Paco Kelly's Leverguns.com

two bit okie

all of the above are correct. However killing the enemy, by concept means bringing a violent end to their activity. It does appear that the politicians dont mind our guy being kia or wia, but we cant hurt the enemy. I was never in any branch of the military, but it appears that the Marines have the ...

two bit okie

Consider this. If you are at a function at the range, you have to start with an empty chamber. You have to work the action. If a 10 round match, you will shoot till the gun is empty. If a 20 round match, empty the gun, reload, empty again. The point is, to start the shoot, you have to load the tube,...

two bit okie

Am I gonna shoot it???????. I just got it, and the ammo locally is $23.00 a box!!!!!!!!!!!

I do have 100 cases ordered from midway and 100 bullets cast, powder and primers.

GIMMIE A CHANCE!!!!!!!!!!!!

two bit okie

Safe mates. to keep each other company. talk about the same subjects, no talk about brie and cheese.

two bit okie

with the addition of the top rifle, a mod 94, I now have 3 of these lead slingers. the middle one is a marlin 1894, and the bottom one is a legacy/rossi mod 92 both in 44 mag.

two bit okie

I was at my favorite gun shop and this 1969 mod 94 jumped out of the rack and clung to my pants leg and looked at me such pleading eyes that I could not leave in the rack. Swapped an unused and not wanted ruger blackhawk and 50 bucks. near 98% needs only to be shot. http://i34.photobucket.com/albums...

two bit okie

Being new to mod 94's, I was wondering what mods affiecianados make to to stock 94. Mine will not be used for competition, cas, hunting, or any of the other usual activities.

Being from the 1911 set, with all of the mods available, I was wondering what the mods might be for a mod 94.

two bit okie

Is it difficult to change the cartridge carrier from the stamped to the cast, and what, if any, is the advantage of one over the other. rifle is a 1969 vintage mod 94 in 30-30.

two bit okie

Are there some things that can be done to lighten the mainspring on a mod 94 without ruining the reliability. and the free swinging trigger, etc. etc?

two bit okie

where can I go to find the date of mfg for an mod 94, 3267xxx? Gun shop says 2004, but rifle has no safety.

two bit okie

I WILL be getting a mod 94 in 30-30 and shooting exclusily cast bullets. I will load them my self soooooooooo, when preping the cases, do need to bell the cases or just stuff the cast bullet down the throat?

two bit okie

ex has had 2 Irish setters. both had the same doggy IQ of a mildly retarded carrot. The last one was fond of standing out on the deck in the wind, beautiful ears blowing in the wind, and barking. The other dogs came running to join in the barkfest and would just look at her like she was the village ...

two bit okie

had a .54 Renagade for years, finally gave it to my son. a real cannon with 110 grs FF and a maxi ball.

two bit okie

try M&M gunsmith and shop in Arlington Va. They were recommended to me by rossi service center for parts. They are on the internet.

two bit okie

put me in the prefers one piece walnut. I do have big meat hooks so the lever is ok. but the fat forend is still clunky looking.

two bit okie

I also have one of each, about the same age, 4 yrs, both in 44 mag, both feed anything that I put in including my own home cast semiwadcutters. My only real complaint on the marlin is that stupid fat forend. I also prefer the trim look of the rossi reciever. operationally both are more accurate than...

two bit okie

uhhhhhh, who is DRC?????

two bit okie

I have just been fondling my marllin 1894, and notice again that the lever is just two tight. Does anyone know of a slightly larger lever. slightly larger as in 1/2 longer and deeper. just enought to allow a bigger meat hook to fit comfortably.

two bit okie

In the next couple of months I will start shopping for a winchester mod 94. 30-30, 32, or 35. dont really care what bigger caliber. Having never shopped for used lever lever action at all, what are some of the mechanical things to look for. Looks are highly secondary, and some charecter is actually ...

two bit okie

I have decided it is time to give my Rossi mod 92 a nose job. min bbl lenght is 16 ". ? for those who have done it, how much pad do I leave. 16 1/4", 16 1/8"?

two bit okie

and furthermore, to have a shooter like just about any good rifle, to not shoot it is to humiliate it and embaras it in front of the other guns in the safe might as well paint it pink or chartruse. A collecters piece is different, but with over 7 mllion built that will be few and far between.

two bit okie

jmho on safe queens. If you take an older mod 94 and dont shoot it here are some other thing that you might do you would have a rottwieler, german shepard, or doberman and have its teeth removed to make it nicer you would have a labrador retiriever and never let it go into the water you would have a...

two bit okie

while I really appreciate the fab work evidenced by your pics, did you do this because you wanted to do your own loader, or will the lee kit not work on brass. I ask because I have an old lee and will be getting some brass cases to try this in my coach gun side by side. You have inspired me to try it.

two bit okie

try to find cast bullet 30-30's from the factory, try to find cast 318 gr cast in 44 mag, and finally try to find 44 mag for $6.00 for 50.

two bit okie

never malfunctions? NO. MAYBE "NOT YET", Perhaps "not in years". but never. nahhh, I love the darn things.

two bit okie

I am offended that I dont know how I am offended, by offensive offenses, and the offenders have to tell me to be offended indeed.

two bit okie

mine, brand new 2 yrs ago, on sale at BIG 5 sporting goods, 399.99. My son will be taking that one, as I am not a huge Marllin fan. But would in a heartbeat take the cowboy 45-70.

two bit okie

I have a marlin 1894, and while I dont care for the safety, I just ignore the stupid thing. Jmho, if you want the 41, just get it and saftey repladement goodie.

two bit okie

When cutting off a barrel on a rifle. (model 92, 20 " being bobbed to 16 1/4) where is the barrel measured. muzzle to closed bolt, muzzle to back of chamber, or front of chamber?

I am getting bolder and may have to get a hacksaw to cut it myself.

two bit okie

Over on the castboolets site, I have a question about interest for a group buy for the 6 cavity mold for the 170 gr flat nose 30-30 mold. The deal from lee is to get 50 casters and get a great discount on the mold blocks. being lazy as fat hound dog in front of a hot fire in the fireplace, the idea ...

two bit okie

What should I expect to pay to have the barrel on my puma 44 be bobbed to 16 1/4", recrowned, and a new front sight dovetail cut. I, uh.....ummmm, just dont have confidence in my own skill to do such a amputation.

two bit okie

what are the current rules on out of state purchase of long guns. specifically, If I, as an arzona resident go to nevada, virginia, or nc, where my kids live, can I legally purchase a model 94 from either person, pawn shop or gun shop and take it with me.

two bit okie

Does anyone know who, if anyone, makes a 4 or six cavity mold for 30-30 170 gr or larger mold blocks?

two bit okie

you guys are lucky the wm even carries the stuff. Mine here in AZ has not such items. I think WM i s going anti gun.

two bit okie

thanks for all feedback.

I can no longer get out and hunt, or even stand for the cas shooting. All I have left is having cool looking guns. I just watched the duke in stage coach, and the train robbers, and I still think his 92 is cool looking. What can I say???????

two bit okie

I am in the initial steps of fixing up my rossi mod 92. I have the the new wood, not done yet, the large loop lever, installed and working, next is to have the 20" tube shortened to 16 1/4", and I would like have a saddle ring put on, but do not know where to get the "stuff" requ...

two bit okie

I just had my fingers on my rossi and the loading gate IS metal, but the spring follower is plastic.

two bit okie

I shoot 44 mag and have 6 of the them. But I would never knock another man's choice. I have 180's, 200's, and 250's, jacketed and cast. and relativly latly I have been playing with 318 gr cast. all of my guns will take them but heavy loads of 296 (I will not give my charge because someone might put ...

two bit okie

Does anyone know of a source, new or used, for the boxes that speer uses for it's bullets?

I am tired of using baggies or carboard.

two bit okie

went to Phoenix last weekend. lots of primer, could only afford 2 k of winchesters. lottsa ebrs, high prices, not too many rugers.

two bit okie

hello lever action fans. Two bit okie is looking for a set of ajax, (I know they just went out of business), #50 elk antler looking grips for a nm super blackhawk. Thanks for any help or leads in these babies. I have Vaquero with a dragoon grip frame that is very jelous of her sister that has a set ...

two bit okie

I load 6 grs of unique and a 200 gr cast. light even for cas but like a 38 spec.

two bit okie

restocking a rifle, and going to use some stock beding compound, does any have a good suggestion for release to prevent the bedding compund sticking to the metal?

two bit okie

I am in the process of putting new wood on my rossi. I got a new black walnut carbine stock from gunstocks inc and the wood is beautiful. If, as I hope to do in phoenix at the gun show, I find another rossi for a good price, Yeahhh, sure, I will add it to my collection and immediatly order a new sto...

two bit okie

I had a winchester trapper in 44, I have a marlin 1894 in 44 and a rossi in 44 as well. both with 20" bbls. The rossi is getting new wood. and as soon as that is done, it will get a nose job down to 16 1/4". As I can no longer walk to hunt or cas shoot (bad knees) the little carbine will b...

two bit okie

For cas, plinking, and some cases personal defense, the new Vaquero or any of the colt clones should be fine. If you are considering being in territory with unfriendly beasties that can bite back, go with either the vaquero (not NV) or a super blackhawk, or blackhawk in 45 lc or the freedom arms to ...

two bit okie

I got my first super blackhawk in 1972, yup last year of the 3 screw. I bought cases for several years there after amassing 2000. and then stopped. I mean what the heck, 2000 cases for one gun. Fast forward to sons graduating college. How many of you fools have made the statement, " Ya, son's n...

two bit okie

What is everyones favorite finish, linnspeed, or tru oil. The rifle is not a great custom, but at the same time, I do not want to trash the black walnut with a crappy finish. suggestions with pics if possible would be appreciated.

two bit okie

Check out Arizone for gun friendly. and wide open spaces to blast away with out toys. castle doctrine, if you use your gun for defense, they have to prove beyond a reasonable doubt that you DID NOT have reason to fear for your life. a ccw can display his weapon if necessary to prevent trouble withou...

two bit okie

Allrighty, then. I have new wood, fore and aft, for my rossi mod 92. It is inletted, but not finished. I have the linnspeed oil finish coming, but for the smoothing, what kind of suggestions for type and grits of sandpaper. for more details, the little rifle is a 44 mag. I am going to have the barre...

Search found 205 matches