful I plan to get one in .22 mag. for the
Colt NF mag. cylinder as well.
I am very anxious to get it and give it a try.
Getting it made for the Colt NF and my Rem. 541S.
If I find it successful I plan to get one in .22 mag. for the
Colt NF mag. cylinder as well.
Re: Got My AccuRizer
BTW Bill,
How long did it take till yea got it
Mike
How long did it take till yea got it
Mike
-
- Levergunner 1.0
- Posts: 65
- Joined: Fri Sep 28, 2007 11:33 pm
- Location: Colorado
Re: Got My AccuRizer
J Miller
If you do not get heavy handed it will work fine in autos.
22 JC Higgins
Mark 2 ruger
10/22
Hi Standard Duramatic.
This was what I used and accuracy was
better in all but the Mark 2. This was all
one lot of Blazer. Another brand may have
worked better in the Mark 2.
My .02
The very best to you and yours
Bob
If you do not get heavy handed it will work fine in autos.
22 JC Higgins
Mark 2 ruger
10/22
Hi Standard Duramatic.
This was what I used and accuracy was
better in all but the Mark 2. This was all
one lot of Blazer. Another brand may have
worked better in the Mark 2.
My .02
The very best to you and yours
Bob
- J Miller
- Member Emeritus
- Posts: 14885
- Joined: Sat Mar 31, 2007 7:46 pm
- Location: Not in IL no more ... :)
Re: Got My AccuRizer
Bob,
Thanks for the information.
Joe
Thanks for the information.
Joe
***Be sneaky, get closer, bust the cap on him when you can put the ball where it counts .***
-
- Advanced Levergunner
- Posts: 9039
- Joined: Sun Jun 29, 2008 10:05 am
- Location: Sweetwater, TX
Re: Got My AccuRizer
Mike: It was just a smidge under two weeks from mailing check to opening package. Will report when I get a chance to give Paco's tool a workout.
Re: Got My AccuRizer
Thanks BillBill in Oregon wrote:Mike: It was just a smidge under two weeks from mailing check to opening package. Will report when I get a chance to give Paco's tool a workout.
-
- Levergunner 2.0
- Posts: 420
- Joined: Wed Sep 12, 2007 9:45 am
- Location: Long Island N.Y.
Re: Got My AccuRizer
Does the tool work on copper clad bullets?
-
- Senior Levergunner
- Posts: 1459
- Joined: Wed Feb 06, 2008 6:31 pm
- Location: Arizona Territory
Re: Got My AccuRizer
foxtrapper wrote:Does the tool work on copper clad bullets?
Yes
SASS# 51223
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30
Arizona Cowboy Shooter's Assoc.
Cowtown Cowboy Shooter's Assoc.
Uberti 73/44-40 carbine, Rossi 92/44-40,
Marlin 94CB/44 24" Limited, Winchester 94/30-30