Paco Kelly's Leverguns.com

Nate Kiowa Jones

Well......................................................... :arrow: I could tellya but then I'd have to killya. :twisted: OKOKOK, Port Arthur Texas the capitol of Southwest Louisiana. Cus we got more Cajuns here than Lake Charles do. They all come here to work the oil fields but when they tried to...

Nate Kiowa Jones

Thought you guys would like to see my old WW Greener 12ga. 32" barrel shotgun. Navy Arms imported and rebuilt them back in the days when you could just send them a check and the mail man would drop it off at the front door. Paid $59.00 IIRC Remove one screw and the barrel unscrews. A take down...

Nate Kiowa Jones

I voted 44-40. I guess I'm with the majority on this. But my reasons were simple. The semi bottle necked case works much better for sealing the chamber with lower pressure loads than does a straight walled case. And I prefer calibers what start with the number "4". Joe Plus, any bottle ne...

Nate Kiowa Jones

I guess you could say it's one of my favorites. I have 3 SAA's in 32WCF, two 4 3/4" guns and another 7.5" http://www.stevesgunz.com/imgs/32_20__73_s.jpg I now have three 32WCF rifles. This 92 was made in 1893. It now has a new liner. http://www.stevesgunz.com/imgs/32_20__92.jpg This 73 mad...

Nate Kiowa Jones

From that article Brian Malte, state legislative director for the Brady Campaign to Prevent Gun Violence said; "One of the things we like to point out, especially in the public domain, is the chance that folks who aren't trained with guns will hit innocent bystanders." In many states, incl...

Nate Kiowa Jones

The .357 seems to bring more dough than the .44 mag. Less recoil plus cheaper factory ammo I assume. The nicer ones seem to be in the $800-$900.00 range. Good luck in your search. 1886. Mainly because there were far fewer 357's made compared to the 44 mags. I do believe the B-92 is the best 92 ever...

Nate Kiowa Jones

El Mac wrote:Steve, where do you get a tang sight like that? Who makes it?

I sell them. It's Italian made. I sell them for $139.95 installed or $99.95 DIY.

Nate Kiowa Jones

I charge $139.95 parts and labor to take the gun apart and D&T install the Williams FP on the 92's or un-D&T-ed 94's and reassem. This price includes not only the Williams FP but a barrel dovetail filler blank.

Nate Kiowa Jones

Mr. Kiowa, I've got your DVD on the model 92 and having watched it a couple of times, I've got a question. With my "old eyes" I'm seriously considering a tang sight. However, according to your cleaning instructions, I'll need to remove the tang screw to remove the butt stock. Will I have ...

Nate Kiowa Jones

I guess I will have to give Bob Munden a call he used to do a lot of work on Vaqueros. Griff is he still in business? I have been out of CAS for awhile so have lost track of a lot of people. Hi Jeremy, There is another feller Wes Flowers that is tops for Ruger work. His SASS aka is West Fargo. Wes ...

Nate Kiowa Jones

azoil wrote:What do we need to do in order to take "OUR" country back from Washington?

That's easy. Term limits and loser pay tort reform. On the other end, to receive welfare you gotta do the the whiz quiz.

Nate Kiowa Jones

you think the current ones are bad. how many remember the late 80's early 90's guns. They were all black and if you removered it the wood neven matched. At least they are doing more in brown now and most have somewhat matching wood. I doan know... that's what this one is: http://i35.photobucket.com...

Nate Kiowa Jones

Jim,
Good stuff.

Nate Kiowa Jones

Hobie wrote:Ain't gunshop rumors fun?

Yep, as a matter of fact, went things get boring aound here I make up something just to stir the pot.

Nate Kiowa Jones

oldgerboy wrote:The stock and forearm are plastic

I shortened the forearm back to almost the band step and installed a Marlin tip. I feel the shorter length looks better with the short barrel since the bands are removed and the magazine is shortened.

Is that the Ram-Line 94 youth synthetics?

Nate Kiowa Jones

you think the current ones are bad. how many remember the late 80's early 90's guns. They were all black and if you removered it the wood neven matched. At least they are doing more in brown now and most have somewhat matching wood.

Nate Kiowa Jones

The SHOT show is a great show to go to. I worked in the industry for year's, and I always learned alot at the show. IMO the most important thing to look for at the SHOT show is Co-Op advertising dollar's. All the mfg's budget their Co-Op money on Jan. 1. The SHOT show is the place to take advantage...

Nate Kiowa Jones

Whatever you buy it should be fireproof. Your guns are more likely to burn than be stolen. Unless you have have highly collectable pricy guns it's rather point less to buy a high end safe. Any of the medium priced Cannons will do for most folk. But, if I had it to do over I would have bought a good ...

Nate Kiowa Jones

The early one's not only split the stock in the tang area but the recoil also jumped the mag rubes out. Rossi fixed the mag tube problem by screwing them into the frame. They did add a nylon or plastic bushing through the tang screw hole but it hasn't helped all that much best I can tell. The proble...

Nate Kiowa Jones

Yeah, but if you tell a lie long enough and load enough the intelligent impaired stupidly enhanced will believe it.

Nate Kiowa Jones

If I were to do it without a mill or lathe, I would probably use a Hardened Machinist V. Block. Cut barrel to approx length with hack saw, mount barrel in V Block to where the last few thou are hanging off the end of the V. Block. File away; keep filing on the barrel until the end of the barrel is ...

Nate Kiowa Jones

No need for that, I like it. :D Me2 :lol: That looks like one handy little gun right there now. Wudju do to the butstock? It looks like a cresent butcapped rifle stock cut back to behind the top of the cresent and a shotgun style plate added, is that right? As for the mag hangers I thought about do...

Nate Kiowa Jones

I called Legacy about the Puma 92 45lc and the told me the do not recimend shooting +p loads. And only cowboy loads in the brass frame models, which is what I have. But they are the folks that market the 454cas guns. Any of the book loads for the Rugers or TC's will not be a problem for any of the ...

Nate Kiowa Jones

The video is GREAT! Thank you, thank you, thank you! I tried to de-temper, stretch and re-temper the ejector spring. I was unable to keep it the proper diameter. I was glad I have a box of springs. Buy the spring from Steve. What happens is in most cases the cut off spring starts out just fine but ...

Nate Kiowa Jones

It took awhile for me to get this back up here on the new forum, but here's the info for the DVD and parts for the Rossi made 92 leverguns. Although it's geared toward the Rossi made 92 it will work for any 92 pattern gun. For the original winchester 92 about the only difference is the leaf spring f...

Nate Kiowa Jones

I don't think it's out of line with what some of the other true wholesale distributors are charging. They turn over quite a few firearms, so I'm sure their stock is as current as most any other distributors. JB, JSC is one of my main source. I just check and the cheapest stainless any cal. in not j...

Nate Kiowa Jones

The problem I've had is trying to fix a scratch in one small area. I can buff out the scratch but the finish on that spot never matches the rest. Unless it is something really bad I leave it there. Whatever you use to buff with the grit size should match. Just like sandpaper grit, the various compo...

Nate Kiowa Jones

Well, there's the Rossi in 454 casull. It will also shoot 45lc.

Nate Kiowa Jones

Don't cut it. I have managed to talk EMF into ordering some 16" Stainless 357's. Keep us posted as to when they are available! So can you sell to CA or should I order from EMF and pick up locally then ship to you for your magic? (I plan on a short 357 this year) Jay That's up to you. If you or...

Nate Kiowa Jones

Don't cut it. I have managed to talk EMF into ordering some 16" Stainless 357's.

Nate Kiowa Jones

tcomer wrote:Well now. Fired 5 rounds through it. Magazine slides forward because of the cracked barrel band. This gun is down until the parts come in.

Hi Tim,
I got those parts and I sent you an email.

Nate Kiowa Jones

Do you have any metal buffing equipment. Something like a bench grinder with a 6" sewn moslin wheel and polishing compound like these.

http://www.caswellplating.com/buffs/compound3.html

With this setup you can make it like new in just minutes.

Nate Kiowa Jones

airedaleman wrote:I marked my 28th anniversary today, and I just wanted to thank all of you for being there for me. What a wonderful fellowship!

Congratulation. What a wonderful life it can be if you let your higher power guide you.

Nate Kiowa Jones

Looking at the Rossi catalog I see that every 92 they make has a 1:30 twist rate. I'm pretty sure the loads I'd choose would be tumbling out of those barrels. My 325g cast tumbles out of the Marlin 1:38 barrel. Steve, do you know the Browning twist rate? It's probably pretty slow too. What were the...

Nate Kiowa Jones

I don't think it's going to work too well with out a rim I've never owned a 92 or others of its ilk, so it's not obvious to me that a rim is essential for feeding. My first reaction is it should be possible to shape the 92's cartridge guide so that it functions like the guide on a 95 Win (but I've ...

Nate Kiowa Jones

...Next hopefully the new .327 Federal. Don't hold your breath on that one either. The guides can't be move togather close enough to control the extended 32H&R case. The lower part of the bolt/ejector won't pass through. Even the 32-20 and 25-20 Wins had to have the bolts clearanced to work. As...

Nate Kiowa Jones

I have an Interarms era '92 Trapper that's going to become a takedown. Anyone know whether these were metric or fractional pitch barrel threads? I hate to tear it down until I'm ready to start and finish the job - it just gets too much use. I'll be adding another barrel in .256 WM at the same time....

Nate Kiowa Jones

I was looking at the new offerings of Legacy Sports International in the 92 Pumas and they are showing a couple interesting new series. They show scout model and an XP model designed for Hornady's new Leverevolution in 357 and 44 mag. But ...get this.... they both also come in the 17 Remington. :?:...

Nate Kiowa Jones

I don't think it's out of line with what some of the other true wholesale distributors are charging. They turn over quite a few firearms, so I'm sure their stock is as current as most any other distributors. JB, JSC is one of my main source. I just check and the cheapest stainless any cal. in not j...

Nate Kiowa Jones

Would the Miroku/Winchester & the Browning be one & the same? I suspect they are but what do you guys say? Thanx, jd45 P. S.....I owned a B-92 several years ago, & was very impressed with the fit, finish, AND its accuracy. Wish I still had it. Close but no cigar. I personally think the ...

Nate Kiowa Jones

Thank you for the input, gentlemen. I have handled the rifle, so I'm beyond the picture stage. Sixgun's comment strike a chord, because the action is a bit sticky - the lever really has to worked with authority to activate the lifter. Also, the hammer seems a bit sloshy , and the half-cock can't ev...

Nate Kiowa Jones

Well, I suggest you go turn yourself into the authorities before they come to get you for stealing that Rossi! GREAT buy. At least go back and kiss him. :lol: Email or call. I'm probably have a barrel band for it. As for the tube, you don't need to take it apart. Just push a tight fitting patch thr...

Nate Kiowa Jones

These guns are made by Army Sport now Armi Chiappa. Itâ€™s imported by Cimarron, EMF, Taylors and Charles Daley. The early Armi Sport guns were made from Armi San Marco parts and had some functionality problems. The current guns are much better but they have done some things I think are solutions to...

Nate Kiowa Jones

If it's complete with the dust cover and fully functional with just the percentages of honest wear and the special order features you have discribed I believe $1800 would be a fair deal for you both.

Nate Kiowa Jones

I've been visiting the local clubs for a few months now. Tough decision, sure are a lot of rules. The safety rules are good, but they're not the ones I'm talking about. I would get to buy a new SAA, of course. Actually three new SAA'a. That's cool. I'm just not sure about it. Looks like great fun, ...

Nate Kiowa Jones

Howdy,

You will be glad you decided to sign up. Good info here.

Nate Kiowa Jones

Howdy,

Nate Kiowa Jones

I hope he comes back. He will be missed.

Nate Kiowa Jones

Big Bore 94 wrote:I belive that is a European 220 volt outlet.

Big Bore,
Is the European 220 volt a floating neutral, as in no earth ground?

Nate Kiowa Jones

Hi Randy,

This is their support page.

http://www.iacshotguns.com/support.html

Search found 2486 matches

Re: WW Greener , not a REAL lever gun?

Re: Kiowa Jones M92 and Tang Sight Question

Re: OT (or not) - Ain't gunshop rumors fun?

Re: SHOT Show

DIY DVD for PUMA,EMF,& NAVY 92 by Rossi and some parts

Re: OT - Any friends of Bill out there?

Re: Rossi '92 Barrel

Re: new Puma 92 for 2008